Synergistic Na+ and F− co-doping modification strategy to improve the electrochemical performance of Li-rich Li1·20Mn0·54Ni0·13Co0·13O2 cathode

[1]  Zhen Wang,et al.  One-step preparation of homogeneous single crystal Li-rich cathode materials with encouraging electrochemical performance , 2020 .

[2]  F. Kang,et al.  A Simple Dual-Ion Doping Method to Stabilize Li-Rich Materials and Suppress Voltage Decay. , 2020, ACS applied materials & interfaces.

[3]  J. Xie,et al.  Spinel/layered heterostructured Li-rich Mn-based cathode material for high-capacity and high-rate Li-ion batteries , 2020, Journal of Materials Science: Materials in Electronics.

[4]  Gang Chen,et al.  Reduced Lithium/Nickel Disorder Degree of Sodium‐Doped Lithium‐Rich Layered Oxides for Cathode Materials: Experiments and Calculations , 2020 .

[5]  Jun Liu,et al.  Effect of Different Composition on Voltage Attenuation of Li-Rich Cathode Material for Lithium-Ion Batteries , 2019, Materials.

[6]  Yan Wang,et al.  Enhanced Electrochemical Performance of Lithium, Manganese-Rich Cathode for Li-ion Batteries with Na and F Co-Doping. , 2019, ACS applied materials & interfaces.

[7]  Chen Lihua,et al.  Probing and suppressing voltage fade of Li-rich Li1.2Ni0.13Co0.13Mn0.54O2 cathode material for lithium-ion battery , 2019, Electrochimica Acta.

[8]  Bao Li,et al.  Improving rate performances of Li-rich layered oxide by the co-doping of Sn and K ions , 2019, Journal of Materiomics.

[9]  Wenbo Song,et al.  Lithium-ion conductive coating layer on nickel rich layered oxide cathode material with improved electrochemical properties for Li-ion battery , 2019, Journal of Alloys and Compounds.

[10]  L. Mai,et al.  Double-shell Li-rich layered oxide hollow microspheres with sandwich-like carbon@spinel@layered@spinel@carbon shells as high-rate lithium ion battery cathode , 2019, Nano Energy.

[11]  C. Liang,et al.  A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries , 2019, Nano Energy.

[12]  K. Du,et al.  Enhanced electrochemical performance of layered Li-rich cathode materials for lithium ion batteries via aluminum and boron dual-doping , 2019, Ceramics International.

[13]  Wei Wang,et al.  Effects of raw materials on the electrochemical performance of Na-doped Li-rich cathode materials Li[Li0.2Ni0.2Mn0.6]O2 , 2019, Ionics.

[14]  Y. Huang,et al.  Improving Electrochemical Performances of Li-Rich Layered Mn-Based Oxide Cathodes through K2Cr2O7 Solution Treatment , 2019, ACS Applied Energy Materials.

[15]  Yong Wang,et al.  Suppressing Mn Reduction of Li-Rich Mn-Based Cathodes by F-Doping for Advanced Lithium-Ion Batteries , 2018, The Journal of Physical Chemistry C.

[16]  Li Liu,et al.  Synchronous Tailoring Surface Structure and Chemical Composition of Li‐Rich–Layered Oxide for High‐Energy Lithium‐Ion Batteries , 2018, Advanced Functional Materials.

[17]  Xueping Gao,et al.  Na-Doped LiNi0.8Co0.15Al0.05O2 with Excellent Stability of Both Capacity and Potential as Cathode Materials for Li-Ion Batteries , 2018, ACS Applied Energy Materials.

[18]  W. Gui,et al.  Improving rate capability and decelerating voltage decay of Li-rich layered oxide cathodes by chromium doping , 2018, International Journal of Hydrogen Energy.

[19]  Bao Zhang,et al.  Effect of Nb and F Co-doping on Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material for High-Performance Lithium-Ion Batteries , 2018, Front. Chem..

[20]  Xue Li,et al.  Synthesis of Spherical Fluorine Modified Gradient Li-Ion Battery Cathode Material LiNi0.80Co0.15Al0.05O2 by Simple Solid Phase Method , 2018 .

[21]  Yu Xie,et al.  Enhanced Rate Performance of Al-Doped Li-Rich Layered Cathode Material via Nucleation and Post-solvothermal Method , 2018 .

[22]  Chenghao Yang,et al.  Nanoscale gadolinium doped ceria (GDC) surface modification of Li-rich layered oxide as a high performance cathode material for lithium ion batteries , 2018 .

[23]  Qinghua Zhang,et al.  Improving the electrochemical performances of Li-rich Li 1.20 Ni 0.13 Co 0.13 Mn 0.54 O 2 through a cooperative doping of Na + and PO 4 3− with Na 3 PO 4 , 2018 .

[24]  Liyi Shi,et al.  Insights into the stable layered structure of a Li-rich cathode material for lithium-ion batteries , 2017 .

[25]  Jun Chen,et al.  Stable layered Ni-rich LiNi0.9Co0.07Al0.03O2 microspheres assembled with nanoparticles as high-performance cathode materials for lithium-ion batteries , 2017 .

