Copper biosorption using local Iraqi natural agents

AbstractIndustrial effluents loaded with heavy metals are a cause of hazards to the humans and other forms of life. Conventional approaches, such as electroplating, ion exchange, and membrane processes, are used for removal of copper, cadmium, and lead and are often cost prohibitive with low efficiency at low metal ion concentration. Biosorption can be considered as an option which has been proven as more efficient and economical for removing the mentioned metal ions. Biosorbents used are fungi, yeasts, oil palm shells, coir pith carbon, peanut husks, and olive pulp. Recently, low cost and natural products have also been researched as biosorbent. This paper presents an attempt of the potential use of Iraqi date pits and Al-Khriet (i.e. substances locally available in Iraq and found in the legs of Typha domingensis) as basements. The important factors studied which affect the removal of copper ion are solution pH value (4–8), adsorbent dosage (0.5–2 g), contact time [((1/2–4) h) for Al-Khriet and (1/2–24) ...

[1]  Nada S. