Key building blocks for high-capacity WDM photonic transport networks

The objective of this paper is to give an overview of the different studies we have performed at the research level regarding the design and implementation of a photonic wavelength division multiplexing (WDM) layer providing transparent transport services to client layers (SONET/SDH, ATM, etc.). Such a network requires a number of enabling factors to be assessed in order to become a reality. Among these factors are the availability of high-capacity WDM transmission systems and efficient optical routing nodes based on mature technology, the design of robust networks optimizing the utilization of resources, and the development of a management system in accordance with presently applied standards for transport networks. We review our achievements in these different fields.

[1]  Geert Morthier,et al.  All-optical wavelength converters for optical switching applications. , 1996 .

[2]  Francesco Masetti-Placci,et al.  Routing strategies for optical paths in WDM networks , 1997, Proceedings of ICC'97 - International Conference on Communications.

[3]  Tsong-Ho Wu,et al.  Emerging technologies for fiber network survivability , 1995, IEEE Commun. Mag..

[4]  A. Chraplyvy Limitations on lightwave communications imposed by optical-fiber nonlinearities , 1990 .

[5]  R. Ngo,et al.  Bit error rate assessment of 40 Gbit/s all-optical polarisation independent wavelength converter , 1996 .

[6]  Piet Demeester,et al.  Toward wide-scale all-optical transparent networking: the ACTS optical pan-European network (OPEN) project , 1998, IEEE J. Sel. Areas Commun..

[7]  Charles A. Brackett,et al.  Dense Wavelength Division Multiplexing Networks: Principles and Applications , 1990, IEEE J. Sel. Areas Commun..

[8]  Francesco Masetti,et al.  Design and implementation of a fully reconfigurable all-optical crossconnect for high capacity multiwavelength transport networks , 1996 .

[9]  N. Nagatsu,et al.  Failure restoration in photonic transport networks using optical paths , 1996, Optical Fiber Communications, OFC..

[10]  F. Forghieri Granularity in WDM networks: the role of fiber nonlinearities , 1996, IEEE Photonics Technology Letters.

[11]  Amaury Jourdan,et al.  10 Gbit/s Optically Regenerated NRZ Transmission Experiment over 20,000 kms with 140 km Repeater Spacing , 1998 .

[12]  Dominique Bayart,et al.  320 Gbit/s WDM transmission over 500 km of conventional single-mode fiber with 125-km amplifier spacing , 1997 .

[13]  S. Lacroix,et al.  Optical add/drop multiplexer based on UV-written Bragg grating in a fused 100% coupler , 1997 .

[14]  Thierry Zami,et al.  Fully reconfigurable WDM optical crossconnect: feasibility validation and preparation of prototype crossconnect for ACTS “OPEN” field trials , 1997 .

[15]  P.A. Perrier,et al.  4-channel, 10-Gbit/s capacity self-healing WDM ring network with wavelength add/drop multiplexers , 1996, Optical Fiber Communications, OFC..

[16]  Ioannis G. Tollis,et al.  Techniques for finding ring covers in survivable networks , 1994, 1994 IEEE GLOBECOM. Communications: The Global Bridge.

[17]  Ashish Madhukar Vengsarkar,et al.  1Tb/s Transmission of 100 WDM 10 Gb/s Channels Over 400 km of True WaveTMFiber , 1998 .