[26]  Zhaoping Liu,et al.  Synthesis of Three-Dimensional Nanoporous Li-Rich Layered Cathode Oxides for High Volumetric and Power Energy Density Lithium-Ion Batteries. , 2017, ACS applied materials & interfaces.

[27]  Feng Wu,et al.  3D Reticular Li1.2Ni0.2Mn0.6O2 Cathode Material for Lithium-Ion Batteries. , 2017, ACS applied materials & interfaces.

[28]  Yuan Xue,et al.  Layered-spinel capped nanotube assembled 3D Li-rich hierarchitectures for high performance Li-ion battery cathodes , 2016 .

[29]  Tongchao Liu,et al.  Multishelled Ni‐Rich Li(NixCoyMnz)O2 Hollow Fibers with Low Cation Mixing as High‐Performance Cathode Materials for Li‐Ion Batteries , 2016, Advanced science.

[30]  D. Xie,et al.  Improved Cycling Stability of Cobalt-free Li-rich Oxides with a Stable Interface by Dual Doping , 2016 .

[31]  H. Wang,et al.  Effects of fluorine doping on structure, surface chemistry, and electrochemical performance of LiNi0.8Co0.15Al0.05O2 , 2015 .

[32]  Zhen-bo Wang,et al.  Investigation on performance of Li(Ni0.5Co0.2Mn0.3)1−xTixO2 cathode materials for lithium-ion battery , 2015 .

[33]  J. Yang,et al.  Retarded phase transition by fluorine doping in Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material , 2015 .

[34]  Jung Yoon Seo,et al.  The crystal structure and electrochemical performance of Li1.167Mn0.548Ni0.18Co0.105O2 composite cathodes doped and co-doped with Mg and F , 2015 .

[35]  Debasish Mohanty,et al.  Unraveling the Voltage-Fade Mechanism in High-Energy-Density Lithium-Ion Batteries: Origin of the Tetrahedral Cations for Spinel Conversion , 2014 .

[36]  Qi Li,et al.  K(+)-doped Li(1.2)Mn(0.54)Co(0.13)Ni(0.13)O2: a novel cathode material with an enhanced cycling stability for lithium-ion batteries. , 2014, ACS applied materials & interfaces.

[37]  A. Manthiram,et al.  Smart design of lithium-rich layered oxide cathode compositions with suppressed voltage decay , 2014 .

[38]  Yong Yang,et al.  Improved electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material by fluorine incorporation , 2013 .

[39]  Jiangfeng Qian,et al.  Enhanced high-rate capability and cycling stability of Na-stabilized layered Li1.2[Co0.13Ni0.13Mn0.54]O2 cathode material , 2013 .

[40]  Jaephil Cho,et al.  A new type of protective surface layer for high-capacity Ni-based cathode materials: nanoscaled surface pillaring layer. , 2013, Nano letters.

[41]  Jianming Zheng,et al.  Formation of the spinel phase in the layered composite cathode used in Li-ion batteries. , 2012, ACS nano.

[42]  J. Colin,et al.  Evolutions of Li1.2Mn0.61Ni0.18Mg0.01O2 during the Initial Charge/Discharge Cycle Studied by Advanced Electron Microscopy , 2012 .

[43]  Shinichi Komaba,et al.  Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo(1/3)Ni(1/3)Mn(1/3)O2. , 2011, Journal of the American Chemical Society.

[44]  N. Kosova,et al.  Mixed layered Ni–Mn–Co hydroxides: Crystal structure, electronic state of ions, and thermal decomposition , 2007 .

[45]  Jai Prakash,et al.  Improvement of Electrochemical Performances of Li [ Ni0.8Co0.1Mn0.1 ] O2 Cathode Materials by Fluorine Substitution , 2007 .

[46]  B. V. R. Chowdari,et al.  Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries , 2002 .

[47]  Gerbrand Ceder,et al.  Layered-to-Spinel Phase Transition in Li x MnO2 , 2001 .

[48]  P. Novák,et al.  Characterization of Layered Lithium Nickel Manganese Oxides Synthesized by a Novel Oxidative Coprecipitation Method and Their Electrochemical Performance as Lithium Insertion Electrode Materials , 1998 .

[49]  Yang-Kook Sun,et al.  Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives , 2016 .

[50]  Zhixing Wang,et al.  Synthesis and electrochemical study of Zr-doped Li[Li0.2Mn0.54Ni0.13Co0.13]O2 as cathode material for Li-ion battery , 2016 .

[51]  Xueping Gao,et al.  The Effect of Polyanion-Doping on the Structure and Electrochemical Performance of Li-Rich Layered Oxides as Cathode for Lithium-Ion Batteries , 2015 .

[52]  A. Busnaina,et al.  Mitigation of Layered to Spinel Conversion of a Li-Rich Layered Metal Oxide Cathode Material for Li-Ion Batteries , 2014 .

[53]  Chaochao Fu,et al.  Gel-combustion synthesis of Li1.2Mn0.4Co0.4O2 composites with a high capacity and superior rate capability for lithium-ion batteries , 2014 .

[54]  Kevin G. Gallagher,et al.  Countering the Voltage Decay in High Capacity xLi2MnO3•(1–x)LiMO2 Electrodes (M=Mn, Ni, Co) for Li+-Ion Batteries , 2012 .