Original Topology of GaAs-PHEMT Mixer

An original topology of GaAs-PHEMT mixer is investigated under high conversion gain consideration. Mixer topology is based on "LO source-injection" concept, since RF, IF and LO signals are respectively applied on the gate, drain and source terminals of the mixing transistor. The conversion matrix formalism allows both the optimization of matching and filtering cells and the assessment of the nonlinear stability. For 14 to 12 GHz frequency conversion, the designed MMIC single balanced mixer exhibits a conversion gain of 5 dB at ¿15 dBm LO power for a total power consumption of 88 mW and chip size about 0.9 mm2. The other performances are an output IP3 of 7 dBm for ¿8 dBm LO Power and a NF of 7 dB.

[1]  Stephen A. Maas,et al.  Nonlinear microwave circuits , 1988 .

[2]  J. Laskar,et al.  GaAs MESFET dual-gate mixer with active filter design for Ku-band applications , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[3]  Kenichi Maruhashi,et al.  A monolithic AlGaAs/InGaAs upconverter IC for K-band wireless networks , 1995 .

[4]  Gunther Begemann,et al.  The Conversion Gain and Stability of MESFET Gate Mixers , 1979, 1979 9th European Microwave Conference.

[5]  J. Laskar,et al.  GaAs MESFET dual-gate mixer with active filter design for Ku-band applications , 1999, 1999 IEEE Radio Frequency Integrated Circuits Symposium (Cat No.99CH37001).

[6]  Jean-Louis Cazaux,et al.  Experience and propective of MMIC's for space programes , 1998 .

[7]  R. Stahlmann,et al.  Dual-Gate MESFET Mixers , 1984 .

[8]  H. W. Bode,et al.  Network analysis and feedback amplifier design , 1945 .