Development and characterization of retro-reflective colored tiles for advanced building skins

Abstract RR materials, able to reflect the solar radiation mainly toward the incident direction, are a strategy to mitigate the Urban Heat Island (UHI) phenomenon, by reducing the heat trapped inside the urban canyon. This paper introduces new ceramic tiles for outdoor applications properly treated to get RR optic properties. Traditional colored tiles were covered with a UV resistant, transparent paint containing RR microspheres for exterior applications, through an ad-hoc continuous tape casting process, developed for this specific application. The goal is to produce RR tiles through industrial continuous process in order to ensure the penetration of such innovative building materials in the market. Three types of microspheres were tested: i) clear barium titanate glass microspheres; ii) hemispherically aluminum coated barium titanate glass microspheres; iii) hemispherically aluminum coated barium titanate glass microspheres with an additional fluoropolymer coating. The obtained tiles were investigated with a spectrophotometric analysis, a study of the spatial distribution of the reflected radiation, a colorimetric analysis to evaluate changes in tiles’ original color. Reflectance is increased by clear barium titanate glass microspheres, while is almost halved by aluminum-coated spheres. All the three types of microspheres provide strong RR behavior for incident light directions from 0° to 60° with respect to the surface normal. Nevertheless, the aluminum-coated microspheres change completely the tiles’ original color, making the application of the aluminum RR tiles very limited. Clear barium microspheres instead improve the optic properties of the original tiles, with negligible effects on the color.

[1]  A. Rosenfeld,et al.  Global cooling: increasing world-wide urban albedos to offset CO2 , 2009 .

[2]  A. Pisello,et al.  Albedo control as an effective strategy to tackle Global Warming: A case study , 2014 .

[3]  Elena Morini,et al.  Integrated improvement of occupants' comfort in urban areas during outdoor events , 2015 .

[4]  H. Akbari,et al.  Three decades of urban heat islands and mitigation technologies research , 2016 .

[5]  Ferdinando Salata,et al.  Heading towards the nZEB through CHP+HP systems. A comparison between retrofit solutions able to increase the energy performance for the heating and domestic hot water production in residential buildings , 2017 .

[6]  C. Cartalis,et al.  On the impact of urban heat island and global warming on the power demand and electricity consumption of buildings—A review , 2015 .

[7]  Elena Morini,et al.  Beneficial effects of retroreflective materials in urban canyons: results from seasonal monitoring campaign , 2015 .

[8]  Ali G. Touchaei,et al.  The Impact of Albedo Increase to Mitigate the Urban Heat Island in Terni (Italy) Using the WRF Model , 2016 .

[9]  M. Santamouris,et al.  Heat Island Research in Europe: The State of the Art , 2007 .

[10]  A. Presciutti,et al.  Optic-energy performance improvement of exterior paints for buildings , 2017 .

[11]  M. Santamouris,et al.  A study of the thermal performance of reflective coatings for the urban environment , 2006 .

[12]  Maria Kolokotroni,et al.  A validated methodology for the prediction of heating and cooling energy demand for buildings within the Urban Heat Island: Case-study of London , 2010 .

[13]  Elisabetta Anderini,et al.  A carbon footprint and energy consumption assessment methodology for UHI-affected lighting systems in built areas , 2016 .

[14]  H. Akbari,et al.  Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions , 2007 .

[15]  Anna Laura Pisello,et al.  An energy-balanced analytic model for urban heat canyons: comparison with experimental data , 2013 .

[16]  Jihui Yuan,et al.  A method to measure retro-reflectance and durability of retro-reflective materials for building outer walls , 2015 .

[17]  A. Synnefa,et al.  On the Use of Cool Materials as a Heat Island Mitigation Strategy , 2008 .

[18]  A. Pisello,et al.  Analysis of retro-reflective surfaces for urban heat island mitigation: A new analytical model , 2014 .

[19]  M. Santamouris,et al.  Analyzing the heat island magnitude and characteristics in one hundred Asian and Australian cities and regions. , 2015, The Science of the total environment.

[20]  Andrea Presciutti,et al.  Retroreflective façades for urban heat island mitigation: Experimental investigation and energy evaluations , 2015 .

[21]  H. Taha.  Meso-urban meteorological and photochemical modeling of heat island mitigation , 2008 .

[22]  H. Frumkin,et al.  Urban Form and Extreme Heat Events: Are Sprawling Cities More Vulnerable to Climate Change Than Compact Cities? , 2010, Environmental health perspectives.

[23]  Makoto Taniguchi,et al.  Urban warming trends in several large Asian cities over the last 100 years. , 2009, The Science of the total environment.

[24]  H. S. Bagiorgas,et al.  On the impact of temperature on tropospheric ozone concentration levels in urban environments , 2008 .

[25]  A. Rosenfeld,et al.  COOL COMMUNITIES: STRATEGIES FOR HEAT ISLAND MITIGATION AND SMOG REDUCTION , 1998 .

[26]  M. Santamouris.  Cooling the cities – A review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments , 2014 .

[27]  Yu Chen,et al.  Tropical Urban Heat Islands - Climate Buildings and Greenery , 2008 .