A review on plasma electrolytic oxidation (PEO) of niobium: Mechanism, properties and applications

[1]  A. Fattah‐alhosseini,et al.  On the enhanced antibacterial activity of plasma electrolytic oxidation (PEO) coatings that incorporate particles: A review , 2020 .

[2]  M. Kaseem,et al.  Plasma electrolytic oxidation of Ti-25Nb-xTa alloys in solution containing Ca and P ions , 2020 .

[3]  A. Fattah‐alhosseini,et al.  Surface characterization and corrosion behavior of calcium phosphate (Ca-P) base composite layer on Mg and its alloys using plasma electrolytic oxidation (PEO): A review , 2020, Journal of Magnesium and Alloys.

[4]  T. Lampke,et al.  Introduction to Plasma Electrolytic Oxidation—An Overview of the Process and Applications , 2020 .

[5]  A. Fattah‐alhosseini,et al.  Effect of ZrO2 nanoparticles addition to PEO coatings on Ti–6Al–4V substrate: Microstructural analysis, corrosion behavior and antibacterial effect of coatings in Hank's physiological solution , 2020 .

[6]  A. Fattah‐alhosseini,et al.  Effect of Procedure Time on Microstructure and Corrosion Behavior of ZrTiO4/ZrO2 Nanocomposite Coatings by Plasma Electrolytic Oxidation (PEO) Applied on the Ti-6Al-4V Substrate , 2020 .

[7]  H. Choe,et al.  Plasma electrolytic oxidation of Ti-6Al-4V alloy in electrolytes containing bone formation ions , 2020 .

[8]  A. Fattah‐alhosseini,et al.  Effect of particles addition to solution of plasma electrolytic oxidation (PEO) on the properties of PEO coatings formed on magnesium and its alloys: A review , 2020 .

[9]  A. Fattah‐alhosseini,et al.  Influence of electrolyte composition and voltage on the microstructure and growth mechanism of plasma electrolytic oxidation (PEO) coatings on tantalum: A review , 2020 .

[10]  H. Choe,et al.  Functional element coatings on Ti-alloys for biomaterials by plasma electrolytic oxidation , 2020 .

[11]  A. Fattah‐alhosseini,et al.  Plasma electrolytic oxidation (PEO) treatment of zinc and its alloys: A review , 2020 .

[12]  H. Esfahani,et al.  Increasing the in-vitro corrosion resistance of AZ31B-Mg alloy via coating with hydroxyapatite using plasma electrolytic oxidation , 2020 .

[13]  H. Choe,et al.  Corrosion behaviors of bioactive element coatings on PEO-treated Ti-6Al-4V alloys , 2019, Surface and Coatings Technology.

[14]  Yu Zhou,et al.  Growth of plasma electrolytic oxidation coatings on Nb and corresponding corrosion resistance , 2019, Applied Surface Science.

[15]  G. Burt,et al.  Superconducting properties of PEO coatings containing MgB2 on niobium , 2019, Journal of Applied Electrochemistry.

[16]  H. Choe,et al.  Bioactive apatite formation on PEO-treated Ti-6Al-4V alloy after 3rd anodic titanium oxidation , 2019, Applied Surface Science.

[17]  A. Fattah‐alhosseini,et al.  Influence of different sodium-based additives on corrosion resistance of PEO coatings on pure Ti , 2019, Journal of Asian Ceramic Societies.

[18]  T. W. Clyne,et al.  A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals , 2019 .

[19]  G. Burt,et al.  Communication—Formation of a Superconducting MgB2-Containing Coating on Niobium by Plasma Electrolytic Oxidation , 2019, ECS Journal of Solid State Science and Technology.

[20]  H. Choe,et al.  Surface morphology and cell behavior of Zn-coated Ti-6Al-4V alloy by RF-sputtering after PEO-treatment , 2019, Surface and Coatings Technology.

[21]  Yufeng Zheng,et al.  Formation Mechanism, Corrosion Behavior, and Cytocompatibility of Microarc Oxidation Coating on Absorbable High-Purity Zinc. , 2019, ACS biomaterials science & engineering.

[22]  N. Cruz,et al.  Growth of hydroxyapatite coatings on tantalum by plasma electrolytic oxidation in a single step , 2019, Surface and Coatings Technology.

[23]  S. Gnedenkov,et al.  Composite coatings formed using plasma electrolytic oxidation and fluoroparaffin materials , 2018, Journal of Alloys and Compounds.

[24]  A. Fattah‐alhosseini,et al.  Optimizing the electrolyte chemistry parameters of PEO coating on 6061 Al alloy by corrosion rate measurement: Response surface methodology , 2018, Measurement.

