Finite-element analysis of diamond turning of aluminium matrix composites
暂无分享,去创建一个
Chi Fai Cheung | Wing Bun Lee | Keith C. C. Chan | M. V. Ramesh | C. Cheung | W. Lee | K. Chan | M. Ramesh
[1] K. Chan,et al. A PARAMETRIC ANALYSIS OF CUTTING FORCES IN SINGLE-POINT DIAMOND TURNING OF Al6061/SiCp METAL MATRIX COMPOSITES (MMCs) , 2001 .
[2] C. Cheung,et al. A Parametric Analysis of Surface Quality in Diamond Turning of an Al6061/SiCp Metal Matrix Composite , 2000 .
[3] Liangchi Zhang,et al. SIMULATION OF ORTHOGONAL CUTTING: THE EFFECT OF SEPARATION CRITERIA AND CUTTING TOOL GEOMETRY , 1999 .
[4] Liangchi Zhang,et al. On the separation criteria in the simulation of orthogonal metal cutting using the finite element method , 1999 .
[5] N. Ganesan,et al. Analysis of machining of FRPs using FEM , 1998 .
[6] M. Ramulu,et al. Orthogonal cutting of fiber-reinforced composites: A finite element analysis , 1997 .
[7] A. Bagchi,et al. Finite Element Simulation of Chip Formation and Comparison with Machining Experiment , 1994 .
[8] S. Lin,et al. A Coupled Finite Element Model of Thermo-Elastic-Plastic Large Deformation for Orthogonal Cutting , 1992 .
[9] J. Strenkowski,et al. A Finite Element Model of Orthogonal Metal Cutting , 1985 .
[10] K. Osakada,et al. Process Modeling of Orthogonal Cutting by the Rigid-Plastic Finite Element Method , 1984 .
[11] Zhaowei Zhong,et al. Ductile-regime machining of particle-reinforced metal matrix composites , 1999 .
[12] D. Bhattacharyya,et al. Chip formation in the machining of SiC-particle-reinforced aluminium-matrix composites , 1998 .
[13] Liangchi Zhang,et al. Single-point scratching of 6061 Al alloy reinforced by different ceramic particles , 1994 .
[14] Zone-Ching Lin,et al. Effect of thermal load and mechanical load on the residual stress of a machined workpiece , 1991 .
[15] Jin-hua Zhang. Theory and technique of precision cutting , 1990 .
[16] John S. Strenkowski,et al. Finite element models of orthogonal cutting with application to single point diamond turning , 1988 .