Pore level imaging of fluid transport using synchrotron X-ray microtomography

Recently developed high resolution computed microtomography (CMT) using synchrotron X-ray sources is analogous to conventional medical CT scanning and provides the ability to obtain three-dimensional images of specimens with a spatial resolution on the order of micrometers. Application of this technique to the study of core samples has previously been shown to provide excellent two- and three- dimensional high resolution descriptions of pore structure and mineral distributions of core material. Recently, computed microtomographic endpoint saturation images of a fluid filled sandstone core sample were obtained using a microtomographic apparatus and a high energy X-ray beam produced by a superconducting wiggler at the National Synchrotron Light Source at Brookhaven National Laboratory. Images of a 6 mm subsection of the one inch diameter core sample were obtained prior and subsequent to flooding to residual oil. Both oil and brine phases were observable within the imaged rock matrix. The rock matrix image data was used as input to a fluid transport simulator and the results compared with the end point saturation images and data. These high resolution images of the fluid filled pore space have not been previously available to researchers and will provide valuable insight to fluid flow, and provide data as input into and validation of high resolution porous media flow simulators, such as percolation-network and lattice Boltzmann models.

[1]  P. Spanne,et al.  Measurement of imperfections in thermal spray coatings using synchrotron-computed microtomography , 1993 .

[2]  Daniel H. Rothman,et al.  Lattice‐Boltzmann studies of immiscible two‐phase flow through porous media , 1993 .

[3]  Mark L. Rivers,et al.  Computerized microtomography using synchrotron radiation from the NSLS , 1986 .

[4]  Shiyi Chen,et al.  A lattice Boltzmann model for multiphase fluid flows , 1993, comp-gas/9303001.

[5]  Gabor T. Herman,et al.  Image Reconstruction From Projections , 1975, Real Time Imaging.

[6]  P. Spanne,et al.  USE OF X-RAY MICROSCOPY AND SYNCHROTRON MICROTOMOGRAPHY TO CHARACTERIZE POLYETHYLENE POLYMERIZATION PARTICLES , 1990 .

[7]  W. E. Soll,et al.  Developments in Synchrotron X-Ray Microtomography with Applications to Flow in Porous Media , 1996 .

[8]  S. Zaleski,et al.  Lattice Boltzmann model of immiscible fluids. , 1991, Physical review. A, Atomic, molecular, and optical physics.

[9]  Keith W. Jones,et al.  Synchrotron computed microtomography of porous media: Topology and transports. , 1994, Physical review letters.

[10]  Keith W. Jones,et al.  CATALYST ANALYSIS USING SYNCHROTRON X-RAY MICROSCOPY , 1991 .

[11]  W. E. Soll,et al.  Toward Improved Prediction of Reservoir Flow Performance , 1994 .

[12]  S. Zaleski,et al.  Lattice-gas models of phase separation: interfaces, phase transitions, and multiphase flow , 1994 .

[13]  P. Spanne,et al.  Computed microtomography of reservoir core samples , 1995 .

[14]  J. H. Dunsmuir,et al.  X-Ray Microtomography: A New Tool for the Characterization of Porous Media , 1991 .

[15]  Sauro Succi,et al.  a Review of the Lattice Boltzmann Method , 1993 .

[16]  S. Chen,et al.  Lattice methods and their applications to reacting systems , 1993, comp-gas/9312001.

[17]  B. Flannery,et al.  Three-Dimensional X-ray Microtomography , 1987, Science.

[18]  Shiyi Chen,et al.  Lattice Boltzmann computational fluid dynamics in three dimensions , 1992 .

[19]  Daniel H. Rothman,et al.  Lattice-Boltzmann simulations of flow through Fontainebleau sandstone , 1995 .

[20]  Synchrotron microtomography of supported catalysts , 1989 .

[21]  Randy D. Hazlett,et al.  Simulation of capillary-dominated displacements in microtomographic images of reservoir rocks , 1995 .