Fe-Nx/C assisted chemical-mechanical polishing for improving the removal rate of sapphire

[1]  Henry W. Gutsche.  Polishing of Sapphire with Colloidal Silica , 1978 .

[2]  B. Hader,et al.  Precision Measurements Of Material-Removal Rates In Superpolishing Sapphire , 1989, Other Conferences.

[3]  P. Sherwood,et al.  Valence band spectra of aluminum oxides, hydroxides, and oxyhydroxides interpreted by X.alpha. calculations , 1992 .

[4]  S. Nakamura.  InGaN-BASED LASER DIODES , 1998 .

[5]  J W Orton,et al.  Group III nitride semiconductors for short wavelength light-emitting devices , 1998 .

[6]  John C. Lambropoulos,et al.  Correlation of crystallographic orientation with processing of sapphire optics , 1999, Defense, Security, and Sensing.

[7]  Xiuling Li,et al.  Metal-assisted chemical etching in HF/H2O2 produces porous silicon , 2000 .

[8]  Jianbin Luo,et al.  CMP of hard disk substrate using a colloidal SiO2 slurry: preliminary experimental investigation , 2004 .

[9]  R. Sabia,et al.  Chemical mechanical polishing (CMP) anisotropy in sapphire , 2004 .

[10]  R. Molnar,et al.  Structure–property relationships in porous GaN generated by Pt-assisted electroless etching studied by Raman spectroscopy , 2004 .

[11]  Joon-Yong Yoon,et al.  Chemical mechanical polishing by colloidal silica-based slurry for micro-scratch reduction , 2004 .

[12]  Oxide-chemical mechanical polishing characteristics using silica slurry retreated by mixing of original and used slurry , 2005 .

[13]  A study of intensity of tribochemical contact interaction between a polishing compound and sapphire in machining , 2008 .

[14]  M. C. Rangel,et al.  A comparison between the precipitation and impregnation methods for water gas shift catalysts , 2008 .

[15]  Zhitang Song,et al.  Planarization machining of sapphire wafers with boron carbide and colloidal silica as abrasives , 2009 .

[16]  Satish T. S. Bukkapatnam,et al.  Sensor-based modeling of slurry chemistry effects on the material removal rate (MRR) in copper-CMP process , 2009 .

[17]  Branko N. Popov,et al.  Development of non-precious metal oxygen-reduction catalysts for PEM fuel cells based on N-doped ordered porous carbon , 2009 .

[18]  T. Fuyuki,et al.  Reduction of Surface Roughness of 4H-SiC by Catalyst-Referred Etching , 2010 .

[19]  Xiaodong He,et al.  Preparation, quality characterization, service performance evaluation and its modification of sapphire crystal for optical window and dome application , 2010 .

[20]  Jin-Goo Park,et al.  Synthesis of Fe metal precipitated colloidal silica and its application to W chemical mechanical polishing (CMP) slurry. , 2010, Journal of colloid and interface science.

[21]  Branko N. Popov,et al.  Studies of oxygen reduction reaction active sites and stability of nitrogen-modified carbon composite catalysts for PEM fuel cells , 2010 .

[22]  I. Sokolov,et al.  Influence of adhesion of silica and ceria abrasive nanoparticles on Chemical–Mechanical Planarization of silica surfaces , 2011 .

[23]  Jianbin Luo,et al.  Effects of the ultrasonic flexural vibration on the interaction between the abrasive particles; pad and sapphire substrate during chemical mechanical polishing (CMP) , 2011 .

[24]  G. Pan,et al.  Preparation of silane modified SiO2 abrasive particles and their Chemical Mechanical Polishing (CMP) performances , 2011 .

[25]  Michio Uneda,et al.  Ultraprecision CMP for sapphire, GaN, and SiC for advanced optoelectronics materials , 2012 .

[26]  E. A. Vovk,et al.  Mechanism of the interaction between Al2O3 and SiO2 during the chemical-mechanical polishing of sapphire with silicon dioxide , 2012, Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques.

[27]  Atomically Smooth Gallium Nitride Surfaces Prepared by Chemical Etching with Platinum Catalyst in Water , 2012 .

[28]  T. Maiyalagan,et al.  Review on Recent Progress in Nitrogen-Doped Graphene: Synthesis, Characterization, and Its Potential Applications , 2012 .

[29]  M. Fu,et al.  Synthesis of non-rigid core-shell structured PS/SiO2 composite abrasives and their oxide CMP performance , 2012 .

[30]  Kazuto Yamauchi,et al.  Structural and chemical characteristics of atomically smooth GaN surfaces prepared by abrasive-free polishing with Pt catalyst , 2012 .

[31]  David Dornfeld,et al.  Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes , 2013 .

[32]  Xiaolei Shi,et al.  Extended study of the atomic step-terrace structure on hexagonal SiC (0 0 0 1) by chemical-mechanical planarization , 2013 .

[33]  The influence of abrasive particle size in copper chemical mechanical planarization , 2013 .

[34]  G. Pan,et al.  Nitrogen/sulfur co-doped non-noble metal material as an efficient electrocatalyst for the oxygen reduction reaction in alkaline media , 2014 .

[35]  S. Babu,et al.  Role of ionic strength in chemical mechanical polishing of silicon carbide using silica slurries , 2014 .