Anisotropic properties of human tibial cortical bone as measured by nanoindentation

The purpose of this study was to investigate the effects of elastic anisotropy on nanoindentation measurements in human tibial cortical bone. Nanoindentation was conducted in 12 different directions in three principal planes for both osteonic and interstitial lamellae. The experimental indentation modulus was found to vary with indentation direction and showed obvious anisotropy (oneway analysis of variance test, P < 0.0001). Because experimental indentation modulus in a specific direction is determined by all of the elastic constants of cortical bone, a complex theoretical model is required to analyze the experimental results. A recently developed analysis of indentation for the properties of anisotropic materials was used to quantitatively predict indentation modulus by using the stiffness matrix of human tibial cortical bone, which was obtained from previous ultrasound studies. After allowing for the effects of specimen preparation (dehydrated specimens in nanoindentation tests vs. moist specimens in ultrasound tests) and the structural properties of bone (different microcomponents with different mechanical properties), there were no statistically significant differences between the corrected experimental indentation modulus (Mexp) values and corresponding predicted indentation modulus (Mpre) values (two‐tailed unpaired t‐test, P < 0.5). The variation of Mpre values was found to exhibit the same trends as the corrected Mexp data. These results show that the effects of anisotropy on nanoindentation measurements can be quantitatively evaluated. © 2002 Orthopaedic Research Society. Published by Elsevier Science Ltd. All rights reserved.

[1]  A Boyde,et al.  Orientation of collagen in human tibial and fibular shaft and possible correlation with mechanical properties. , 1989, Bone.

[2]  S. Weiner,et al.  Lamellar bone: structure-function relations. , 1999, Journal of structural biology.

[3]  S. Weiner,et al.  Anisotropic mechanical properties of lamellar bone using miniature cantilever bending specimens. , 1999, Journal of biomechanics.

[4]  G. Pharr,et al.  Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation. , 1997, Biomaterials.

[5]  G. Pharr,et al.  Effects of anisotropy on elastic moduli measured by nanoindentation in human tibial cortical bone. , 2001, Journal of biomedical materials research.

[6]  Timo Jämsä,et al.  Mechanical properties in long bones of rat osteopetrotic mutations. , 2002, Journal of biomechanics.

[7]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[8]  A. Meunier,et al.  Scanning acoustic microscope studies of the elastic properties of osteons and osteon lamellae. , 1993, Journal of biomechanical engineering.

[9]  Joost J. Vlassak,et al.  Indentation modulus of elastically anisotropic half spaces , 1993 .

[10]  J Y Rho,et al.  Elastic properties of microstructural components of human bone tissue as measured by nanoindentation. , 1999, Journal of biomedical materials research.

[11]  G. Pharr,et al.  Indentation of elastically anisotropic half-spaces by cones and parabolae of revolution , 2001 .

[12]  A. E. Giannakopoulos,et al.  Analysis of Berkovich indentation , 1996 .

[13]  G. Pharr,et al.  Effects of drying on the mechanical properties of bovine femur measured by nanoindentation , 1999, Journal of materials science. Materials in medicine.

[14]  J. Rho.  An ultrasonic method for measuring the elastic properties of human tibial cortical and cancellous bone. , 1996, Ultrasonics.

[15]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[16]  S. Weiner,et al.  Microstructure-microhardness relations in parallel-fibered and lamellar bone. , 1996, Bone.

[17]  S. Goldstein,et al.  Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur. , 1999, Journal of biomechanics.

[18]  G. Pharr,et al.  Variations in the individual thick lamellar properties within osteons by nanoindentation. , 1999, Bone.

[19]  R. King,et al.  Elastic analysis of some punch problems for a layered medium , 1987 .

[20]  G. Pharr,et al.  Microstructural elasticity and regional heterogeneity in human femoral bone of various ages examined by nano-indentation. , 2002, Journal of biomechanics.

[21]  H. Wagner,et al.  Elastic constants of three-dimensional orthotropic composites with platelet/ribbon reinforcement , 1997 .