Bi-Directional Evolutionary Topology Optimization Using Element Replaceable Method

In the present paper, design problems of maximizing the structural stiffness or natural frequency are considered subject to the material volume constraint. A new element replaceable method (ERPM) is proposed for evolutionary topology optimization of structures. Compared with existing versions of evolutionary structural optimization methods, contributions are twofold. On the one hand, a new automatic element deletion/growth procedure is established. The deletion of a finite element means that a solid element is replaced with an orthotropic cellular microstructure (OCM) element. The growth of an element means that an OCM element is replaced with a solid element of full materials. In fact, both operations are interchangeable depending upon how the value of element sensitivity is with respect to the objective function. The OCM design strategy is beneficial in preventing artificial modes for dynamic problems. Besides, the iteration validity is greatly improved with the introduction of a check position (CP) technique. On the other hand, a new checkerboard control algorithm is proposed to work together with the above procedure. After the identification of local checkerboards and detailed structures over the entire design domain, the algorithm will fill or delete elements depending upon the prescribed threshold of sensitivity values. Numerical results show that the ERPM is efficient and a clear and valuable material pattern can be achieved for both static and dynamic problems.

[1]  Grant P. Steven,et al.  A simple approach to structural frequency optimization , 1994 .

[2]  Grant P. Steven,et al.  Evolutionary structural optimization for dynamic problems , 1996 .

[3]  Y. Xie,et al.  An improved method for evolutionary structural optimisation against buckling , 2001 .

[4]  Yi Min Xie,et al.  Evolutionary Structural Optimization , 1997 .

[5]  Y. Xie,et al.  Improving efficiency of evolutionary structural optimization by implementing fixed grid mesh , 2002 .

[6]  Grant P. Steven,et al.  Optimal design of multiple load case structures using an evolutionary procedure , 1994 .

[7]  Y. Xie,et al.  Bidirectional Evolutionary Method for Stiffness Optimization , 1999 .

[8]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[9]  Pierre Duysinx,et al.  Dual approach using a variant perimeter constraint and efficient sub-iteration scheme for topology optimization , 2003 .

[10]  George I. N. Rozvany,et al.  On the validity of ESO type methods in topology optimization , 2001 .

[11]  G. Rozvany.  Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics , 2001 .

[12]  E. Hinton,et al.  Fully stressed topological design of structures using an evolutionary procedure , 1995 .

[13]  G. Rozvany.  Stress ratio and compliance based methods in topology optimization – a critical review , 2001 .

[14]  C. S. Jog,et al.  A new approach to variable-topology shape design using a constraint on perimeter , 1996 .

[15]  Y. Xie,et al.  Evolutionary structural optimization for problems with stiffness constraints , 1996 .

[16]  Pasi Tanskanen,et al.  The evolutionary structural optimization method: theoretical aspects , 2002 .

[17]  Qiu Ke-peng.  Investigation of Localized Modes in Topology Optimization of Dynamic Structures , 2006 .

[18]  H. Rodrigues,et al.  A material based model for topology optimization of thermoelastic structures , 1995 .

[19]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[20]  M. M. Neves,et al.  Generalized topology design of structures with a buckling load criterion , 1995 .

[21]  N. L. Pedersen.  Maximization of eigenvalues using topology optimization , 2000 .

[22]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[23]  Ole Sigmund,et al.  A 99 line topology optimization code written in Matlab , 2001 .

[24]  M. Zhou,et al.  The COC algorithm, Part II: Topological, geometrical and generalized shape optimization , 1991 .

[25]  J. Petersson,et al.  Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima , 1998 .

[26]  Jinglin Yang,et al.  MATHEMATICAL MODEL FOR RELAXATION IN HIGH-STRENGTH BOLTED CONNECTIONS , 1999 .

[27]  Y. Xie,et al.  Computational efficiency and validation of bi-directional evolutionary structural optimisation , 2000 .

[28]  G. Allaire,et al.  Topology optimization for minimum stress design with the homogenization method , 2004 .

[29]  Y. Xie,et al.  Perimeter control in the bidirectional evolutionary optimization method , 2002 .

[30]  C. S. Jog,et al.  Stability of finite element models for distributed-parameter optimization and topology design , 1996 .

[31]  Grant P. Steven,et al.  Topology Optimization for Frequencies Using an Evolutionary Method , 1999 .

[32]  Claus Mattheck,et al.  Design in Nature: Learning from Trees , 1998 .