High-accuracy resolver-to-digital conversion via phase locked loop based on PID controller

The problem of resolver-to-digital conversion (RDC) is transformed into the problem of angle tracking control, and a phase locked loop (PLL) method based on PID controller is proposed in this paper. This controller comprises a typical PI controller plus an incomplete differential which can avoid the amplification of higher-frequency noise components by filtering the phase detection error with a low-pass filter. Compared with conventional ones, the proposed PLL method makes the converter a system of type III and thus the conversion accuracy can be improved. Experimental results demonstrate the effectiveness of the proposed method.

[1]  Chandra Mohan Reddy Sivappagari,et al.  Modified ATO algorithm based high accuracy RDC using pulse excitation , 2014, 2014 First International Conference on Automation, Control, Energy and Systems (ACES).

[2]  Ki-Chan Kim,et al.  Study on the Optimal Design of a Novel Slotless Resolver by FEM , 2014, IEEE Transactions on Magnetics.

[3]  In-Joong Ha,et al.  A resolver-to-digital conversion method for fast tracking , 1992, IEEE Trans. Ind. Electron..

[4]  Abdullah Al Mamun,et al.  A Demodulation Technique for Spindle Rotor Position Detection With Resolver , 2013, IEEE Transactions on Magnetics.

[5]  Davood Arab Khaburi,et al.  Software-Based Resolver-to-Digital Converter for DSP-Based Drives Using an Improved Angle-Tracking Observer , 2012, IEEE Transactions on Instrumentation and Measurement.

[6]  Zhong Wu,et al.  Composite state observer for resolver-to-digital conversion , 2017 .

[7]  Bin Zhou,et al.  A Novel Single-Excitation Capacitive Angular Position Sensor Design , 2016, Sensors.

[8]  Joan Rull-Duran,et al.  High-Accuracy All-Digital Resolver-to-Digital Conversion , 2012, IEEE Transactions on Industrial Electronics.