Probing the annealing induced molecular ordering in bulk heterojunction polymer solar cells using in-situ Raman spectroscopy

Abstract We have carried out temperature dependent in-situ Raman as well as optical microscopy of poly(3-hexylthiophene) and [6,6]-phenyl-C 71 butyric acid methyl ester (P3HT:PCBM) films to investigate the structural and morphological evolution during heating and cooling cycles of thermal annealing. The full-width half-maximum of symmetric CaC stretching mode, CaC/C–C intensity ratio and Raman shift of CaC mode of P3HT measured during heating upto 130 °C as well as subsequent cooling revealed that: (i) molecular disorder in P3HT chains increase during heating cycle and (ii) on cooling the molecular ordering enhances rapidly at ~100 °C. However, heating to higher temperatures (>150 °C) leads to the formation of PCBM aggregates. The mechanism of morphology evolution in P3HT:PCBM films envisaged through in-situ Raman and optical microscopy has been confirmed by other ex-situ techniques, such as, atomic force microscopy, scanning electron microscopy, UV–vis spectroscopy and X-ray elemental mapping. A correlation between the morphological evolution and various photovoltaic parameters of the fabricated P3HT:PCBM solar cells has been established.

[1]  Paul Heremans,et al.  P3HT/PCBM bulk heterojunction solar cells: Relation between morphology and electro-optical characteristics , 2006 .

[2]  W. Su,et al.  Quantitative nanoscale monitoring the effect of annealing process on the morphology and optical properties of poly(3-hexylthiophene)/[6,6]-phenyl C61-butyric acid methyl ester thin film used in photovoltaic devices , 2009 .

[3]  Jenny Nelson,et al.  Factors Limiting Device Efficiency in Organic Photovoltaics , 2013, Advanced materials.

[4]  S. Li,et al.  Electric field-assisted self-organization of polymer:fullerene hybrids on the photovoltaic performance , 2011 .

[5]  Valentin D. Mihailetchi,et al.  Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells , 2006 .

[6]  Mikkel Jørgensen,et al.  Upscaling of polymer solar cell fabrication using full roll-to-roll processing. , 2010, Nanoscale.

[7]  J. Grey,et al.  Resonance chemical imaging of polythiophene/fullerene photovoltaic thin films: mapping morphology-dependent aggregated and unaggregated C=C Species. , 2009, Journal of the American Chemical Society.

[8]  Chun-Wei Chen,et al.  Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing , 2008 .

[9]  N. S. Sariciftci,et al.  Conjugated polymer-based organic solar cells. , 2007, Chemical reviews.

[10]  W. Su,et al.  Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy , 2009 .

[11]  A. Hexemer,et al.  Polymer Crystallization of Partially Miscible Polythiophene/Fullerene Mixtures Controls Morphology , 2011 .

[12]  Roar R. Søndergaard,et al.  Advanced materials and processes for polymer solar cell devices , 2010 .

[13]  Gang Li,et al.  Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene) , 2005 .

[14]  M. Toney,et al.  In situ measurement of power conversion efficiency and molecular ordering during thermal annealing in P3HT:PCBM bulk heterojunction solar cells , 2011 .

[15]  D. Bradley,et al.  The nature of in-plane skeleton Raman modes of P3HT and their correlation to the degree of molecular order in P3HT:PCBM blend thin films. , 2011, Journal of the American Chemical Society.

[16]  Temperature dependent characteristics of poly(3 hexylthiophene)-fullerene based heterojunction organic solar cells , 2003 .

[17]  Tracey M. Clarke,et al.  Understanding the Influence of Morphology on Poly(3-hexylselenothiophene):PCBM Solar Cells , 2010 .

[18]  Dong Yun Lee,et al.  Poly(3‐hexylthiophene) Nanorods with Aligned Chain Orientation for Organic Photovoltaics , 2010 .

[19]  D. Bradley,et al.  Real‐Time Investigation of Crystallization and Phase‐Segregation Dynamics in P3HT:PCBM Solar Cells During Thermal Annealing , 2011 .

[20]  Christoph J. Brabec,et al.  Organic Photovoltaics: Materials, Device Physics, and Manufacturing Technologies , 2014 .

[21]  G. Namkoong,et al.  Investigation of structural, optical, and electrical properties of regioregular poly(3-hexylthiophene)/fullerene blend nanocomposites for organic solar cells , 2010 .

[22]  Tao Wang,et al.  Rationalizing Phase Transitions with Thermal Annealing Temperatures for P3HT:PCBM Organic Photovoltaic Devices , 2012 .

[23]  Jenny Nelson,et al.  Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends. , 2008, Nature materials.

[24]  Xiaoniu Yang,et al.  Nanoscale morphology of high-performance polymer solar cells. , 2005, Nano letters.

[25]  Christoph J. Brabec,et al.  Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime , 2008 .

[26]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[27]  M. Gordon,et al.  Raman and low temperature photoluminescence spectroscopy of polymer disorder in bulk heterojunction solar cell films , 2012 .

[28]  Fujun Zhang,et al.  Influence of PC60BM or PC70BM as electron acceptor on the performance of polymer solar cells , 2012 .

[29]  Gang Li,et al.  “Solvent Annealing” Effect in Polymer Solar Cells Based on Poly(3‐hexylthiophene) and Methanofullerenes , 2007 .

[30]  In situ monitoring of photovoltaic properties in organic solar cells during thermal annealing , 2012 .

[31]  Vishal Shrotriya,et al.  Absorption spectra modification in poly(3-hexylthiophene):methanofullerene blend thin films , 2005 .

[32]  Dieter Meissner,et al.  Nanoscale Morphology of Conjugated Polymer/Fullerene‐Based Bulk‐ Heterojunction Solar Cells , 2004 .

[33]  Garry Rumbles,et al.  Optimal negative electrodes for poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices , 2008 .

[34]  Vladimir Dyakonov,et al.  Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites , 2004 .

[35]  C. Sentein,et al.  In situ energy dispersive x-ray reflectometry measurements on organic solar cells upon working , 2005 .

[36]  M. Mackay,et al.  Nanoparticle concentration profile in polymer-based solar cells , 2010 .

[37]  M. Tuomikoski,et al.  Thickness dependence and solution-degradation effect in poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester based solar cells , 2010 .

[38]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[39]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .