Topologieoptimierung von Bauteilen in dynamischen und geregelten Systemen. Topology optimization of parts in dynamic and controlled systems

In der vorliegenden Arbeit wird ein neuer Prozess zur Optimierung von mechanischen Bauteilen in dynamischen und geregelten Systemen vorgestellt. Hierzu werden die Finite Elemente Methode, die Simulation von Mehrkorpersystemen und Regelungssystemen sowie die Topologieoptimierung genutzt. Durch die Integration dieser unterschiedlichen Analysemethoden konnen die Wechselwirkungen zwischen Bauteil, System und Regelung aktiv bei der Bauteilgestaltung einbezogen werden.

[1]  R. Brayton,et al.  A new efficient algorithm for solving differential-algebraic systems using implicit backward differentiation formulas , 1972 .

[2]  Albert Albers,et al.  Automated coupling of MDI/ADAMS and MSC.CONSTRUCT for the topology and shape optimization of flexible mechanical systems , 1999 .

[3]  Surya N. Patnaik,et al.  Optimality of a fully stressed design , 1998 .

[4]  Albert Albers,et al.  Integration der Simulation in die Produktentwicklung - Neue Möglichkeiten zur Steigerung der Qualität und Effizienz in der Produktentwicklung , 2003 .

[5]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[6]  Rudolf Koller.  Konstruktionsmethode für den Maschinen-, Geräte- und Apparatebau , 1976 .

[7]  Albert Albers,et al.  Topology Optimization in controlled dynamic systems , 2007 .

[8]  M. Ostojic.  Recursive control of robotic motion , 1996 .

[9]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[10]  Pauli Pedersen,et al.  Optimal Orientation of Anisotropic Materials Optimal Distribution of Anisotropic Materials Optimal Shape Design with Anisotropic Materials Optimal Design for a Class of Non-Linear Elasticity , 1993 .

[11]  Zafer Gürdal,et al.  Combined topology and fiber path design of composite layers using cellular automata , 2005 .

[12]  Albert Albers,et al.  Automated structural optimization of flexible components using MSC.ADAMS/Flex and MSC.Nastran Sol200 , 2002 .

[13]  Hiroaki Hoshino,et al.  Structural Optimization in Multibody Dynamics System With FEM Model on Engine Components , 2007 .

[14]  Norman S. Nise,et al.  Control Systems Engineering , 1991 .

[15]  Wolfgang Seemann,et al.  Kinematic analysis of human pointing gestures , 2008 .

[16]  William Prager,et al.  Optimal design of multi-purpose structures* , 1968 .

[17]  Hyun K. Kim,et al.  Biped humanoid robot Mahru III , 2007, 2007 7th IEEE-RAS International Conference on Humanoid Robots.

[18]  Gyung-Jin Park,et al.  Optimization of a structure with contact conditions using equivalent loads , 2008 .

[19]  H. Neuber.  Kerbspannungslehre : Grundlagen für genaue Festigkeitsberechnung mit Berücksichtigung von Konstruktionsform und Werkstoff , 1958 .

[20]  D. Sorensen,et al.  Approximation of large-scale dynamical systems: an overview , 2004 .

[21]  Wolfgang Seemann,et al.  A Kinematic Study of Human Torso Motion , 2007 .

[22]  William Prager,et al.  Problems of Optimal Structural Design , 1968 .

[23]  Vladimir Hubka,et al.  Theorie Technischer Systeme , 1984 .

[24]  J. G. Ziegler,et al.  Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.

[25]  Werner Schiehlen,et al.  Modular Simulation in Multibody System Dynamics , 2000 .

[26]  Michael Valášek,et al.  Overview of Coupling of Multibody and Control Engineering Tools , 2004 .

[27]  Uri Kirsch,et al.  Structural Optimization: Fundamentals and Applications , 1993 .

[28]  Albert Albers,et al.  Experience with the new education model "Integrated Product Development" at the University of Karlsruhe , 1998 .

[29]  Albert Albers,et al.  Virtual Prototyping: Formoptimierung dynamisch beanspruchter Bauteile auf Betriebsfestigkeit , 2003 .

[30]  Andrzej Osyczka,et al.  Multicriteria Design Optimization: Procedures and Applications , 1990 .

[31]  Karlheinz Roth,et al.  Konstruieren Mit Konstruktionskatalogen , 1994 .

[32]  Peter C. Breedveld,et al.  Modelling of physical systems for the design and control of mechatronic systems , 2003, Annu. Rev. Control..

[33]  P. Häußler,et al.  Simulation mechatronischer Systeme an Hand geregelter hybrider Mehrkörpersysteme , 2007 .

[34]  Ing Peter Häse,et al.  Investigation of Drive Systems Using ADAMS and MATLAB / SIMULINK , 2000 .

[35]  George I. N. Rozvany,et al.  Analytical benchmarks in topology optimization - including probabilistic design , 2008 .

[36]  C. W. Gear,et al.  Automatic integration of Euler-Lagrange equations with constraints , 1985 .

[37]  Albert Albers,et al.  Design Patterns in Microtechnology , 2009 .

[38]  John McPhee,et al.  Dynamics of mountain bicycles with rear suspensions: design optimization , 2000 .

[39]  K. Hiramoto,et al.  Integrated Design of Structural and Control Systems Based on a Polynomial Matrix Approach: A Unified Framework for Structural and/or Control Design , 2007 .

[40]  O. Vaculin,et al.  Multi-Disciplinary Simulation of Vehicle System Dynamics , 2003 .

[41]  W. Ritz.  Über eine neue Methode zur Lösung gewisser Variationsprobleme der mathematischen Physik. , 1909 .

[42]  Albert Albers,et al.  Principles for design on the abstract level of the contact and channel model C&CM , 2004 .

[43]  M. Ohmer.  A new approach for the engineering thinking process , 2004 .

[44]  Albert Albers,et al.  Selection and influence of load cases for the topology optimization of the component structure of parallel kinematic machines , 2006 .

[45]  Friedrich Pfeiffer,et al.  Leg Design for a Humanoid Walking Robot , 2006, 2006 6th IEEE-RAS International Conference on Humanoid Robots.

[46]  J. Minx,et al.  Topology and Controller Parameter Optimization in Dynamic Mechatronic Systems , 2008 .

[47]  Markus Ledermann,et al.  Beiträge zur Optimierung von Faserverbunden nach dem Vorbild der Natur , 2003 .

[48]  Linda R. Petzold,et al.  Numerical solution of initial-value problems in differential-algebraic equations , 1996, Classics in applied mathematics.

[49]  Numerical approach to nonlinear control design , 1996 .

[50]  Martin Spieck,et al.  Coupling of Multibody and Control Simulation Tools for the Desgin of Mechatronic Systems , 2001 .

[51]  Chin-Yin Chen,et al.  Integrated structure and controller design of machine tools , 2004, IEEE Conference on Robotics, Automation and Mechatronics, 2004..

[52]  Ole Sigmund,et al.  Systematic design of phononic band–gap materials and structures by topology optimization , 2003, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[53]  Christian Schyr.  Modellbasierte Methoden für die Validierungsphase im Produktentwicklungsprozess mechatronischer Systeme am Beispiel der Antriebsstrangentwicklung , 2006 .

[54]  H. Baier,et al.  Optimierung in der Strukturmechanik , 1994 .

[55]  Hans P. Geering.  Regelungstechnik : mathematische Grundlagen, Entwurfsmethoden, Beispiele , 1994 .

[56]  V. B. Venkayya,et al.  Optimization of Structures Based on the Study of Energy Distribution , 1968 .

[57]  Albert Albers,et al.  System based topology optimization as development tools for lightweight components in humanoid robots , 2008, Humanoids 2008 - 8th IEEE-RAS International Conference on Humanoid Robots.