[25]  A. Fattah‐alhosseini,et al.  Plasma Electrolytic Oxidation (PEO) Process on Commercially Pure Ti Surface: Effects of Electrolyte on the Microstructure and Corrosion Behavior of Coatings , 2018, Metallurgical and Materials Transactions A.

[26]  S. Nourbakhsh,et al.  Microstructure and corrosion resistance of MAO coatings on AZ31 magnesium , 2018, Materials Research Express.

[27]  W. Simka,et al.  Electrochemical behavior of plasma electrolytically oxidized niobium in simulated physiological environment , 2018, Surface and Coatings Technology.

[28]  P. Chu,et al.  Electrochemical surface engineering of titanium-based alloys for biomedical application , 2018 .

[29]  A. Fattah‐alhosseini,et al.  Study of the effect of ZnO nanoparticles addition to PEO coatings on pure titanium substrate: Microstructural analysis, antibacterial effect and corrosion behavior of coatings in Ringer's physiological solution , 2018 .

[30]  W. Simka,et al.  Electrochemical Impedance and Polarization Corrosion Studies of Tantalum Surface Modified by DC Plasma Electrolytic Oxidation , 2018, Materials.

[31]  H. Choe,et al.  Mn-coatings on the micro-pore formed Ti-29Nb-xHf alloys by RF-magnetron sputtering for dental applications , 2018 .

[32]  A. Fattah‐alhosseini,et al.  Plasma Electrolytic Oxidation Coatings on Pure Ti Substrate: Effects of Na3PO4 Concentration on Morphology and Corrosion Behavior of Coatings in Ringer’s Physiological Solution , 2018, Journal of Materials Engineering and Performance.

[33]  C. Chou,et al.  Review of the Soft Sparking Issues in Plasma Electrolytic Oxidation , 2018 .

[34]  A. Fattah‐alhosseini,et al.  Effects of Disodium Phosphate Concentration (Na2HPO4·2H2O) on Microstructure and Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Coatings on 2024 Al Alloy , 2018, Journal of Materials Engineering and Performance.

[35]  S. Bhowmik,et al.  Plasma Processing of Aluminum Alloys to Promote Adhesion: A Critical Review , 2017, Progress in Adhesion and Adhesives.

[36]  I. Mazzaro,et al.  Niobium treated by Plasma Electrolytic Oxidation with calcium and phosphorus electrolytes. , 2018, Journal of the mechanical behavior of biomedical materials.

[37]  A. Ashmarin,et al.  Formation of zirconia tetragonal phase by plasma electrolytic oxidation of zirconium alloy in electrolyte comprising additives of yttria nanopowder , 2017 .

[38]  M. Usta,et al.  In vitro properties of bioceramic coatings produced on zirconium by plasma electrolytic oxidation , 2017 .

[39]  I. Mazzaro,et al.  Apatite grown in niobium by two-step plasma electrolytic oxidation. , 2017, Materials science & engineering. C, Materials for biological applications.

[40]  L. Stanciu,et al.  Microarc oxidation discharge types and bio properties of the coating synthesized on zirconium. , 2017, Materials science & engineering. C, Materials for biological applications.

[41]  A. Fattah‐alhosseini,et al.  Effects of Duty Cycle, Current Frequency, and Current Density on Corrosion Behavior of the Plasma Electrolytic Oxidation Coatings on 6061 Al Alloy in Artificial Seawater , 2017, Metallurgical and Materials Transactions A.

[42]  E. Kurmaev,et al.  Influence of process parameters on plasma electrolytic surface treatment of tantalum for biomedical applications , 2017 .

[43]  Mohd Halim Irwan Ibrahim,et al.  Study of corrosion in biocompatible metals for implants: A review , 2017 .

[44]  M. Aliofkhazraei,et al.  Plasma electrolytic oxidation of magnesium and its alloys: Mechanism, properties and applications , 2017 .

[45]  E. Han,et al.  Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: The influence of porosity , 2017 .

[46]  Guang-zhong Li,et al.  Surface modification of biomedical tantalum by micro-arc oxidation , 2017 .

[47]  Yufeng Zhang,et al.  The improved thermal radiation property of SiC doped microarc oxidation ceramic coating formed on niobium metal for metal thermal protective system , 2017 .

[48]  G. Song,et al.  Effects of Different Levels of Boron on Microstructure and Hardness of CoCrFeNiAlxCu0.7Si0.1By High-Entropy Alloy Coatings by Laser Cladding , 2017 .

