Heat transfer analysis of a volumetric solar receiver by coupling the solar radiation transport and internal heat transfer

Abstract Volumetric receivers have become a promising technology for the solar thermal conversion. The absorption of concentrated solar radiation and the heat transfer to the working fluid are the two dominant processes. To effectively investigate the thermal performance of receiver, a numerical model coupling the solar radiation transport and the internal heat transfer is presented. Solar radiation transport from the dish concentrator to the interior of receiver is simulated with the Monte Carlo ray tracing method. Combining the distribution of absorbed solar energy in the receiver, the local thermal non-equilibrium model with P1 approximation is used to solve the internal heat transfer. Two other treatment approaches for the concentrated solar radiation are compared. One considers the solar radiation on the front surface of receiver as thermal boundary condition (TBC) and the other as a collimated incident radiation (CIR) beam. The results show that the porosity and mean cell size have a great effect on the distribution of absorbed solar radiation. Compared with the coupling approach, the TBC approach overestimates the solid temperature near the front surface with a deviation up to 76.4%, while the CIR approach provides acceptable temperature field with a deviation less than 3.4%. In addition, the fluid and solid temperatures both decrease as the slope error of concentrator increases.

[1]  Cyril Caliot,et al.  Heat transfer simulation in a thermochemical solar reactor based on a volumetric porous receiver , 2011 .

[2]  Yong Shuai,et al.  Numerical analysis of hydrogen production via methane steam reforming in porous media solar thermochemical reactor using concentrated solar irradiation as heat source , 2014 .

[3]  Jean-François Cornet,et al.  Monte Carlo advances and concentrated solar applications , 2014 .

[4]  Hiroshi Hasuike,et al.  Study on design of molten salt solar receivers for beam-down solar concentrator , 2006 .

[5]  Chang Xu,et al.  Numerical investigation on porous media heat transfer in a solar tower receiver , 2011 .

[6]  X. Xia,et al.  Thermal performance analysis on a volumetric solar receiver with double-layer ceramic foam , 2015 .

[7]  M. Modest.  Radiative heat transfer , 1993 .

[8]  Eduardo Zarza,et al.  Modelling and testing of a solar-receiver system applied to high-temperature processes , 2015 .

[9]  William M. Harris,et al.  Monte Carlo determination of radiative properties of metal foams: Comparison between idealized and real cell structures , 2015 .

[10]  G. Flamant,et al.  Numerical simulation of convective heat transfer between air flow and ceramic foams to optimise volumetric solar air receiver performances , 2011 .

[11]  Thomas Fend,et al.  High Porosity materials as volumetric receivers for solar energetics , 2010 .

[12]  Antonio L. Avila-Marin,et al.  Volumetric receivers in Solar Thermal Power Plants with Central Receiver System technology: A review , 2011 .

[13]  Abraham Kribus,et al.  The promise and challenge of solar volumetric absorbers , 2014 .

[14]  Xin-Lin Xia,et al.  Transmission performances of solar windows exposed to concentrated sunlight , 2014 .

[15]  G. Flamant,et al.  Coupled radiation and flow modeling in ceramic foam volumetric solar air receivers , 2011 .

[16]  Qianjun Mao,et al.  Heat transfer analyses of porous media receiver with multi-dish collector by coupling MCRT and FVM method , 2013 .

[17]  K. Vafai,et al.  Analysis of Radiative Effect under Local Thermal Non-Equilibrium Conditions in Porous Media-Application to a Solar Air Receiver , 2014 .

[18]  X. Xia,et al.  Integrated analysis on the volumetric absorption characteristics and optical performance for a porous media receiver , 2015 .

[19]  Chuang Sun,et al.  Numerical investigation of the solar concentrating characteristics of 3D CPC and CPC-DC , 2011 .

[20]  Ya-Ling He,et al.  Numerical investigations on coupled heat transfer and synthetical performance of a pressurized volumetric receiver with MCRT–FVM method , 2013 .

[21]  K. Vafai.  Handbook of porous media , 2015 .

[22]  Fuqiang Wang,et al.  Heat transfer analysis of porous media receiver with different transport and thermophysical models using mixture as feeding gas , 2014 .

[23]  A. Kribus,et al.  Parametric Study of Volumetric Absorber Performance , 2014 .

[24]  L. R. Glicksman,et al.  A Basic Study of Heat Transfer Through Foam Insulation , 1984 .

[25]  Christopher Dey,et al.  The effective size of the solar cone for solar concentrating systems , 2003 .

[26]  Ya-Ling He,et al.  A new modelling method and unified code with MCRT for concentrating solar collectors and its applications , 2013 .

[27]  A. Steinfeld,et al.  Heat Transfer Analysis of a Novel Pressurized Air Receiver for Concentrated Solar Power via Combined Cycles , 2009 .

[28]  K. Kamiuto,et al.  Radiation Emission Characteristics of an Open-Cellular Porous Burner , 2009 .

[29]  Hyun-jin Lee,et al.  Consistent heat transfer analysis for performance evaluation of multichannel solar absorbers , 2012 .

[30]  Wang Fuqiang,et al.  Thermal performance analysis of porous medium solar receiver with quartz window to minimize heat flux gradient , 2014 .

[31]  Hyun-jin Lee,et al.  The geometric-optics relation between surface slope error and reflected ray error in solar concentrators , 2014 .

[32]  G. Johnston.  Focal region measurements of the 20 m2 tiled dish at the Australian National University , 1998 .