Generation of a Selected Lamb Mode by Piezoceramic Transducers: Application to Nondestructive Testing of Aeronautical Structures

The motivation of the this work is highlighted by the need for the Non-Destructive Testing (NDT) of aircraft, petrochemical and naval structures. Functioning conditions of these structures and the time factor can lead to serious damage. The most appropriate NDT technique to plate-like structures seems to be guided ultrasonics Lamb waves [1]. These waves can carry out energy over long distances and have the potential to be sensitive to several types of defects. Consequently, their use allows fast and efficient inspections of industrial structures. However, the multimode and dispersive nature of Lamb modes make the interpretation of the received ultrasonic signals complex and ambiguous in presence of discontinuities. Moreover, the generation and reception of a selected Lamb mode by transducers remains a difficult task due to the complexity of guided waves.

[1]  Peter Cawley,et al.  Experimental and numerical evaluation of electromagnetic acoustic transducer performance on steel materials , 2012 .

[2]  Suresh Bhalla,et al.  High frequency piezoelectric signatures for diagnosis of seismic/blast induced structural damages , 2004 .

[3]  Michel Castaings,et al.  Modal decomposition method for modeling the interaction of Lamb waves with cracks. , 2002, The Journal of the Acoustical Society of America.

[4]  Y. Lee,et al.  Miniature piezoelectric conical transducer: fabrication, evaluation and application. , 2006, Ultrasonics.

[5]  Younho Cho,et al.  Estimation of ultrasonic guided wave mode conversion in a plate with thickness variation , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[6]  M. O. Si-Chaib,et al.  Applications of ultrasonic reflection mode conversion transducers in NDE , 2000 .

[7]  P. Cawley,et al.  The low-frequency reflection and scattering of the S0 Lamb mode from a circular through-thickness hole in a plate: Finite Element, analytical and experimental studies. , 2002, The Journal of the Acoustical Society of America.

[8]  M. Lowe,et al.  Low-frequency reflection characteristics of the s0 lamb wave from a rectangular notch in a plate. , 2002, The Journal of the Acoustical Society of America.

[9]  L. G. Ullate,et al.  A small 2D ultrasonic array for NDT applications , 2003 .

[10]  Peter Cawley,et al.  A 2-dimensional Fourier transform method for the quantitative measurement of Lamb modes , 1990, IEEE Symposium on Ultrasonics.

[11]  Joseph L. Rose,et al.  An elastodynami`c hybrid boundary element study for elastic guided wave interactions with a surface breaking defect , 2000 .

[12]  Barry E. Jones,et al.  A self-calibrating piezoelectric transducer with integral sensor for in situ energy calibration of acoustic emission , 2002 .

[13]  R. N. Swamy,et al.  Application of low-profile piezoceramic transducers for health monitoring of concrete structures , 2008 .

[14]  Emmanuel Moulin,et al.  Study of the fundamental Lamb modes interaction with symmetrical notches , 2008 .

[15]  Bruno Morvan,et al.  Propagation of Lamb waves in a plate with a periodic grating: Interpretation by phonon , 2005 .

[16]  Takahiro Hayashi,et al.  Single mode extraction from multiple modes of lamb wave and its application to defect detection , 2003 .

[17]  L. Wang,et al.  Scattering of elastic waves by a crack in a isotropic plate , 1997 .

[18]  Cheng-Hsien Chung,et al.  Fabrication of poly(vinylidene fluoride-trifluoroethylene) ultrasound focusing transducers and measurements of elastic constants of thin plates , 2010 .

[19]  P D Wilcox,et al.  Flexible piezoelectric transducer for ultrasonic inspection of non-planar components. , 2008, Ultrasonics.

[20]  Erik Blomme,et al.  Air-coupled ultrasonic NDE: experiments in the frequency range 750 kHz–2 MHz , 2002 .

[21]  H. Lamb.  On waves in an elastic plate , 1917 .

[22]  D. Roy Mahapatra,et al.  Ultrasonic Lamb wave based monitoring of corrosion type of damage in plate using a circular array of piezoelectric transducers , 2011 .

[23]  Jing Jin,et al.  Wave boundary element to study Lamb wave propagation in plates , 2005 .

[24]  Emmanuel Moulin,et al.  Study of the fundamental Lamb modes interaction with asymmetrical discontinuities , 2008 .

[25]  Marc Duquennoy,et al.  Ultrasonic characterization of residual stresses in steel rods using a laser line source and piezoelectric transducers , 2001 .

[26]  J. Assaad,et al.  Signal processing for damage detection using two different array transducers. , 2004, Ultrasonics.

[27]  R.W.B. Stephens,et al.  IEEE ultrasonics symposium , 1972 .

[29]  B. Auld,et al.  Acoustic fields and waves in solids , 1973 .

[30]  Kazutaka Fujita,et al.  JSME Int. J. , 1994 .