Reconfiguration management in manufacturing

Abstract Driven by shorter innovation and product life cycles as well as economic volatility, the demand for reconfiguration of production systems is increasing. Thus, a systematic literature review on reconfiguration management in manufacturing is conducted within this work in order to determine by which degree this is addressed by the literature. To approach this, a definition of reconfiguration management is provided and key aspects of reconfigurable manufacturing systems as well as shortcomings of today’s manufacturing systems reconfiguration are depicted. These provide the basis to derive the requirements for answering the formulated research question. Consequently, the methodical procedure of the literature review is outlined, which is based on the assessment of the derived requirements. Finally, the obtained results are provided and noteworthy insights are given.

[1]  Julia C. Arlinghaus,et al.  Data-driven and autonomous manufacturing control in cyber-physical production systems , 2022, Comput. Ind..

[2]  M. Weyrich,et al.  A Knowledge Graph-Based Method for Automating Systematic Literature Reviews , 2022, KES.

[3]  Julio C. Serrano-Ruiz,et al.  Development of a multidimensional conceptual model for job shop smart manufacturing scheduling from the Industry 4.0 perspective , 2022, Journal of Manufacturing Systems.

[4]  Abdul Salam Khan,et al.  An analysis of the theoretical and implementation aspects of process planning in a reconfigurable manufacturing system , 2022, The International Journal of Advanced Manufacturing Technology.

[5]  Mohammad Amin Yazdani,et al.  Process and production planning for sustainable reconfigurable manufacturing systems (SRMSs): multi-objective exact and heuristic-based approaches , 2022, The International Journal of Advanced Manufacturing Technology.

[6]  Michael Weyrich,et al.  Transfer Learning as an Enhancement for Reconfiguration Management of Cyber-Physical Production Systems , 2021, Procedia CIRP.

[7]  D. Tilbury,et al.  Requirements for Reconfiguration Management for Manufacturing Systems , 2022, IFAC-PapersOnLine.

[8]  A. Verl,et al.  Model-based automatic generation of digital twin models for the simulation of reconfigurable manufacturing systems for timber construction , 2022, Procedia CIRP.

[9]  M. Dahane,et al.  Reconfigurability improvement in Industry 4.0: a hybrid genetic algorithm-based heuristic approach for a co-generation of setup and process plans in a reconfigurable environment , 2021, Journal of Intelligent Manufacturing.

[10]  Nathalie Klement,et al.  Framework for the design and evaluation of a reconfigurable production system based on movable robot integration , 2021, The International Journal of Advanced Manufacturing Technology.

[11]  George Q. Huang,et al.  Production-intralogistics synchronization of industry 4.0 flexible assembly lines under graduation intelligent manufacturing system , 2021 .

[12]  Gaurav Kumar,et al.  Single part reconfigurable flow line design using fuzzy best worst method , 2021, OPSEARCH.

[13]  Benjamin Lindemann,et al.  Enhancing an Intelligent Digital Twin with a Self-organized Reconfiguration Management based on Adaptive Process Models , 2021, Procedia CIRP.

[14]  Xin Chen,et al.  Digital twins-based smart manufacturing system design in Industry 4.0: A review , 2021, Journal of Manufacturing Systems.

[15]  Lyes Benyoucef,et al.  Sustainable reconfigurable manufacturing system design using adapted multi-objective evolutionary-based approaches , 2021, The International Journal of Advanced Manufacturing Technology.

[16]  Ray Y. Zhong,et al.  Synchronization-oriented reconfiguration of FPAI under graduation intelligent manufacturing system in the COVID-19 pandemic and beyond , 2021, Journal of Manufacturing Systems.

[17]  Lazhar Homri,et al.  Modularity-based quality assessment of a disruptive reconfigurable manufacturing system-A hybrid meta-heuristic approach , 2021, The International Journal of Advanced Manufacturing Technology.

[18]  Joanna Daaboul,et al.  An integrated approach to optimize the configuration of mass-customized products and reconfigurable manufacturing systems , 2021, The International Journal of Advanced Manufacturing Technology.

