Active frequency tuning for micro resonators by localized thermal stressing effects

A method of active frequency tuning on comb-shape micro resonators has been successfully demonstrated by means of localized stressing effects. A mechanical beam structure that can be resistively heated to generate thermal stress, is integrated as part of the comb-shape micro resonator for frequency tuning. Experimentally, a frequency change up to 6.5% is measured for resonators with a central frequency at around 31 kHz. The required tuning power is 25 mW in the form of localized Joule heating. Analytically, both a one-dimensional electrothermal model and a dynamic model are established to characterize the electrical, thermal and frequency responses of active frequency tuning. The simulation results of frequency spectrum are consistent with experimental measurements. A reliability test, conducted for more than 300 million cycles under 6.5% of frequency tuning range, reveals no observable material damages on the micro resonator. This scheme enables active frequency tuning under low power consumption and independent of the input/output function of a micro resonator. As such, it has potential applications to resonator-based MEMS devices, such as rate gyroscopes and microelectromechanical filters.

[1]  Young-Ho Cho,et al.  A triangular electrostatic comb array for micromechanical resonant frequency tuning , 1998 .

[2]  Christopher C. T. Nguyen,et al.  High-order micromechanical electronic filters , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[3]  Cam Nguyen,et al.  Frequency trimming and Q-factor enhancement of micromechanical resonators via localized filament annealing , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[4]  Y. Oh,et al.  A surface-micromachined tunable vibratory gyroscope , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[5]  William C. Tang,et al.  Laterally driven polysilicon resonant microstructures , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[6]  Noel C. MacDonald,et al.  Independent tuning of linear and nonlinear stiffness coefficients [actuators] , 1998 .

[7]  Y. Mochida,et al.  A micromachined vibrating gyroscope , 1995 .

[8]  T. A. Roessig,et al.  Surface-micromachined resonant accelerometer , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[9]  Miko Elwenspoek,et al.  Nonlinearity and Hysteresis of Resonant Strain Gauges , 1998 .

[10]  Mu Chiao,et al.  Electrothermal responses of lineshape microstructures , 1996 .

[11]  Miko Elwenspoek,et al.  Micro resonant force gauges , 1992 .

[12]  Van P. Carey,et al.  Thermal bubble formation on polysilicon micro resistors , 1998 .

[13]  Richard R. A. Syms,et al.  Electrothermal frequency tuning of folded and coupled vibrating micromechanical resonators , 1998 .

[14]  R. Legtenberg,et al.  Nonlinearity and hysteresis of resonant strain gauges , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[15]  C. Nguyen,et al.  Frequency-selective MEMS for miniaturized low-power communication devices , 1999 .

[16]  Independent Tuning of Linear and , 1998 .

[17]  Richard R. A. Syms,et al.  Focused ion beam tuning of in-plane vibrating micromechanical resonators , 1999 .

[18]  Noel C. MacDonald,et al.  A micromachined, single-crystal silicon, tunable resonator , 1995 .

[19]  R. Howe,et al.  Microelectromechanical filters for signal processing , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[20]  Y. Omura,et al.  New resonant accelerometer based on rigidity change , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[21]  R. Howe,et al.  Micromechanical structures for thin film characterization , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[22]  Noel C. MacDonald,et al.  Capacitance based tunable resonators , 1998 .

[23]  Michael A. Huff,et al.  Heating Effects on The Young's Modulus of Films Sputtered onto Micromachined Resonators , 1998 .

[24]  M. Esashi,et al.  Fine frequency tuning in resonant sensors , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.