Particulate Matter Emissions in Gasoline Direct-Injection Spark-Ignition Engines: Sources, Fuel Dependency, and Quantities

[1]  D. Reuss,et al.  The influence of intake flow and coolant temperature on gasoline spray morphology during early-injection DISI engine operation , 2022, International Journal of Engine Research.

[2]  J. Manin,et al.  Soot and PAH formation in high pressure spray pyrolysis of gasoline and diesel fuels , 2022, Combustion and Flame.

[3]  C. Tornatore,et al.  Optical Investigation of a Partial Fuel Stratification Strategy to Stabilize Overall Lean Operation of a DISI Engine Fueled with Gasoline and E30 , 2021 .

[4]  L. Pickett,et al.  Spatio-temporal identification of plume dynamics by 3D computed tomography using engine combustion network spray G injector and various fuels , 2020 .

[5]  D. Vuilleumier,et al.  Ability of Particulate Matter Index to describe sooting tendency of various gasoline formulations in a stratified-charge spark-ignition engine , 2020 .

[6]  D. Reuss,et al.  Effect of engine conditions and injection timing on piston-top fuel films for stratified direct-injection spark-ignition operation using E30 , 2020, International Journal of Engine Research.

[7]  K. Nakata,et al.  On the Role of Nitric Oxide for the Knock-Mitigation Effectiveness of EGR in a DISI Engine Operated with Various Gasoline Fuels , 2019 .

[8]  T. Aizawa,et al.  In-Cylinder GDI Soot via Visualization and Time-Resolved Total Cylinder Sampling , 2019, SAE Technical Paper Series.

[9]  Xiang-rong Li,et al.  Impact of coolant temperature on piston wall-wetting and smoke generation in a stratified-charge DISI engine operated on E30 fuel , 2019, Proceedings of the Combustion Institute.

[10]  D. Vuilleumier,et al.  Uncertainty Assessment of Octane Index Framework for Stoichiometric Knock Limits of Co-Optima Gasoline Fuel Blends , 2018, SAE International Journal of Fuels and Lubricants.

[11]  D. Reuss,et al.  Fuel film thickness measurements using refractive index matching in a stratified-charge SI engine operated on E30 and alkylate fuels , 2018 .

[12]  S. Skeen,et al.  Measuring the soot onset temperature in high-pressure n-dodecane spray pyrolysis , 2018 .

[13]  David Vuilleumier,et al.  The Use of Transient Operation to Evaluate Fuel Effects on Knock Limits Well beyond RON Conditions in Spark-Ignition Engines , 2017 .

[14]  L. Pickett,et al.  Onset and progression of soot in high-pressure n-dodecane sprays under diesel engine conditions , 2017 .

[15]  Anders Ivarsson,et al.  Diffuse back-illumination setup for high temporally resolved extinction imaging. , 2017, Applied optics.

[16]  Yanzhao An,et al.  An experimental study of polycyclic aromatic hydrocarbons and soot emissions from a GDI engine fueled with commercial gasoline , 2016 .

[17]  Hongming Xu,et al.  Fuel injector deposits in direct-injection spark-ignition engines , 2015 .

[18]  Rolf D. Reitz,et al.  The Effect of Operating Parameters on Soot Emissions in GDI Engines , 2015 .

[19]  Wei Zeng,et al.  PIV examination of spray-enhanced swirl flow for combustion stabilization in a spray-guided stratified-charge direct-injection spark-ignition engine , 2015 .

[20]  Jose Martin Herreros,et al.  University of Birmingham Impact of Fuel and Injection System on Particle Emissions from a GDI Engine , 2014 .

[21]  M. Wensing,et al.  Systematic Investigation of the Influence of Ethanol Blending on Sooting Combustion in DISI Engines Using High-Speed Imaging and LII , 2014 .

[22]  A. La Rocca,et al.  Part-load particulate matter from a GDI engine and the connection with combustion characteristics , 2014 .

[23]  Axel H. Berndorfer,et al.  Diffusion Combustion Phenomena in GDi Engines caused by Injection Process , 2013 .

[24]  M. Wooldridge,et al.  In-Cylinder Particulate Matter and Spray Imaging of Ethanol/Gasoline Blends in a Direct Injection Spark Ignition Engine , 2013 .

[25]  Silvana Di Iorio,et al.  Characterization of Ethanol Blends Combustion Processes and Soot Formation in a GDI Optical Engine , 2013 .

[26]  P. Aleiferis,et al.  An analysis of spray development with iso-octane, n-pentane, gasoline, ethanol and n-butanol from a multi-hole injector under hot fuel conditions , 2013 .

[27]  Koichiro Aikawa,et al.  Development of a Predictive Model for Gasoline Vehicle Particulate Matter Emissions , 2010 .

[28]  Uwe Wagner,et al.  Investigations of the Formation and Oxidation of Soot Inside a Direct Injection Spark Ignition Engine Using Advanced Laser-Techniques , 2010 .

[29]  C. Rutland,et al.  Investigation into Different DPF Regeneration Strategies Based on Fuel Economy Using Integrated System Simulation , 2009 .

[30]  John E. Dec,et al.  Spectroscopic and chemical-kinetic analysis of the phases of HCCI autoignition and combustion for single- and two-stage ignition fuels , 2008 .

[31]  G. Kalghatgi,et al.  Combustion Imaging and Analysis in a Gasoline Direct Injection Engine , 2004 .

[32]  Dennis L. Siebers,et al.  Effects of Oxygenates on Soot Processes in DI Diesel Engines: Experiments and Numerical Simulations , 2003 .

[33]  Richard R. Steeper,et al.  Piston Wetting in an Optical DISI Engine: Fuel Films, Pool Fires, and Soot Generation , 2001 .

[34]  P. Guthrie.  A Review of Fuel, Intake and Combustion System Deposit Issues Relevant to 4-Stroke Gasoline Direct Fuel Injection Engines , 2001 .

[35]  Stefan Arndt,et al.  Methods and Analysis of Fuel Injection, Mixture Preparation and Charge Stratification in Different Direct Injected SI Engines , 2001 .

[36]  N Ladommatos,et al.  Investigating the effect of oxygenated and aromatic compounds in fuel by comparing laser soot measurements in laminar diffusion flames with diesel engine emissions. , 1999 .

[37]  Akinori Saito,et al.  A Method for Suppressing Formation of Deposits on Fuel Injector for Direct Injection Gasoline Engine , 1999 .

[38]  Allen A. Aradi,et al.  The Effect of Fuel Composition and Engine Operating Parameters on Injector Deposits in a High-Pressure Direct Injection Gasoline (DIG) Research Engine , 1999 .

[39]  Elizabeth A. Schiferl,et al.  A Comparison of Gasoline Direct Injection and Port Fuel Injection Vehicles: Part II - Lubricant Oil Performance and Engine Wear , 1999 .

[40]  H. Ando,et al.  Development of Gasoline Direct Injection Engine , 1997 .

[41]  Shi-wai S. Cheng,et al.  Effect of Engine Operating Parameters on Engine Combustion Chamber Deposits , 1990 .

[42]  R. Wetton,et al.  The Influence of Fuel Hydrogen Content Upon Soot Formation in a Model Gas Turbine Combustor , 1984 .

[43]  Owen I. Smith,et al.  Fundamentals of soot formation in flames with application to diesel engine particulate emissions , 1981 .