Analysis of IGBT power cycling capabilities used in Doubly Fed Induction Generator wind power system

The Doubly Fed Induction Generator (DFIG) is one of the most popular topologies applied in wind power systems. Its main advantage is to adjust the speed of a large system with much lower power converters. This is because its rotor side converter (RSC) operates under slip frequency and it needs only to support slip power to the overall system. However, this slip frequency is much lower than the grid frequency and IGBTs in the RSC are susceptible to power cycling failures. This paper provides a method to analyze the power cycle capability of a DFIG power converter under wind power applications. Different current control methods, including minimal stator losses, minimal rotor losses and minimal overall losses, are analyzed and compared. It is verified that the sizes of the IGBT must be selected appropriately to avoid earlier power cycling failures. Designing a wind power converter into the targeted system is critical for cost reduction without sacrificing the reliability of the whole system

[1]  Lixiang Wei,et al.  Junction Temperature Prediction of a Multiple-chip IGBT Module under DC Condition , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[2]  H. Reichl,et al.  Lifetime Estimation for Wire Bond Interconnections using Life-Cycle-Information Modules with Implemented Models , 2005, 2005 4th International Symposium on Environmentally Conscious Design and Inverse Manufacturing.

[3]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[4]  A. Dasgupta,et al.  Failure mechanism models for cyclic fatigue , 1993 .

[5]  Wolfgang Fichtner,et al.  Lifetime prediction and design of reliability tests for high-power devices in automotive applications , 2003 .

[7]  M. Bartram,et al.  Doubly-fed-machines in wind-turbine systems: is this application limiting the lifetime of IGBT-frequency-converters? , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[8]  Longya Xu,et al.  Torque and reactive power control of a doubly-fed induction machine by position sensorless scheme , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[9]  Birgitte Bak-Jensen,et al.  Conceptual survey of Generators and Power Electronics for Wind Turbines , 2001 .

[10]  G. Nicoletti,et al.  Fast power cycling test of IGBT modules in traction application , 1997, Proceedings of Second International Conference on Power Electronics and Drive Systems.

[11]  Stefan Lundberg,et al.  Energy Efficiency Comparison of Electrical Systems for Wind Turbines , 2002 .