Flow field structure design modification with helical baffle for proton exchange membrane fuel cell

[1]  Jiang Xiaohui,et al.  Characteristics of proton exchange membrane fuel cell considering “dot matrix” gas distribution zones and waveform staggered flow field with cooling channels , 2022, Energy Conversion and Management.

[2]  Jiqing Chen,et al.  A review of proton exchange membrane fuel cell's bipolar plate design and fabrication process , 2022, Journal of Power Sources.

[3]  Ben Chen,et al.  Effect of Baffle Dimensionless Size Factor on the Performance of Proton Exchange Membrane Fuel Cell , 2022, Energies.

[4]  Jiqing Chen,et al.  A review of proton exchange membrane fuel cell water management: Membrane electrode assembly , 2022, Journal of Power Sources.

[5]  Liu Shun,et al.  A numerical study on the performance of PEMFC with wedge-shaped fins in the cathode channel , 2021, International Journal of Hydrogen Energy.

[6]  Qing-song Zuo,et al.  Investigations on a new C-GPFs with electric heating for enhancing the integrated regeneration performance under critical parameters , 2021 .

[7]  Xiao-dong Wang,et al.  Geometry optimization of a novel M-like flow field in a proton exchange membrane fuel cell , 2020 .

[8]  Yanzhou Qin,et al.  Numerical and experimental investigation of baffle plate arrangement on proton exchange membrane fuel cell performance , 2020 .

[9]  Y. Sahli,et al.  3D investigation of the channel cross-section configuration effect on the power delivered by PEMFCs with straight channels , 2020 .

[10]  J. E,et al.  Effect of critical dual-carrier structure parameters on performance enhancement of a dual-carrier catalytic converter and the gasoline engine system , 2020 .

[11]  Min-Soo Kim,et al.  Study on the performance improvement of polymer electrolyte membrane fuel cell with inclined channel shape , 2019, Electrochimica Acta.

[12]  Guobin Zhang,et al.  A dot matrix and sloping baffle cathode flow field of proton exchange membrane fuel cell , 2019, Journal of Power Sources.

[13]  Fang Ye,et al.  Modification of the two-fluid model and experimental study of proton exchange membrane fuel cells with baffled flow channels , 2019, Energy Conversion and Management.

[14]  E. Afshari,et al.  Three-dimensional multiphase model of proton exchange membrane fuel cell with honeycomb flow field at the cathode side , 2019, Journal of Cleaner Production.

[15]  Guobin Zhang,et al.  Large-scale multi-phase simulation of proton exchange membrane fuel cell , 2019, International Journal of Heat and Mass Transfer.

[16]  L. Xing,et al.  Numerical matching of anisotropic transport processes in porous electrodes of proton exchange membrane fuel cells , 2019, Chemical Engineering Science.

[17]  Hang Guo,et al.  Baffle shape effects on mass transfer and power loss of proton exchange membrane fuel cells with different baffled flow channels , 2019, International Journal of Energy Research.

[18]  K. Jiao,et al.  Numerical investigation of innovative 3D cathode flow channel in proton exchange membrane fuel cell , 2018 .

[19]  Qing Du,et al.  Effects of needle orientation and gas velocity on water transport and removal in a modified PEMFC gas flow channel having a hydrophilic needle , 2018, International Journal of Energy Research.

[20]  B. Sundén,et al.  Effects of agglomerate model parameters on transport characterization and performance of PEM fuel cells , 2018 .

[21]  I. Korkischko,et al.  Shape Optimization of PEMFC Flow‐channel Cross‐Sections , 2017 .

[22]  S. Ookawara,et al.  Efficient fuel utilization by enhancing the under-rib mass transport using new serpentine flow field designs of direct methanol fuel cells , 2017 .

[23]  Erik Kjeang,et al.  Three-dimensional phase segregation of micro-porous layers for fuel cells by nano-scale X-ray computed tomography , 2016 .

[24]  M. Kermani,et al.  Enhancement of PEM fuel cell performance by flow channel indentation , 2016 .

[25]  Xianguo Li,et al.  Numerical estimation of the effective electrical conductivity in carbon paper diffusion media , 2012 .

[26]  Andreas Wiegmann,et al.  Estimating effective thermal conductivity in carbon paper diffusion media , 2010 .

[27]  Abel Hernandez-Guerrero,et al.  Current density and polarization curves for radial flow field patterns applied to PEMFCs (Proton Exchange Membrane Fuel Cells) , 2010 .

[28]  Xianguo Li,et al.  Correlation for the Effective Gas Diffusion Coefficient in Carbon Paper Diffusion Media , 2009 .

[29]  M. M. Tomadakis,et al.  Viscous Permeability of Random Fiber Structures: Comparison of Electrical and Diffusional Estimates with Experimental and Analytical Results , 2005 .

[30]  Göran Lindbergh,et al.  Flooding of Gas Diffusion Backing in PEFCs Physical and Electrochemical Characterization , 2004 .

[31]  Xiao-dong Wang,et al.  Performance study on a stepped flow field design for bipolar plate in PEMFC , 2021 .

[32]  Ebrahim Afshari,et al.  An investigation of the PEM fuel cells performance with partially restricted cathode flow channels and metal foam as a flow distributor , 2017 .

[33]  Qing Du,et al.  Effective removal and transport of water in a PEM fuel cell flow channel having a hydrophilic plate , 2014 .