Innovations With 3‐Dimensional Printing in Physical Medicine and Rehabilitation: A Review of the Literature

Created more than 30 years ago, 3‐dimensional printing (3DP) has recently seen a meteoric rise in interest within medicine, and the field of Physical Medicine and Rehabilitation is no exception. Also called additive manufacturing (AM), the recent increase in the use of 3DP is likely due to lower‐cost printers as well as breakthroughs in techniques and processing. This thematic narrative review serves to introduce the rehabilitation professional to 3DP technology and how it is being applied to orthoses, prostheses, and assistive technology (AT). The basics of the technology, as well as the benefits and challenges of using it within the rehabilitation framework, are described. Proponents of the technology suggest that 3DP offers not only a better way to make devices, but a better way to make improved devices. However, the strength of this claim has not been properly tested by the current literature. This narrative review evaluates the evidence and provides a discussion of possible implications for the rehabilitation professional.

[1]  Pankaj Karande,et al.  Design and fabrication of human skin by three-dimensional bioprinting. , 2014, Tissue engineering. Part C, Methods.

[2]  D L Bader,et al.  Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications. , 2015, Medical engineering & physics.

[3]  Abby M Paterson,et al.  Computer-aided design to support fabrication of wrist splints using 3D printing: A feasibility study , 2014 .

[4]  James Woodburn,et al.  Dose-response effects of customised foot orthoses on lower limb kinematics and kinetics in pronated foot type. , 2013, Journal of biomechanics.

[5]  Paolo Bonato,et al.  Patient specific ankle-foot orthoses using rapid prototyping , 2011, Journal of NeuroEngineering and Rehabilitation.

[6]  Amy Hurst,et al.  VizTouch: automatically generated tactile visualizations of coordinate spaces , 2012, TEI.

[7]  Jari Pallari,et al.  Embracing additive manufacture: implications for foot and ankle orthosis design , 2012, BMC Musculoskeletal Disorders.

[8]  Amy Hurst,et al.  Empowering individuals with do-it-yourself assistive technology , 2011, ASSETS.

[9]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[10]  Carlos Alberto Fortulan,et al.  A new design for an old concept of wheelchair pushrim , 2012, Disability and rehabilitation. Assistive technology.

[11]  Marc F Swiontkowski,et al.  Introducing levels of evidence to the journal , 2011, The Journal of bone and joint surgery. American volume.

[12]  Tim Caffrey,et al.  Wohlers report 2013 : additive manufacturing and 3D printing state of the industry : annual worldwide progress report , 2013 .

[13]  J Foort,et al.  Computer-aided design and manufacture of an above-knee amputee socket. , 1991, Journal of biomedical engineering.

[14]  Mika Salmi,et al.  Imaging requirements for medical applications of additive manufacturing , 2014, Acta radiologica.

[15]  Richard J. Bibb,et al.  Comparing additive manufacturing technologies for customised wrist splints , 2015 .

[16]  Andre S. Salles,et al.  The specification of personalised insoles using additive manufacturing. , 2012, Work.

[17]  Nicholas Herbert,et al.  A preliminary investigation into the development of 3-D printing of prosthetic sockets. , 2005, Journal of rehabilitation research and development.

[18]  Cristina Fernandez,et al.  Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences , 2015, BMC Research Notes.

[19]  D. Cho,et al.  3D printing of composite tissue with complex shape applied to ear regeneration , 2014, Biofabrication.

[20]  James Woodburn,et al.  Personalized foot orthoses with embedded temperature sensing: Proof of concept and relationship with activity. , 2014, Medical engineering & physics.

[21]  Avinash S. Bidra,et al.  Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. , 2013, The Journal of prosthetic dentistry.

[22]  William L. Berry,et al.  Approaches to mass customization: configurations and empirical validation , 2000 .

[23]  Nicholas P. Fey,et al.  The influence of energy storage and return foot stiffness on walking mechanics and muscle activity in below-knee amputees. , 2011, Clinical biomechanics.

[24]  J Foort,et al.  A computer-aided socket design procedure for above-knee prostheses. , 1992, Journal of rehabilitation research and development.

[25]  Kenneth W. Dalgarno,et al.  Mass Customization of Foot Orthoses for Rheumatoid Arthritis Using Selective Laser Sintering , 2010, IEEE Transactions on Biomedical Engineering.

[26]  Kendall F Gretsch,et al.  Development of novel 3D-printed robotic prosthetic for transradial amputees , 2016, Prosthetics and orthotics international.

[27]  Hugh M. Herr,et al.  A Variable-Impedance Prosthetic Socket for a Transtibial Amputee Designed from Magnetic Resonance Imaging Data , 2013 .

[28]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[29]  Benjamin M Wu,et al.  Recent advances in 3D printing of tissue engineering scaffolds. , 2012, Methods in molecular biology.

[30]  Gi Dae Kim,et al.  A benchmark study on rapid prototyping processes and machines: Quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost , 2008 .

[31]  G R Fernie,et al.  Computer-aided design and computer-aided manufacturing (CAD/CAM) in prosthetics. , 1990, Clinical orthopaedics and related research.

[32]  D G Smith,et al.  The use of CAD/CAM technology in prosthetics and orthotics--current clinical models and a view to the future. , 2001, Journal of rehabilitation research and development.

[33]  Steven J Stanhope,et al.  Dimensional accuracy of ankle-foot orthoses constructed by rapid customization and manufacturing framework. , 2011, Journal of rehabilitation research and development.

[34]  B Phillips,et al.  Predictors of assistive technology abandonment. , 1993, Assistive technology : the official journal of RESNA.

[35]  Richard R Neptune,et al.  The influence of ankle-foot orthosis stiffness on walking performance in individuals with lower-limb impairments. , 2014, Clinical biomechanics.

[36]  L. H. Hsu,et al.  The Development of a Rapid Prototyping Prosthetic Socket Coated with a Resin Layer for Transtibial Amputees , 2010, Prosthetics and orthotics international.

[37]  M J Scherer,et al.  Outcomes of assistive technology use on quality of life. , 1996, Disability and rehabilitation.

[38]  Richard H. Crawford,et al.  Manufacture of Passive Dynamic Ankle–Foot Orthoses Using Selective Laser Sintering , 2008, IEEE Transactions on Biomedical Engineering.

[39]  P V S Lee,et al.  Structural integrity of polypropylene prosthetic sockets manufactured using the polymer deposition technique , 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[40]  Nicholas Dunne,et al.  Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique. , 2014, Materials science & engineering. C, Materials for biological applications.

[41]  John D Russell,et al.  America Makes: The National Additive Manufacturing Innovation Institute (NAMII) Status Report and Future Opportunities (Postprint) , 2014 .

[42]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[43]  Dellene Sakaguchi,et al.  Orthotics and Prosthetics in Rehabilitation , 2013 .

[44]  Jim Banks,et al.  Adding Value in Additive Manufacturing : Researchers in the United Kingdom and Europe Look to 3D Printing for Customization , 2013, IEEE Pulse.