论文信息 - Sequentially stacked 3DIC technology using green nanosecond laser crystallization and laser spike annealing technologies

Sequentially stacked 3DIC technology using green nanosecond laser crystallization and laser spike annealing technologies

For 3D monolithic integrated (3DMI) technology, the most important task is to fabricate high performance stackable device and prevent damage on underlying device and structure during processes. In this article, we propose a green nanosecond laser crystallization and laser spike anneal process to fabricate 3D stackable ultra-thin body transistors and realize a sequentially layered integrated circuit. As identified, the possible failure mechanism of underlying device using laser process is the directly penetrated laser light and the heat from the high temperature surface. By optimizing the process conditions and stacking layer thickness, we can reduce the thickness of interlayer dielectric to about 200-nm-thin which quite reducing the delay and power loss from interconnects for 3DIC.

[1] C. Hu,et al. 3D Ferroelectric-like NVM/CMOS hybrid chip by sub-400 °C sequential layered integration , 2012, 2012 International Electron Devices Meeting.

[2] J. Mazurier,et al. Advances, challenges and opportunities in 3D CMOS sequential integration , 2011, 2011 International Electron Devices Meeting.

[3] Tien-Sheng Chao,et al. Novel GAA raised source / drain sub-10-nm poly-Si NW channel TFTs with self-aligned corked gate structure for 3-D IC applications , 2011, 2011 Symposium on VLSI Technology - Digest of Technical Papers.

[4] S. Wu,et al. World's first monolithic 3D-FPGA with TFT SRAM over 90nm 9 layer Cu CMOS , 2010, 2010 Symposium on VLSI Technology.

[5] P. Kapur,et al. Low temperature (≤ 380°C) and high performance Ge CMOS technology with novel source/drain by metal-induced dopants activation and high-k/metal gate stack for monolithic 3D integration , 2008, 2008 IEEE International Electron Devices Meeting.