[19]  Pingyu Jiang,et al.  Enhanced agents in shared factory: Enabling high-efficiency self-organization and sustainability of the shared manufacturing resources , 2021 .

[20]  John G. Breslin,et al.  Industry 4.0 smart reconfigurable manufacturing machines , 2021, Journal of Manufacturing Systems.

[21]  Ding Zhang,et al.  Resilience dynamics modeling and control for a reconfigurable electronic assembly line under spatio-temporal disruptions , 2021, Journal of Manufacturing Systems.

[22]  Erkuo Guo,et al.  A digital and structure-adaptive geometric error definition and modeling method of reconfigurable machine tool , 2021 .

[23]  Alexandre Dolgui,et al.  Reconfigurable manufacturing systems from an optimisation perspective: a focused review of literature , 2020, Int. J. Prod. Res..

[24]  E. Mayo-Wilson,et al.  PRISMA 2020 explanation and elaboration: updated guidance and exemplars for reporting systematic reviews , 2020, BMJ.

[25]  J. D. de Sousa,et al.  A new Simulation-Based Approach in the Design of Manufacturing Systems and Real-Time Decision Making , 2021, IFAC-PapersOnLine.

[26]  Améziane Aoussat,et al.  A design methodology for modular processes orchestration , 2021 .

[27]  Nasser Jazdi,et al.  Cyber-physical production systems: enhancement with a self-organized reconfiguration management , 2021 .

[28]  Moacir Godinho Filho,et al.  Smart production planning and control in the Industry 4.0 context: A systematic literature review , 2020, Comput. Ind. Eng..

[29]  Anna Syberfeldt,et al.  On a containerized approach for the dynamic planning and control of a cyber - physical production system , 2020, Robotics Comput. Integr. Manuf..

[30]  Aydin Nassehi,et al.  Anarchic manufacturing: Distributed control for product transition , 2020, Journal of Manufacturing Systems.

[31]  Chaoyang Zhang,et al.  Digital twin-driven rapid reconfiguration of the automated manufacturing system via an open architecture model , 2020, Robotics Comput. Integr. Manuf..

[32]  Reza Tavakkoli-Moghaddam,et al.  Flexible job shop scheduling problem with reconfigurable machine tools: An improved differential evolution algorithm , 2020, Appl. Soft Comput..

[33]  Lyes Benyoucef,et al.  A heuristic-based non-linear mixed integer approach for optimizing modularity and integrability in a sustainable reconfigurable manufacturing environment , 2020, The International Journal of Advanced Manufacturing Technology.

[34]  Birgit Vogel-Heuser,et al.  Interdisciplinary engineering of cyber-physical production systems: highlighting the benefits of a combined interdisciplinary modelling approach on the basis of an industrial case , 2020, Design Science.

[35]  Hyun Woo Jeon,et al.  Minimizing total energy cost and tardiness penalty for a scheduling-layout problem in a flexible job shop system: A comparison of four metaheuristic algorithms , 2020, Comput. Ind. Eng..

[36]  Hendrik Simon,et al.  Formale Methoden für rekonfigurierbare cyber-physische Systeme in der Produktion , 2019, Autom..

[37]  M. Macchi,et al.  Local Decision Making based on Distributed Digital Twin Framework , 2020, IFAC-PapersOnLine.

[38]  K. Salonitis,et al.  Reconfigurable Manufacturing Systems Characteristics in Digital Twin Context , 2020, IFAC-PapersOnLine.

[39]  Johannes Schilp,et al.  Production planning for collaborating resources in cyber-physical production systems , 2020 .

[40]  Aydin Nassehi,et al.  Self-repair of smart manufacturing systems by deep reinforcement learning , 2020, CIRP Annals.

[41]  Marco Bortolini,et al.  Reconfigurability in cellular manufacturing systems: a design model and multi-scenario analysis , 2019, The International Journal of Advanced Manufacturing Technology.

