Estimating the Height and Basal Area at Individual Tree and Plot Levels in Canadian Subarctic Lichen Woodlands Using Stereo WorldView-3 Images

Lichen woodlands (LW) are sparse forests that cover extensive areas in remote subarctic regions where warming due to climate change is fastest. They are difficult to study in situ or with airborne remote sensing due to their remoteness. We have tested a method for measuring individual tree heights and predicting basal area at tree and plot levels using WorldView-3 stereo images. Manual stereo measurements of tree heights were performed on short trees (2–12 m) of a LW region of Canada with a residual standard error of ≈0.9 m compared to accurate field or UAV height data. The number of detected trees significantly underestimated field counts, especially in peatlands in which the visual contrast between trees and ground cover was low. The heights measured from the WorldView-3 images were used to predict the basal area at individual tree level and summed up at plot level. In the best conditions (high contrast between trees and ground cover), the relationship to field basal area had a R2 of 0.79. Accurate estimates of above ground biomass should therefore also be possible. This method could be used to calibrate an extensive remote sensing approach without in-situ measurements, e.g., by linking precise structural data to ICESAT-2 footprints.

[1]  S. Payette,et al.  Tamm review: The North-American lichen woodland , 2018 .

[2]  A. Beaudoin,et al.  A shadow fraction method for mapping biomass of northern boreal black spruce forests using QuickBird imagery , 2007 .

[3]  P. Gong,et al.  Detection of individual trees and estimation of tree height using LiDAR data , 2007, Journal of Forest Research.

[4]  Y. Hu,et al.  Mapping canopy height using a combination of digital stereo‐photogrammetry and lidar , 2008 .

[5]  Pascale Ropars,et al.  Shrub expansion at the forest–tundra ecotone: spatial heterogeneity linked to local topography , 2012 .

[6]  Amy L. Neuenschwander,et al.  Photon counting LiDAR: An adaptive ground and canopy height retrieval algorithm for ICESat-2 data , 2018 .

[7]  M. Fortin,et al.  The Subarctic Forest–Tundra: The Structure of a Biome in a Changing Climate , 2001 .

[8]  Taejung Kim,et al.  Quantitative Estimation and Validation of the Effects of the Convergence, Bisector Elevation, and Asymmetry Angles on the Positioning Accuracies of Satellite Stereo Pairs , 2016 .

[9]  Michael A. Wulder,et al.  Developing 5 m resolution canopy height and digital terrain models from WorldView and ArcticDEM data , 2018, Remote Sensing of Environment.

[10]  A. Rigling,et al.  20th century tree‐line advance and vegetation changes along an altitudinal transect in the Putorana Mountains, northern Siberia , 2012 .

[11]  J. Abshire,et al.  Geoscience Laser Altimeter System (GLAS) on the ICESat Mission: On‐orbit measurement performance , 2005 .

[12]  Nathan J. Heinert,et al.  Extending satellite remote sensing to local scales: land and water resource monitoring using high-resolution imagery , 2003 .

[13]  S. Spurr.  Photogrammetry and Photo-Interpretation , 1960 .

[14]  P. Treitz,et al.  Image classification of a northern peatland complex using spectral and plant community data , 2003 .

[15]  Erik Næsset,et al.  Detection and Segmentation of Small Trees in the Forest-Tundra Ecotone Using Airborne Laser Scanning , 2016, Remote. Sens..

[16]  Stefan W. Maier,et al.  Limitations of high resolution satellite stereo imagery for estimating canopy height in Australian tropical savannas , 2019, Int. J. Appl. Earth Obs. Geoinformation.

[17]  J. C. Ritchie,et al.  The Boreal Bioclimates , 1972 .

[18]  Cédric Véga,et al.  Measuring individual tree height using a combination of stereophotogrammetry and lidar , 2004 .

[19]  Guoqing Sun,et al.  The use of sun elevation angle for stereogrammetric boreal forest height in open canopies. , 2017, Remote sensing of environment.

[20]  Gustau Camps-Valls,et al.  Measuring the Spatial and Spectral Performance of WorldView-3 , 2015 .

[21]  I. Ozdemir,et al.  Estimating stem volume by tree crown area and tree shadow area extracted from pan‐sharpened Quickbird imagery in open Crimean juniper forests , 2008 .

[22]  A. Beaudoin,et al.  Forest attribute estimation of northeastern Canadian forests using QuickBird imagery and a shadow fraction method , 2012 .

[23]  Guoqing Sun,et al.  The Uncertainty of Plot-Scale Forest Height Estimates from Complementary Spaceborne Observations in the Taiga-Tundra Ecotone , 2014, Remote. Sens..

[24]  Guillermo Castilla,et al.  Measuring Vegetation Height in Linear Disturbances in the Boreal Forest with UAV Photogrammetry , 2017, Remote. Sens..

[25]  Markus Hollaus,et al.  Aboveground forest biomass derived using multiple dates of WorldView-2 stereo-imagery: quantifying the improvement in estimation accuracy , 2018, International Journal of Remote Sensing.

[26]  Terje Gobakken,et al.  Detection of small single trees in the forest–tundra ecotone using height values from airborne laser scanning , 2011 .

[27]  I. Korpela,et al.  Single-tree forest inventory using lidar and aerial images for 3D treetop positioning, species recognition, height and corwn width estimation , 2007 .

[28]  Annika Hofgaard,et al.  The dynamics of the tundra-taiga boundary: an overview and suggested coordinated and integrated approach to research. , 2002, Ambio.

[29]  Jonathan P. Dash,et al.  Comparison of high-density LiDAR and satellite photogrammetry for forest inventory , 2018, ISPRS Journal of Photogrammetry and Remote Sensing.

[30]  I. Korpela.  Individual tree measurements by means of digital aerial photogrammetry , 2004, Silva Fennica Monographs.

[31]  C. Atzberger,et al.  Use of WorldView-2 stereo imagery and National Forest Inventory data for wall-to-wall mapping of growing stock , 2016 .

[32]  Guoqing Sun,et al.  Combining satellite lidar, airborne lidar, and ground plots to estimate the amount and distribution of aboveground biomass in the boreal forest of North America1 , 2015 .

[33]  Kenneth J. Ranson,et al.  Object-based mapping of the circumpolar taiga–tundra ecotone with MODIS tree cover , 2011 .

[34]  Rongjun Qin,et al.  Quality assessment of digital surface models extracted from WorldView-2 and WorldView-3 stereo pairs over different land covers , 2019 .

[35]  N. Coops,et al.  Airborne lidar sampling of the Canadian boreal forest: Planning, execution & initial processing , 2011 .

[36]  C. Peng,et al.  Developing and Evaluating Tree Height-Diameter Models at Three Geographic Scales for Black Spruce in Ontario , 2004 .

[37]  Rongjun Qin,et al.  RPC STEREO PROCESSOR (RSP) – A SOFTWARE PACKAGE FOR DIGITAL SURFACE MODEL AND ORTHOPHOTO GENERATION FROM SATELLITE STEREO IMAGERY , 2016 .

[38]  Taejung Kim,et al.  Analysis of Dual-Sensor Stereo Geometry and Its Positioning Accuracy , 2014 .

[39]  Ian Joughin,et al.  An automated, open-source pipeline for mass production of digital elevation models (DEMs) from very-high-resolution commercial stereo satellite imagery , 2016 .

[40]  Yukihiro Chiba,et al.  Architectural analysis of relationship between biomass and basal area based on pipe model theory , 1998 .