Data logging technology in ambulatory medical instrumentation

This paper reviews the advancements made in ambulatory data logging used in the study of human subjects since the inception of the analogue tape based data logger in the 1960s. Research into the area of ambulatory monitoring has been rejuvenated due to the development of novel storage technologies during the 1990s. Data logging systems that were previously impractical due to lack of processing power, practical size and cost are now available to the practitioner. An overview of the requirements of present day ambulatory data logging is presented and analogue tape, solid-state memory and disk drive storage recording systems that have been described in the literature are investigated in detail. It is proposed that digital based technology offers the best solution to the problems encountered during human based data logging. The appearance of novel digital storage media will continue the trend of increased recording durations, signal resolution and number of parameters thus allowing the momentum gained throughout the last several decades to continue.

[1]  Norman J. Holter,et al.  New Method for Heart Studies , 1961, Science.

[2]  G W Petley,et al.  Development and application of a general purpose ambulatory monitor. , 1998, Medical engineering & physics.

[3]  J. Webster,et al.  Development of a three-channel, 24-h ambulatory esophageal pressure monitor , 1989, IEEE Transactions on Biomedical Engineering.

[4]  K R Westerterp,et al.  Assessment of energy expenditure by recording heart rate and body acceleration. , 1989, Medicine and science in sports and exercise.

[5]  J. Bussmann,et al.  Quantification of physical activities by means of ambulatory accelerometry: a validation study. , 1998, Psychophysiology.

[6]  R. Moe-Nilssen,et al.  A new method for evaluating motor control in gait under real-life environmental conditions. Part 1: The instrument. , 1998, Clinical biomechanics.

[7]  J. Fahrenberg,et al.  Assessment of posture and motion by multichannel piezoresistive accelerometer recordings. , 1997, Psychophysiology.

[8]  J. Bussmann,et al.  Ambulatory accelerometry to quantify motor behaviour in patients after failed back surgery: a validation study , 1998, Pain.

[9]  W. Martens,et al.  The fast time frequency transform (F.T.F.T.): A novel on-line approach to the instantaneous spectrum , 1992, 1992 14th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[10]  D. Tepavac,et al.  Microcomputer-based portable long-term spasticity recording system , 1992, IEEE Transactions on Biomedical Engineering.

[11]  Henk J. Stam,et al.  Ambulatory monitoring of mobility-related activities: the initial phase of the development of an activity monitor , 1995 .

[12]  A J Man in 't Veld,et al.  A novel tool to quantify physical activities: ambulatory accelerometry in psychopharmacology. , 1997, Journal of clinical psychopharmacology.

[13]  Roger C. Alford.  The IDE hard disk drive interface , 1991 .

[14]  W.J. Tompkins,et al.  A microprocessor-based data-acquisition system for measuring plantar pressures from ambulatory subjects , 1991, IEEE Transactions on Biomedical Engineering.

[15]  H. Busser,et al.  Ambulatory monitoring of children's activity. , 1997, Medical Engineering and Physics.

[16]  R. Moe-Nilssen,et al.  A new method for evaluating motor control in gait under real-life environmental conditions. Part 2: Gait analysis. , 1998, Clinical biomechanics.

[17]  Friedrich Foerster,et al.  Detection of posture and motion by accelerometry : a validation study in ambulatory monitoring , 1999 .

[18]  R. Moe-Nilssen.  Test-retest reliability of trunk accelerometry during standing and walking. , 1998, Archives of physical medicine and rehabilitation.

[19]  13 Quantifying daily load bearing activity: Results of ground reaction forces measured over a ten hour day , 1997 .

[20]  J. D. Janssen,et al.  A triaxial accelerometer and portable data processing unit for the assessment of daily physical activity , 1997, IEEE Transactions on Biomedical Engineering.