Calculation of pure distortional elastic buckling loads of members subjected to compression via the finite element method

An analysis procedure is presented which allows to calculate pure distortional elastic buckling loads by means of the finite element method (FEM). The calculation is carried out using finite element models constrained according to uncoupled buckling deformation modes. The procedure consists of two steps: the first one is a generalised beam theory (GBT) analysis of the member cross-section, from which the constraints to apply to the finite element model are deduced; in the second step, a linear buckling analysis of the constrained FEM model is performed to determine the pure distortional loads. The proposed procedure is applied to thin-walled members with open cross-section, similar to those produced by cold-forming. The distortional loads obtained are rather accurate. They are in agreement with the loads given by GBT and the constrained finite strip method (cFSM).

[1]  J. M. Davies,et al.  First-order generalised beam theory , 1994 .

[2]  Teoman Peköz,et al.  Distortional Buckling of Thin-Walled Beams/Panels. I: Theory , 1995 .

[3]  Gregory J. Hancock,et al.  Computer analysis of thin-walled structural members , 1995 .

[4]  Gregory J. Hancock.  LOCAL DISTORTIONAL AND LATERAL BUCKLING OF I-BEAMS , 1978 .

[5]  Sándor Ádány,et al.  BUCKLING MODE CLASSIFICATION OF MEMBERS WITH OPEN THIN-WALLED CROSS- SECTIONS BY USING THE FINITE STRIP METHOD , 2004 .

[6]  J. M. Davies,et al.  Second-order generalised beam theory , 1994 .

[7]  Benjamin W. Schafer,et al.  Buckling mode decomposition of single-branched open cross-section members via finite strip method : Derivation , 2006 .

[8]  T. P. Desmond,et al.  Edge Stiffeners for Thin-Walled Members , 1981 .

[9]  R. Schardt.  Verallgemeinerte Technische Biegetheorie , 1989 .

[10]  Gregory J. Hancock,et al.  Distortional Buckling Formulas for Channel Columns , 1987 .

[11]  Dinar Camotim,et al.  Distortional buckling formulae for cold-formed steel C- and Z-section members: Part II—Validation and application , 2004 .

[12]  R. Schardt.  Generalized beam theory—an adequate method for coupled stability problems , 1994 .

[13]  Pentti Mäkeläinen,et al.  Design of Gypsum Sheathed Perforated Steel Wall Studs , 1998 .

[14]  Bao Guangjian,et al.  The design and on-site construction of shenzhen 384 m high level emperor skyscraper in China , 1998 .

[15]  Richard Schardt.  Lateral torsional and distortional buckling of channel- and hat-sections , 1994 .

[16]  Benjamin W. Schafer,et al.  Local, Distortional, and Euler Buckling of Thin-Walled Columns , 2002 .

[17]  Srinivasan Sridharan.  A semi-analytical method for the post-local-torsional buckling analysis of prismatic plate structures , 1982 .

[18]  R. J. Plank,et al.  Buckling under combined loading of thin, flat‐walled structures by a complex finite strip method , 1974 .

[19]  Dinar Camotim,et al.  Second-order generalised beam theory for arbitrary orthotropic materials , 2002 .

[20]  Dinar Camotim,et al.  Distortional buckling formulae for cold-formed steel C and Z-section members: Part I—derivation , 2004 .

[21]  Benjamin W. Schafer,et al.  Buckling mode decomposition of single-branched open cross-section members via finite strip method: Application and examples , 2006 .