Heat transfer modelling in a refrigerated display cabinet: The influence of operating conditions

Abstract The product temperature in refrigerated display cabinets is very variable and directly influences the safety and quality of food products. This variability is due to the type of display cabinet (vertical, horizontal), the position of the product inside the cabinet, fluctuations in the ambient temperature in supermarkets (day/night, opening hours, seasons, air conditioning, etc.) and the surrounding conditions of the display cabinet (in front of another refrigerated display cabinet or in front of grocery products, etc.). This study proposes a heat transfer model to predict the load temperature in an open vertical display cabinet. Heat transfer by conduction, convection and radiation was taken into account in the model. Four load positions were considered: top/front, top/rear, bottom/front and bottom/rear where the product temperatures are significantly different. The model was validated by comparing predicted values with experimental ones. Then it was used to predict the influence of various parameters such as the ambient temperature in the supermarket, the radiation temperature of the surrounding walls and the internal/external infiltration rates. Through integration of quality and microbiological predictive models, this approach can be used as a numerical tool for quality and sanitary evaluation of products displayed in display cabinets. The developed model will be further used in the modelling of the cold chain, which comprises several types of refrigeration equipment.

[1]  R A Holley,et al.  Temperatures and ages of boxed beef packed and distributed in Canada. , 2002, Meat science.

[2]  Savvas A. Tassou,et al.  Simulation of the performance of single jet air curtains for vertical refrigerated display cabinets , 2001 .

[3]  Brenda S. Henderson,et al.  Jet entrainment rate in air curtain of open refrigerated display cases , 2005 .

[4]  Homayun K. Navaz,et al.  Tracer gas technique: A new approach for steady state infiltration rate measurement of open refrigerated display cases , 2009 .

[5]  Yun-Guang Chen,et al.  Experimental study of the performance of single-band air curtains for a multi-deck refrigerated display cabinet , 2005 .

[6]  Jean Moureh,et al.  A review of numerical models of airflow in refrigerated food applications , 2006 .

[7]  M. Manzan,et al.  CFD simulation of refrigerated display cabinets , 2001 .

[8]  Paul Tobback,et al.  A preliminary survey into the temperature conditions and residence time distribution of minimally processed MAP vegetables in Belgian retail display cabinets , 1994 .

[9]  Pedro Dinis Gaspar,et al.  THREE-DIMENSIONAL CFD MODELLING AND ANALYSIS OF THE THERMAL ENTRAINMENT IN OPEN REFRIGERATED DISPLAY CABINETS , 2008 .

[10]  Denis Flick,et al.  Temperature prediction in domestic refrigerators: Deterministic and stochastic approaches , 2010 .

[11]  Giovanni Cortella,et al.  cfd-aided retail cabinets design , 2002 .

[12]  C. Gill,et al.  Evaluation of the bacteriological consequences of the temperature regimes experienced by fresh chilled meat during retail display , 1994 .

[13]  Yun-Guang Chen,et al.  Parametric evaluation of refrigerated air curtains for thermal insulation , 2009 .

[14]  Brandon S. Field,et al.  Entrainment of refrigerated air curtains down a wall , 2006 .

[15]  Hua Han,et al.  Application of an effective strategy for optimizing the design of air curtains for open vertical refrigerated display cases , 2010 .

[16]  R. A. Holley,et al.  The temperatures and ages of packs of beef displayed in multi-shelf retail cabinets , 2003 .

[17]  Judith Evans,et al.  Temperature and energy performance of refrigerated retail display and commercial catering cabinets under test conditions , 2007 .