[58]  Wolfgang Seemann,et al.  Recursive Control of a 7 dof Robotic Arm , 2008 .

[59]  A Albers,et al.  A new approach in product development, based on systems engineering and systematic problem solving , 2006 .

[60]  Albert Albers,et al.  Gezielte Problemlösung bei der Produktentwicklung mit Hilfe der SPALTEN-Methode , 2002 .

[61]  M. Zhou,et al.  Recent Developments in the Commercial Implementation of Topology Optimization , 2006 .

[62]  M. Bampton,et al.  Coupling of substructures for dynamic analyses. , 1968 .

[63]  John A. Nelder,et al.  A Simplex Method for Function Minimization , 1965, Comput. J..

[64]  Albert Albers,et al.  Multidisciplinary shape and topology optimization and its integration in the product development process for the effective development of competetive products , 1999 .

[65]  Albert Albers,et al.  Structural Optimization of Multiple Parts in Mechatronic Systems , 2008, SOCO 2008.

[66]  Albert Albers.  Simultaneous Engineering an einem Beispiel aus der Kraftfahrzeugzulieferindustrie , 1993 .

[67]  Albert Albers,et al.  The pair character of working surfaces - significant elements of the contact & channel model C&CM , 2004 .

[68]  Albert Albers,et al.  Upper Body of a new Humanoid Robot - the Design of ARMAR III , 2006, 2006 6th IEEE-RAS International Conference on Humanoid Robots.

[69]  Günther Stelzner,et al.  Zur Modellierung und Simulation biomechanischer Mehrkörpersysteme , 2008 .

[70]  Albert Albers,et al.  Structural Optimization of Components in Controlled Mechanical Systems , 2007 .

[71]  W. Seemann,et al.  Kinematik und Dynamik aus experimentell ermittelten Bewegungen , 2006 .

[72]  Dieter Bestle.  Analyse und Optimierung von Mehrkörpersystemen , 1994 .

[73]  P. Eberhard,et al.  Augmented Lagrangian Particle Swarm Optimization in Mechanism Design , 2007 .

[74]  Albert Albers,et al.  Konstruktionsmethodisches Grundmodell zum Zusammenhang von Gestalt und Funktion technischer Systeme - Das Elementmodell "Wirkflächenpaare & Leitstützstrukturen" zur Analyse und Synthese technischer Systeme , 2002 .

[75]  Wolf Krüger,et al.  DESIGN AND SIMULATION OF SEMI-ACTIVE LANDING GEARS FOR TRANSPORT AIRCRAFT* , 2002 .

[76]  Peter Eberhard,et al.  Improving the reduction process in flexible multibody dynamics by the use of 2nd order position Gramian matrices , 2011 .

[77]  G. Ropohl.  Allgemeine Technologie : Eine Systemtheorie der Technik , 2009 .

[78]  Albert Albers,et al.  System Simulation and Structural Optimization , 2008, SOCO 2008.

[79]  Martin P. Bendsøe,et al.  Topology and Boundary Shape Optimization as an Integrated Tool for Computer Aided Design , 1991 .

[80]  Jochen Oerding.  Ein Beitrag zum Modellverständnis der Produktentstehung - Strukturierung von Zielsystemen mittels C&CM , 2009 .

[81]  Albert Albers.  Simultaneous Engineering, Projektmanagement und Konstruktionsmethodik - Werkzeuge zur Effizienzsteigerung , 1994 .

[82]  John McPhee,et al.  Determination of Minimum-Time Maneuvers for a Robotic Manipulator Using Numerical Optimization Methods∗ , 1999 .

[83]  Albert Albers,et al.  Structural Optimization in Mechatronic Systems , 2008 .

[84]  Albert Albers,et al.  Model Based Verification of Automotive Powertrains , 2005 .

[85]  A. Albers,et al.  A New Approach for Optimization of Sheet Metal Components , 2005 .

[86]  P. Häußler,et al.  Structural and Controller Optimization in Dynamic Mechatronic Systems , 2010, SOCO 2009.