Fabrication and Test of LARP Technological Quadrupole Models of TQC Series

In support of the development of a large-aperture Nb3Sn superconducting quadrupole for the Large Hadron Collider (LHC) luminosity upgrade, several two-layer technological quadrupole models of TQC series with 90 mm aperture and collar-based mechanical structure have been developed at Fermilab in collaboration with LBNL. This paper summarizes the results of fabrication and test of TQC02a, the second TQC model based on RRP Nb3Sn strand, and TQC02b, built with both MJR and RRP strand. The test results presented include magnet strain and quench performance during training, as well as quench studies of current ramp rate and temperature dependence from 1.9 K to 4.5 K.

[1]  S. Caspi.  Test Results of LARP Nb3Sn Quadrupole Magnets Using a Shell-based Support Structure (TQS) , 2011 .

[2]  R. Bossert.  Development of TQC01, a 90 mm Nb3 Sn Model Quadrupole for LHC Upgrade Based on SS Collar , 2009 .

[3]  S. Caspi.  Fabrication and Test of TQS01 -- a 90 mm Nb3Sn Quadrupole Magnet for LARP , 2008 .

[4]  G. Sabbi,et al.  Development and Test of LARP Technological Quadrupole Models of TQC Series , 2008, IEEE Transactions on Applied Superconductivity.

[5]  P. Ferracin,et al.  Test and Analysis of Technology Quadrupole Shell (TQS) Magnet Models for LARP , 2008, IEEE Transactions on Applied Superconductivity.

[6]  R. Carcagno,et al.  Development and Test of LARP Technological Quadrupole (TQC) Magnet , 2007, IEEE Transactions on Applied Superconductivity.

[7]  G. Whitson,et al.  Fabrication and Test of TQS01—A 90 mm ${\rm Nb}_{3}{\rm Sn}$ Quadrupole Magnet for LARP , 2007, IEEE Transactions on Applied Superconductivity.

[8]  S. Caspi,et al.  Development of TQC01, a 90 mm$hboxNb_3hbox Sn$Model Quadrupole for LHC Upgrade Based on SS Collar , 2006, IEEE Transactions on Applied Superconductivity.

[9]  S. A. Gourlay,et al.  Magnet R&D for the US LHC Accelerator Research Program (LARP) , 2006 .

[10]  P. Ferracin,et al.  Design and Analysis of TQS01, a 90 mm$hboxNb_3hboxSn$Model Quadrupole for LHC Luminosity Upgrade Based on a Key and Bladder Assembly , 2006, IEEE Transactions on Applied Superconductivity.

[11]  T. Arkan,et al.  Investigation of cable insulation and thermo-mechanical properties of epoxy impregnated Nb/sub 3/Sn composite , 2000, IEEE Transactions on Applied Superconductivity.