Compliance Analysis for Flow Effector Actuator Based on Serial Compliant Mechanism With Double Guide Ends
暂无分享,去创建一个
Gang Wang | Jian Wang | Hongying Yu | Fei Yang | Honghao Yue | Yifan Lu | Miao Wu | G. Wang | Miao Wu | H. Yue | Hongyin Yu | Fei Yang | Yifan Lu | Jian Wang
[1] Nicolae Lobontiu,et al. Analytical model of displacement amplification and stiffness optimization for a class of flexure-based compliant mechanisms , 2003 .
[2] N. Lechevin,et al. Synthesis and Experimental Validation of Two-Step Variable-Structure Control of a Micro-Actuated Flow Effector , 2007, 2007 American Control Conference.
[3] Nicolae Lobontiu. Compliance-based matrix method for modeling the quasi-static response of planar serial flexure-hinge mechanisms , 2014 .
[4] S. Fatikow,et al. Hybrid flexure hinges. , 2013, The Review of scientific instruments.
[5] Zhijiang Du,et al. Static deformation modeling and analysis of flexure hinges made of a shape memory alloy , 2016 .
[6] Xianmin Zhang,et al. Design of single-axis flexure hinges using continuum topology optimization method , 2014 .
[7] Nicolae Lobontiu,et al. Compliant Mechanisms: Design of Flexure Hinges , 2002 .
[8] Wei Xu,et al. Flexure hinges for piezoactuator displacement amplifiers: flexibility, accuracy, and stress considerations , 1996 .
[9] Nicolae Lobontiu,et al. Corner-Filleted Flexure Hinges , 2001 .
[10] Fei Yang,et al. SMA actuator design and analysis for forebody active disturbance flow control on slender body , 2017, 2017 IEEE International Conference on Information and Automation (ICIA).
[11] Salimuddin Zahir,et al. Computational Aerodynamic Interaction of Hypersonic Flow with Pin-Protuberance on Blunted Cones , 2014 .
[12] Zongquan Deng,et al. Air rudder mechanism dynamics considering two elements: Joint clearance and link flexibility , 2017 .
[13] Kevin Massey,et al. Optimized Guidance of a Supersonic Projectile using Pin Based Actuators , 2005 .
[14] Mark Costello,et al. Actuator Design and Flight Testing of an Active Microspoiler-Equipped Projectile , 2017 .
[15] Mark Costello,et al. Control Authority of a Projectile Equipped With an Internal Unbalanced Part , 2006 .
[16] Z. Deng,et al. A continuous contact force model of planar revolute joint based on fitting method , 2017 .
[17] Eugenio Dragoni,et al. Modelling, simulation and characterization of a linear shape memory actuator with compliant bow-like architecture , 2015 .
[18] Slaviša Šalinić,et al. A new pseudo-rigid-body model approach for modeling the quasi-static response of planar flexure-hinge mechanisms , 2018, Mechanism and Machine Theory.
[19] Ilmars Celmins. Design and Evaluation of an Electromechanical Actuator for Projectile Guidance , 2007 .
[20] Sergej Fatikow,et al. Design and analysis of a high-accuracy flexure hinge. , 2016, The Review of scientific instruments.
[21] Ross Mahoney,et al. Introduction - The Cavalry of the Clouds? New Research in the Development and Experience of Air Power in the British Empire during the First World War , 2018 .
[22] Nicolae Lobontiu,et al. Design of symmetric conic-section flexure hinges based on closed-form compliance equations , 2002 .
[23] Nicolas Lechevin,et al. Development of a Shape Memory Alloy-based Micro-Flow Effector for Missile Side Force Control , 2007 .