[49]  A. Fattah‐alhosseini,et al.  Sodium Aluminate Concentration Effects on Microstructure and Corrosion Behavior of the Plasma Electrolytic Oxidation Coatings on Pure Titanium , 2017, Metallurgical and Materials Transactions A.

[50]  M. Zheludkevich,et al.  Plasma electrolytic oxidation coatings with particle additions – A review , 2016 .

[51]  S. Stojadinović,et al.  Orange–red photoluminescence of Nb2O5:Eu3+, Sm3+ coatings formed by plasma electrolytic oxidation of niobium , 2016 .

[52]  A. Fattah‐alhosseini,et al.  Effects of Al2O3 Nano-Particles on Corrosion Performance of Plasma Electrolytic Oxidation Coatings Formed on 6061 Aluminum Alloy , 2016, Journal of Materials Engineering and Performance.

[53]  A. Uzunoğlu,et al.  Direct fabrication of crystalline hydroxyapatite coating on zirconium by single-step plasma electrolytic oxidation process , 2016 .

[54]  M. Graça,et al.  Niobium oxides and niobates physical properties: Review and prospects , 2016 .

[55]  I. Todd,et al.  Mechanical and electrochemical characterisation of new Ti-Mo-Nb-Zr alloys for biomedical applications. , 2016, Journal of the mechanical behavior of biomedical materials.

[56]  E. Kurmaev,et al.  Surface characterisation and corrosion behaviour of niobium treated in a Ca- and P-containing solution under sparking conditions , 2016 .

[57]  Gustavo Frainer Barbosa,et al.  Achieving surface chemical and morphologic alterations on tantalum by plasma electrolytic oxidation , 2016, International Journal of Implant Dentistry.

[58]  Yufeng Zheng,et al.  In Vitro Corrosion and Cytocompatibility of a Microarc Oxidation Coating and Poly(L-lactic acid) Composite Coating on Mg-1Li-1Ca Alloy for Orthopedic Implants. , 2016, ACS applied materials & interfaces.

[59]  A. Fattah‐alhosseini,et al.  Effect of KOH concentration on the electrochemical behavior of coatings formed by pulsed DC micro-arc oxidation (MAO) on AZ31B Mg alloy , 2016 .

[60]  S. Gnedenkov,et al.  Functional coatings formed on the titanium and magnesium alloys as implant materials by plasma electrolytic oxidation technology: fundamental principles and synthesis conditions , 2016 .

[61]  A. Fattah‐alhosseini,et al.  Influence of Concentrations of KOH and Na2SiO3 Electrolytes on the Electrochemical Behavior of Ceramic Coatings on 6061 Al Alloy Processed by Plasma Electrolytic Oxidation , 2016, Acta Metallurgica Sinica (English Letters).

[62]  M. Costache,et al.  Electrochemical comparison and biological performance of a new CoCrNbMoZr alloy with commercial CoCrMo alloy. , 2016, Materials science & engineering. C, Materials for biological applications.

[63]  Yong Han,et al.  The structure, bond strength and apatite-inducing ability of micro-arc oxidized tantalum and their response to annealing , 2016 .

[64]  P. Chapon,et al.  XPS and GDOES Characterization of Porous Coating Enriched with Copper and Calcium Obtained on Tantalum via Plasma Electrolytic Oxidation , 2016 .

[65]  R. Chung,et al.  Effects of duty cycle and electrolyte concentration on the microstructure and biocompatibility of plasma electrolytic oxidation treatment on zirconium metal , 2015 .

[66]  A. R. Bushroa,et al.  Surface characterization and corrosion behavior of calcium phosphate-base composite layer on titanium and its alloys via plasma electrolytic oxidation: A review paper. , 2015, Materials science & engineering. C, Materials for biological applications.

[67]  Chuanzhong Chen,et al.  Review of the biocompatibility of micro-arc oxidation coated titanium alloys , 2015 .

[68]  S. Stojadinović,et al.  Anodic luminescence, structural, photoluminescent, and photocatalytic properties of anodic oxide films grown on niobium in phosphoric acid , 2015 .

[69]  Gamze Atak,et al.  The effects of heat treatment on optical, structural, electrochromic and bonding properties of Nb2O5 thin films , 2015 .

[70]  C. Sanjeeviraja,et al.  Niobium pentoxide (Nb2O5) thin films: rf Power and substrate temperature induced changes in physical properties , 2015 .

[71]  A. Fattah‐alhosseini,et al.  Effect of KOH Concentration on the Microstructure and Electrochemical Properties of MAO-Coated Mg Alloy AZ31B , 2015, Journal of Materials Engineering and Performance.

[72]  A. Mansur,et al.  Niobium-Doped Hydroxyapatite Bioceramics: Synthesis, Characterization and In Vitro Cytocompatibility , 2015, Materials.

