Synthesis and dielectric characterisation of a low loss BaSrTiO3/ABS ceramic/polymer composite for fused filament fabrication additive manufacturing

[1]  Daniel S. Engstrøm,et al.  Additively manufactured ultra-low sintering temperature, low loss Ag2Mo2O7 ceramic substrates , 2021 .

[2]  Ge Wang,et al.  Direct Integration of Cold Sintered, Temperature-Stable Bi2Mo2O9-K2MoO4 Ceramics on Printed Circuit Boards for Satellite Navigation Antennas , 2020, Journal of the European Ceramic Society.

[3]  Daniel S. Engstrøm,et al.  Fused filament fabrication of functionally graded polymer composites with variable relative permittivity for microwave devices , 2020 .

[4]  Gregory A. Mitchell,et al.  Composite Materials Development for Fused Filament Fabrication of RF Systems , 2020, 2020 International Applied Computational Electromagnetics Society Symposium (ACES).

[5]  Ge Wang,et al.  Cold sintered CaTiO3-K2MoO4 microwave dielectric ceramics for integrated microstrip patch antennas , 2020, Applied Materials Today.

[6]  Elif Ozden Yenigun,et al.  Electrically conductive high-performance thermoplastic filaments for fused filament fabrication , 2020 .

[7]  D. Steingart,et al.  Polymer–Nanocrystal Nanocomposites: Device Concepts in Capacitors and Multiferroics , 2020, IEEE Transactions on Nanotechnology.

[8]  Shilin Liu,et al.  Low dielectric loss LNT/PEEK composites with high mechanical strength and dielectric thermal stability , 2020, International Journal of Applied Ceramic Technology.

[9]  Daniel S. Engstrøm,et al.  The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites , 2019, Designs.

[10]  M. Mirotznik,et al.  Fabrication of low dielectric constant composite filaments for use in fused filament fabrication 3D printing , 2019 .

[11]  Daniel S. Engstrøm,et al.  Evaluation of Microwave Characterization Methods for Additively Manufactured Materials , 2019, Designs.

[12]  Stepan Lucyszyn,et al.  Microwave Characterization of Low-Loss FDM 3-D Printed ABS With Dielectric-Filled Metal-Pipe Rectangular Waveguide Spectroscopy , 2019, IEEE Access.

[13]  Mazher Iqbal Mohammed,et al.  Investigation of Closed-Loop Manufacturing with Acrylonitrile Butadiene Styrene over Multiple Generations Using Additive Manufacturing , 2019, ACS Sustainable Chemistry & Engineering.

[14]  P. Veselý,et al.  Application Possibilities of Fused Filament Fabrication Technology for High-Voltage and Medium-Voltage Insulation Systems , 2019, 2019 42nd International Spring Seminar on Electronics Technology (ISSE).

[15]  James M. Monkevich,et al.  Design and Fabrication of a Custom-Dielectric Fresnel Multi-Zone Plate Lens Antenna Using Additive Manufacturing Techniques , 2019, IEEE Access.

[16]  Z. Xue,et al.  Wideband Endfire 3-D-Printed Dielectric Antenna With Designable Permittivity , 2018, IEEE Antennas and Wireless Propagation Letters.

[17]  J. Zhai,et al.  High-energy-density with polymer nanocomposites containing of SrTiO3 nanofibers for capacitor application , 2018, Composites Part A: Applied Science and Manufacturing.

[18]  B. Khatri,et al.  Fused Deposition Modeling of ABS-Barium Titanate Composites: A Simple Route towards Tailored Dielectric Devices , 2018, Polymers.

[19]  Siew Ting Melissa Tan,et al.  Electrically conductive filament for 3D-printed circuits and sensors , 2017 .

[20]  Patrick S Grant,et al.  Fabrication of Composite Filaments with High Dielectric Permittivity for Fused Deposition 3D Printing , 2017, Materials.

[21]  M. Sebastian,et al.  Polymer–Ceramic Composites for Microwave Applications , 2017 .

[22]  Shiyu Zhang,et al.  Three-dimensional printed millimetre wave dielectric resonator reflectarray , 2017 .

[23]  Longtu Li,et al.  Thermally stable polymer–ceramic composites for microwave antenna applications , 2016, Journal of Advanced Ceramics.

[24]  S. Noghanian,et al.  High frequency characterisation of wood-fill PLA for antenna additive manufacturing application , 2016 .

[25]  F. Castles,et al.  Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites , 2016, Scientific Reports.

[26]  Sima Noghanian,et al.  Developing flexible 3D printed antenna using conductive ABS materials , 2015, 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting.

[27]  Shengtao Li,et al.  Fundamentals, processes and applications of high-permittivity polymer–matrix composites , 2012 .

[28]  M. Sebastian,et al.  Enhanced permittivity by the adhesion of conducting and low‐loss insulating ceramics in polystyrene , 2009 .

[29]  V. Deepu,et al.  Preparation, characterization and properties of Sm2Si2O7 loaded polymer composites for microelectronic applications , 2009 .

[30]  P. Mohanan,et al.  Polystyrene/Sr2Ce2Ti5O15 composites with low dielectric loss for microwave substrate applications , 2009 .

[31]  Hong Wang,et al.  Microwave Dielectric Properties of Low Temperature Firing Bi2Mo2O9 Ceramic , 2008 .

[32]  J. Volakis,et al.  Polymer–Ceramic Composites for Microwave Applications: Fabrication and Performance Assessment , 2006, IEEE Transactions on Microwave Theory and Techniques.

[33]  I. Reaney,et al.  Microwave Dielectric Ceramics for Resonators and Filters in Mobile Phone Networks , 2006 .

[34]  S. Wada,et al.  Evaluation and Statistical Analysis of Dielectric Permittivity of BaTiO3 Powders , 2006 .

[35]  R. Popielarz,et al.  Polymer Composites with High Dielectric Constant , 2002 .

[36]  C. Tracy,et al.  Characterization of sputtered barium strontium titanate and strontium titanate-thin films , 1997 .