[42]  Lei Yue,et al.  Automated flexible transfer line design problem: Sequential and reconfigurable stages with parallel machining cells , 2019, Journal of Manufacturing Systems.

[43]  Lyes Benyoucef,et al.  Machine layout design problem under product family evolution in reconfigurable manufacturing environment: a two-phase-based AMOSA approach , 2019, The International Journal of Advanced Manufacturing Technology.

[44]  Stefania Pellegrinelli,et al.  Configuration and reconfiguration of robotic systems for waste macro sorting , 2019, The International Journal of Advanced Manufacturing Technology.

[45]  Yu-Ju Lin,et al.  Knowledge Reasoning for Intelligent Manufacturing Control System , 2019, Procedia Manufacturing.

[46]  Maurizio Faccio,et al.  Toward a Real-Time Reconfiguration of Self-Adaptive Smart Assembly Systems , 2019, Procedia Manufacturing.

[47]  Martin Ruskowski,et al.  Self-description of Cyber-Physical Production Modules for a product-driven manufacturing system , 2019, Procedia Manufacturing.

[48]  Michael Nieke,et al.  Context-sensitive reconfiguration of collaborative manufacturing systems , 2019, IFAC-PapersOnLine.

[49]  Roland Rosen,et al.  Reconfiguration of production systems using optimization and material flow simulation , 2019, Procedia CIRP.

[50]  Moncef Hammadi,et al.  Generic Framework for Holonic Modelling and Multi-Agent Based Verification of Reconfigurable Manufacturing Systems , 2018, International Journal of Precision Engineering and Manufacturing.

[51]  Thomas Greiner,et al.  Dynamic reconfiguration of service-oriented resources in cyber-physical production systems by a process-independent approach with multiple criteria and multiple resource management operations , 2018, Future Gener. Comput. Syst..

[52]  Avinash Kumar,et al.  Optimal sequence planning for multi-model reconfigurable assembly systems , 2018, The International Journal of Advanced Manufacturing Technology.

[53]  Marco Bortolini,et al.  Reconfigurable manufacturing systems: Literature review and research trend , 2018, Journal of Manufacturing Systems.

[54]  Nelson Rodrigues,et al.  Decentralized and on-the-fly agent-based service reconfiguration in manufacturing systems , 2018, Comput. Ind..

[55]  Michael Weyrich,et al.  A systematic approach for supporting the adaptation process of discrete manufacturing machines , 2018, Research in Engineering Design.

[56]  Masood Ashraf,et al.  Configuration selection for a reconfigurable manufacturing flow line involving part production with operation constraints , 2018, The International Journal of Advanced Manufacturing Technology.

[57]  Pekka Aarnio,et al.  Automatic assembly planning based on digital product descriptions , 2018, Comput. Ind..

[58]  Lazhar Homri,et al.  Optimum machine capabilities for reconfigurable manufacturing systems , 2018 .

[59]  Mohammed Dahane,et al.  Modularity assessment in reconfigurable manufacturing system (RMS) design: an Archived Multi-Objective Simulated Annealing-based approach , 2018 .

[60]  Piyush Gupta,et al.  Reconfigurable manufacturing systems: journey and the road ahead , 2017, Int. J. Syst. Assur. Eng. Manag..

[61]  Gunther Reinhart,et al.  Knowledge-Based Decision Making in a Cyber-Physical Production Scenario , 2017 .

[62]  Eeva Järvenpää,et al.  Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems , 2017 .

[63]  Detlef Zühlke,et al.  Future Modeling and Simulation of CPS-based Factories: an Example from the Automotive Industry , 2016 .

[64]  Jay Lee,et al.  Cyber-physical Systems Architecture for Self-Aware Machines in Industry 4.0 Environment , 2015 .

[65]  László Monostori,et al.  ScienceDirect Variety Management in Manufacturing . Proceedings of the 47 th CIRP Conference on Manufacturing Systems Cyber-physical production systems : Roots , expectations and R & D challenges , 2014 .