[73]  V. G. Vostrikov,et al.  The study of plasma electrolytic oxidation coatings on Zr and Zr-1% Nb alloy at thermal cycling , 2015 .

[74]  Y. Gu,et al.  Advances in microarc oxidation coated AZ31 Mg alloys for biomedical applications , 2015 .

[75]  G. Thouas,et al.  Metallic implant biomaterials , 2015 .

[76]  M. Sandhyarani,et al.  Role of electrolyte composition on structural, morphological and in-vitro biological properties of plasma electrolytic oxidation films formed on zirconium , 2014 .

[77]  A. Lugovskoy,et al.  Production of hydroxyapatite layers on the plasma electrolytically oxidized surface of titanium alloys. , 2014, Materials science & engineering. C, Materials for biological applications.

[78]  J. Zak,et al.  Influence of electropolishing and anodic oxidation on morphology, chemical composition and corrosion resistance of niobium. , 2014, Materials science & engineering. C, Materials for biological applications.

[79]  Ricardo M. Souto,et al.  Metastable beta Ti-Nb-Mo alloys with improved corrosion resistance in saline solution , 2014 .

[80]  V. B. Lyudin,et al.  Microarc oxidation of magnesium alloys: A review , 2014 .

[81]  T. narayanan,et al.  Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges , 2014 .

[82]  Y. Z. Zhang,et al.  Bioactive tantalum metal prepared by micro-arc oxidation and NaOH treatment. , 2014, Journal of materials chemistry. B.

[83]  N. Rajendran,et al.  Biomimetic novel nanoporous niobium oxide coating for orthopaedic applications , 2014 .

[84]  M. Sandhyarani,et al.  Fabrication, characterization and in-vitro evaluation of nanostructured zirconia/hydroxyapatite composite film on zirconium , 2014 .

[85]  Jian Zhen Ou,et al.  High performance electrochromic devices based on anodized nanoporous Nb2O5 , 2014 .

[86]  R. Socha,et al.  Modification of niobium surfaces using plasma electrolytic oxidation in silicate solutions , 2014, Journal of Solid State Electrochemistry.

[87]  R. Socha,et al.  Modification of tantalum surface via plasma electrolytic oxidation in silicate solutions , 2013 .

[88]  D. Northwood,et al.  An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing , 2013 .

[89]  M. Qian,et al.  Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material. , 2013, Journal of the mechanical behavior of biomedical materials.

[90]  Ke Yang,et al.  The in vitro degradation process and biocompatibility of a ZK60 magnesium alloy with a forsterite-containing micro-arc oxidation coating. , 2013, Acta biomaterialia.

[91]  P. Chu,et al.  Surface design of biodegradable magnesium alloys — A review , 2013 .

[92]  W. Simka,et al.  Application of plasma electrolytic oxidation to bioactive surface formation on titanium and its alloys , 2013 .

[93]  M. Sandhyarani,et al.  Role of electrolyte chemistry on electronic and in vitro electrochemical properties of micro-arc oxidized titania films on Cp Ti , 2013 .

[94]  M. Sandhyarani,et al.  Surface morphology, corrosion resistance and in vitro bioactivity of P containing ZrO2 films formed on Zr by plasma electrolytic oxidation , 2013 .

[95]  D. Song,et al.  Comparative analysis for corrosion resistance of micro-arc oxidation coatings on coarse-grained and ultra-fine grained AZ91D Mg alloy , 2013 .

[96]  P. Uggowitzer,et al.  In vivo degradation performance of micro-arc-oxidized magnesium implants: a micro-CT study in rats. , 2013, Acta biomaterialia.

[97]  B. Kasalica,et al.  Characterization of the plasma electrolytic oxidation of titanium in sodium metasilicate , 2013 .

[98]  Yong Han,et al.  Structural characteristics and outward–inward growth behavior of tantalum oxide coatings on tantalum by micro-arc oxidation , 2013 .

[99]  T. Wong.  Niobium: Properties, Production and Applications , 2013 .

[100]  K. Kalantar-zadeh,et al.  Nanoporous Nb2O5 hydrogen gas sensor , 2013 .

[101]  M. Usta,et al.  Characterization and mechanical properties of coatings on magnesium by micro arc oxidation , 2012 .

[102]  M. Niinomi,et al.  Development of new metallic alloys for biomedical applications. , 2012, Acta biomaterialia.

[103]  Y. Gu,et al.  Corrosion mechanism and model of pulsed DC microarc oxidation treated AZ31 alloy in simulated body fluid , 2012 .

