Impact of Inductors Saturation on DC-DC Switching Regulators

This paper discusses the impact of ferrite inductors saturation on the performances of DC-DC switching regulators. This analysis demystifies some misconceptions about the influence of inductor saturation on power converters performances. Case studies and examples presented in this paper show that inductor saturation can be tolerated by switching regulators, depending on topology, semiconductor power components and control. Moreover, under certain conditions, the performances of DC-DC regulators with small saturating inductors are comparable to those ones obtained with large non-saturated inductors.

[1]  Nicola Femia,et al.  Switching Power Supplies with Ferrite Inductors in Sustainable Saturation Operation , 2017 .

[2]  Daniel Kuebrich,et al.  Prediction of the non-linear behavior of a stepped air gap inductor , 2016, 2016 IEEE 17th Workshop on Control and Modeling for Power Electronics (COMPEL).

[3]  Sergio Callegari,et al.  On the Benefit of Adopting Saturable Inductors in Switching-Mode Power-Supplies: A Case Study , 2018, 2018 IEEE International Symposium on Circuits and Systems (ISCAS).

[4]  Nicola Femia,et al.  A Novel AC Power Loss Model for Ferrite Power Inductors , 2019, IEEE Transactions on Power Electronics.

[5]  Nicola Femia,et al.  A Power-Loss-Dependent Inductance Model for Ferrite-Core Power Inductors in Switch-Mode Power Supplies , 2019, IEEE Transactions on Circuits and Systems I: Regular Papers.

[6]  Ju Hyung Kim,et al.  Nonlinear analytical model of an inductance considering saturation and temperature variation , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[7]  Nicola Femia,et al.  A Pulse Compression procedure for power inductors modeling up to moderate non-linearity , 2019, Integr..

[8]  Nicola Femia,et al.  Optimizing power converters with partially saturated inductors by evolutionary algorithms , 2017, 2017 14th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD).

[9]  Gabriel A. Rincon-Mora,et al.  Small saturating inductors for more compact switching power supplies , 2012 .

[10]  E.F.W. Alexanderson,et al.  A Magnetic Amplifier for Radio Telephony , 1916, Proceedings of the Institute of Radio Engineers.

[11]  Nicola Femia,et al.  A Novel Method to Predict the Real Operation of Ferrite Inductors With Moderate Saturation in Switching Power Supply Applications , 2016, IEEE Transactions on Power Electronics.

[12]  J. Brown,et al.  Modeling the switching performance of a MOSFET in the high side of a non-isolated buck converter , 2006, IEEE Transactions on Power Electronics.

[13]  D. Scire,et al.  A Temperature Dependent Non-Linear Inductor Model for a DC/DC Boost Converter , 2018, 2018 15th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD).

[14]  T. G. Wilson,et al.  The evolution of power electronics , 1992, Proceedings of the IEEE International Symposium on Industrial Electronics.

[15]  K. Nishijima,et al.  Hysteretic PWM control method for all types of DC-to-DC converters , 2007, INTELEC 07 - 29th International Telecommunications Energy Conference.