Case study of failure of long prestressed precast concrete girder during lifting

Improvements in concrete technology, reinforcing systems and manufacturing enable the use of longer reinforced precast concrete girders, contributing to the competitiveness of this solution for bridge decks. The weight of the girders should be limited in order to achieve an optimum between span length, transportation costs and lifting costs. The current tendency in design is to minimize the width of the flanges of the girder. This makes the element more flexible to lateral deformation and increases the risk of lateral instability in temporary situations without lateral supports. This is reflected in an increment of the number of accidents and damages associated with such phenomenon. The main objective of this study is to describe a real case study of lateral instability of a 46?m long prestressed concrete girder during lifting operations as well as to perform a parametric study to understand the limits of the problem observed. In addition to presenting the case study, simplified formulations and numerical simulations are used to assess the safety margins against lateral instability. Special attention is paid to the evaluation of the provisions gathered in codes and guidelines regarding the lateral stability since they might not cover extreme cases.

[1]  Tim Stratford,et al.  Stability design of long precast concrete beams , 1999 .

[2]  Jong-Han Lee,et al.  Behavior of precast prestressed concrete bridge girders involving thermal effects and initial imperfections during construction , 2012 .

[3]  Raymond H. Plaut,et al.  Analysis of Elastic, Doubly Symmetric, Horizontally Curved Beams during Lifting , 2013 .

[4]  Ilker Kalkan,et al.  Lateral torsional buckling of rectangular reinforced concrete beams. , 2011 .

[5]  J. Dario Aristizabal-Ochoa,et al.  Analysis of a Horizontally Curved Long-Span Beam on Two Nonlinear Elastic Supports , 2016 .

[6]  George Laszlo,et al.  Handling and Shipping of Long Span Bridge Beams , 1987 .

[7]  Robert F. Mast.  LATERAL STABILITY OF LONG PRESTRESSED CONCRETE BEAMS - PART 2 , 1993 .

[8]  Tim Stratford,et al.  Lateral instability of long-span prestressed concrete beams on flexible bearings , 2001 .

[9]  Jonathan B. Hurff.  Stability of precast prestressed concrete bridge girders considering imperfections and thermal effects , 2010 .

[10]  Raymond H. Plaut,et al.  Stability of unbraced concrete beams on bearing pads including wind loading , 2014 .

[11]  Climent Molins,et al.  Numerical model for the analysis up to failure of precast concrete sections , 2012 .

[12]  Robert F. Mast.  LATERAL BENDING TEST TO DESTRUCTION OF A 149 FT PRESTRESSED CONCRETE I-BEAM , 1994 .

[13]  Antoni Cladera,et al.  Collapse of a precast concrete beam for a light roof: importance of elastomeric bearing pads in the element’s stability , 2014 .

[14]  Tim Stratford,et al.  LATERAL STABILITY OF LONG PRECAST CONCRETE BEAMS. , 1999 .

[15]  Reid W Castrodale,et al.  EXTENDING SPAN RANGES OF PRECAST PRESTRESSED CONCRETE GIRDERS , 2004 .

[16]  Fritz Leonhardt.  Spannbeton für die Praxis , 1955 .

[17]  Lawrence F. Kahn,et al.  Rollover stability of precast, prestressed concrete bridge girders with flexible bearings , 2012 .

[18]  Robert F. Mast.  Lateral Stability of Long Prestressed Concrete Beams Part 1 , 1989 .

[19]  Tim Stratford,et al.  The toppling of hanging beams , 2000 .

[20]  Jean Muller,et al.  Lateral Stability of Precast Members During Handling and Placing , 1962 .