[104]  G. Thompson,et al.  The influences of microdischarge types and silicate on the morphologies and phase compositions of plasma electrolytic oxidation coatings on Zircaloy-2 , 2012 .

[105]  N. I. Steblevskaya,et al.  Combination of plasma-electrolytic oxidation and extraction-pyrolytic method for formation of metal oxide layers , 2012, Russian Journal of Applied Chemistry.

[106]  G. Thompson,et al.  Plasma electrolytic oxidation and corrosion protection of Zircaloy-4. , 2012 .

[107]  P. Schmuki,et al.  Visible light photo response from N-doped anodic niobium oxide after annealing in ammonia atmosphere , 2012 .

[108]  G. Thompson,et al.  Characterization of plasma electrolytic oxidation coatings on Zircaloy-4 formed in different electrolytes with AC current regime , 2011 .

[109]  S. Stojadinović,et al.  Characterization of oxide coatings formed on tantalum by plasma electrolytic oxidation in 12-tungstosilicic acid , 2011 .

[110]  N. Konjević,et al.  Spectroscopic and real-time imaging investigation of tantalum plasma electrolytic oxidation (PEO) , 2011 .

[111]  S. Yang,et al.  Effect of electrolyte temperature on the formation of self-organized anodic niobium oxide microcones in hot phosphate–glycerol electrolyte , 2011 .

[112]  Jian-qing Zhang,et al.  The preparation and corrosion behaviors of MAO coating on AZ91D with rare earth conversion precursor film , 2011 .

[113]  Jhon Jairo Olaya,et al.  Niobium based coatings for dental implants , 2011 .

[114]  W. Xue,et al.  Characterization of ceramic coatings fabricated on zirconium alloy by plasma electrolytic oxidation in silicate electrolyte , 2010 .

[115]  A. Yerokhin,et al.  Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process , 2010 .

[116]  H. Asoh,et al.  Effects of electrolyte pH and temperature on dielectric properties of anodic oxide films formed on niobium , 2009 .

[117]  C. Low,et al.  Plasma electrolytic oxidation (PEO) for production of anodised coatings on lightweight metal (Al, Mg, Ti) alloys , 2009 .

[118]  Cheng Xu,et al.  Structure and optical properties of Nb2O5 sculptured thin films by glancing angle deposition , 2008 .

[119]  O. R. Mattos,et al.  Influences of ion migration and electric field on the layered anodic films on Al–Mg alloys , 2008 .

[120]  Fu-hui Wang,et al.  Growth process of plasma electrolytic oxidation films formed on magnesium alloy AZ91D in silicate solution , 2007 .

[121]  K. Shimizu,et al.  Development of anodic coatings on aluminium under sparking conditions in silicate electrolyte , 2007 .

[122]  K. Matsumoto,et al.  Mechanism of formation and growth of sunflower-shaped imperfections in anodic oxide films on niobium , 2007 .

[123]  G. Song,et al.  Anodizing Treatments for Magnesium Alloys and Their Effect on Corrosion Resistance in Various Environments , 2006 .

[124]  J. Wang,et al.  Characteristics of anodic coatings oxidized to different voltage on AZ91D Mg alloy by micro‐arc oxidization technique , 2005 .

[125]  E. Eisenbarth,et al.  Biocompatibility of β-stabilizing elements of titanium alloys , 2004 .

[126]  L. Bulhões,et al.  Breakdown of the niobium oxide film under galvanostatic polarisation and in acid solutions , 2004 .

[127]  Fatma Z. Tepehan,et al.  Comparison of optical, structural and electrochromic properties of undoped and WO3-doped Nb2O5 thin films , 2003 .

[128]  A. Matthews,et al.  Discharge characterization in plasma electrolytic oxidation of aluminium , 2003 .

[129]  Mitsuo Niinomi,et al.  Recent metallic materials for biomedical applications , 2002 .

[130]  W. Xue,et al.  Growth regularity of ceramic coatings formed by microarc oxidation on Al–Cu–Mg alloy , 2000 .

[131]  A. Matthews,et al.  Plasma electrolysis for surface engineering , 1999 .

[132]  A. Yerokhin,et al.  Phase formation in ceramic coatings during plasma electrolytic oxidation of aluminium alloys , 1998 .

[133]  S. Maken,et al.  Anodic oxidation of niobium in aqueous solution of weak organic acids , 1987 .

[134]  G. Thompson,et al.  Formation of relatively pure alumina films by anodic polarization , 1987 .

[135]  D. C. Goldberg,et al.  NIOBIUM AND NIOBIUM ALLOYS IN NUCLEAR POWER. , 1972 .