Dielectric breakdown of polyimide films: Area, thickness and temperature dependence

Changes in the dielectric breakdown field of polyimide (PI) films have been studied from 25 to 400°C under dc ramps. Both the area (from 0.0707 to 19.635 mm2) and thickness (from 1.4 to 6.7 ¿m) dependences of the dielectric breakdown field have been carried out using the Weibull distribution function. The 63%-breakdown field value (i.e. the ¿-scale parameter) of PI shows a decrease with increasing area, thickness and temperature but always remains above 2 MV/cm. The ß-scale parameter of the distribution shows a typical decrease with increasing area, however, it exhibits an increase with increasing thickness. This 'curious' behavior is discussed on the basis of the percolation theory. No temperature-dependence is clearly observed. Moreover, physical interpretations are carried out using the pre-breakdown current analysis.

[1]  M. Ieda,et al.  New Approach to Breakdown Study by Measuring Pre-Breakdown Current in Insulating Materials , 1984 .

[2]  T. Lebey,et al.  Conductivity spectroscopy in aromatic polyimide from 200to400°C , 2007 .

[3]  K. Iida,et al.  Dielectric Breakdown and Molecular Orientation of Poly( 4,4′-Oxydiphenylene Pyromellitimide) , 1994 .

[4]  T. Schutte,et al.  DC breakdown strength of polypropylene films: area dependence and statistical behavior , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.

[5]  J. Sune,et al.  New physics-based analytic approach to the thin-oxide breakdown statistics , 2001, IEEE Electron Device Letters.

[6]  N. Shimizu,et al.  Effect of space con conduction current and breakdown of polyimide films , 2004, Proceedings of the 2004 IEEE International Conference on Solid Dielectrics, 2004. ICSD 2004..

[7]  T. Lebey,et al.  Investigations on high temperature polyimide potentialities for silicon carbide power device passivation , 2006 .

[8]  U. Gafvert,et al.  Area dependence of breakdown strength of polymer films: automatic measurement method , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.

[9]  T. Lebey,et al.  High Temperature Dielectric Behavior of Al/Polyimide/Al Capacitor Structures , 2006, 2006 IEEE Conference on Electrical Insulation and Dielectric Phenomena.

[10]  R. Campbell,et al.  High Temperature Electronics. , 1971 .

[11]  K. Miyairi.  Frequency Dependent Dielectric Breakdown of Thin Polyimide Films Prepared by Vapor Deposition Polymerization , 2001 .

[12]  N. Hayakawa,et al.  Weibull statistical analysis of area and volume effects on the breakdown strength in liquid nitrogen , 1995 .

[13]  T. Lebey,et al.  Weibull Statistical Dielectric Breakdown in Polyimide up to 400°C , 2008, 2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[14]  S. Ul-Haq,et al.  Weibull statistical analysis of area effect on the breakdown strength in polymer films , 2002, Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[15]  P. Bjellheim,et al.  AC breakdown strength of aromatic polymers under partial discharge reducing conditions , 1994 .

[16]  P. Bjellheim,et al.  Electric breakdown strength of aromatic polymers: dependence on film thickness and chemical structure , 1991 .

[17]  W. G. Chadband.  Electrical Degradation and Breakdown in Polymers , 1992 .

[18]  John C. Fothergill,et al.  Estimating the cumulative probability of failure data points to be plotted on Weibull and other probability paper , 1990 .

[19]  Jordi Suñé,et al.  On the Weibull shape factor of intrinsic breakdown of dielectric films and its accurate experimental determination. Part II: experimental results and the effects of stress conditions , 2002 .

[20]  C. Laurent,et al.  Weibull statistics in short-term dielectric breakdown of thin polyethylene films , 1993 .

[21]  S. Laihonen.  Polypropylene : Morphology, defects and electrical breakdown , 2005 .

[22]  C. Wong,et al.  Polymers for electronic and photonic applications , 1993 .

[23]  Masayuki Ieda,et al.  Dielectric Breakdown Process of Polymers , 1980, IEEE Transactions on Electrical Insulation.

[24]  D. Makino.  Application of polyimide resin to semiconductor devices in Japan , 1988, IEEE Electrical Insulation Magazine.

[25]  E. Tuncer,et al.  Breakdown statistics of polyimide at low temperatures , 2006, 2006 IEEE Conference on Electrical Insulation and Dielectric Phenomena.

[26]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[27]  G. Raju,et al.  Breakdown voltages of polymers in the temperature range 23/spl deg/-250/spl deg/C , 2003 .

[28]  Hitoshi Okubo,et al.  Insulation optimization by electrode contour modification based on breakdown area/volume effects , 2001 .

[29]  Masayuki Hikita,et al.  Area and volume effects on breakdown strength in liquid nitrogen , 1995 .

[30]  J. Stathis.  Percolation models for gate oxide breakdown , 1999 .

[31]  M. Kosaki,et al.  Self-healing breakdown and electrical conduction of polyimide thin films , 1998, Proceedings of 1998 International Symposium on Electrical Insulating Materials. 1998 Asian International Conference on Dielectrics and Electrical Insulation. 30th Symposium on Electrical Insulating Ma.

[32]  Frank G. Shi,et al.  Thickness dependent dielectric strength of a low-permittivity dielectric film , 2001 .

[33]  John R. Williams,et al.  SiC Power Device Packaging Technologies for 300 to 350°C Applications , 2005 .

[34]  M. Iwamoto.  Electrical properties of MIM junctions with ultra-thin polyimide Langmuir-Blodgett films , 1990 .

[35]  E. Sugimoto.  Applications of polyimide films to the electrical and electronic industries in Japan , 1989, IEEE Electrical Insulation Magazine.

[36]  Masayuki Hikita,et al.  High-field conduction and breakdown in insulating polymers. Present situation and future prospects , 1994 .

[37]  P. Bjellheim,et al.  Aromatic polyimides : synthesis, characterization and evaluation of electric strength , 1993 .

[38]  L. Ekstrom,et al.  HIGH-TEMPERATURE SEMICONDUCTOR DEVICES , 1959 .

[39]  J. O'dwyer,et al.  Breakdown in Solid Dielectrics , 1982, IEEE Transactions on Electrical Insulation.