The application of supercritical CO2 in nuclear engineering: A review

Due to its advantages of low critical pressure and temperature, stability, non-toxic, abundant reserves and low cost, supercritical CO2 becomes one of the most common supercritical fluids in modern researches and industries. This paper presents an overview focusing on the researches of supercritical CO2 in nuclear engineering and prospects its applications in the field of nuclear industry. This review includes the recent progresses of supercritical CO2 research as: (1) energy conversion material in both recompression cycle and Brayton cycle and its applicability in Generation IV reactors; (2) reactor core coolant in the Echogen power system and reactors at MIT, Kaist and Japan, and other applications, e.g. hydrogen production. Based on the rapid progress of research, the supercritical CO2 is considered to be the most promising material in nuclear industries.

[1]  L. Pan,et al.  Investigation on the performance of the supercritical Brayton cycle with CO2-based binary mixture as working fluid for an energy transportation system of a nuclear reactor , 2015 .

[2]  G. Angelino Carbon Dioxide Condensation Cycles For Power Production , 1968 .

[3]  Rubén Abbas,et al.  Thermal efficiency of direct, inverse and sCO2 gas turbine cycles intended for small power plants , 2016 .

[4]  Seong-O Kim,et al.  DEVELOPMENT OF A SUPERCRITICAL CO2BRAYTON ENERGY CONVERSION SYSTEM COUPLED WITH A SODIUM COOLED FAST REACTOR , 2009 .

[5]  Arash Nemati,et al.  Exergy, economic and environmental impact assessment and optimization of a novel cogeneration system including a gas turbine, a supercritical CO2 and an organic Rankine cycle (GT-HRSG/SCO2) , 2017 .

[6]  Donny Hartanto,et al.  A Conceptual Study of a Supercritical CO 2 -Cooled Micro Modular Reactor , 2015 .

[7]  Jeong-Ik Lee,et al.  Potential advantages of coupling supercritical CO2 Brayton cycle to water cooled small and medium size reactor , 2012 .

[8]  Jeong-Ik Lee,et al.  Supercritical Carbon Dioxide turbomachinery design for water-cooled Small Modular Reactor application , 2014 .

[9]  Jahar Sarkar,et al.  Second law analysis of supercritical CO2 recompression Brayton cycle , 2009 .

[10]  Brian D. Iverson,et al.  Supercritical CO2 Brayton cycles for solar-thermal energy , 2013 .

[11]  Y. Jeong,et al.  Potential improvements of supercritical recompression CO2 Brayton cycle by mixing other gases for power conversion system of a SFR , 2011 .

[12]  Gianfranco Caruso,et al.  Supercritical Carbon Dioxide Applications for Energy Conversion Systems , 2015 .

[13]  F. Charton,et al.  Corrosion Behavior of Different Metallic Materials in Supercritical Carbon Dioxide at 550°C and 250 bars , 2011 .

[14]  Y. Kato,et al.  Medium temperature carbon dioxide gas turbine reactor , 2004 .

[15]  Yann Le Moullec,et al.  Conceptual study of a high efficiency coal-fired power plant with CO2 capture using a supercritical CO2 Brayton cycle , 2013 .

[16]  Mujid S. Kazimi,et al.  Efficiency of hydrogen production systems using alternative nuclear energy technologies , 2006 .

[17]  Seong Gu Kim,et al.  CFD investigation of a centrifugal compressor derived from pump technology for supercritical carbon dioxide as a working fluid , 2014 .

[18]  Seungjoon Baik,et al.  Issues in performance measurement of CO2 compressor near the critical point , 2016 .

[19]  Yiping Dai,et al.  Exergoeconomic analysis of utilizing the transcritical CO2 cycle and the ORC for a recompression supercritical CO2 cycle waste heat recovery: A comparative study , 2016 .

[20]  M. J. Driscoll,et al.  ASSESSMENT OF GAS COOLED FAST REACTOR WITH INDIRECT SUPERCRITICAL CO 2 CYCLE , 2006 .

[21]  E. Feher SUPERCRITICAL THERMODYNAMIC POWER CYCLE. , 1967 .

[22]  Olivier Boutin,et al.  An approach for establishing the performance maps of the sc-CO2 compressor: Development and qualification by means of CFD simulations , 2016 .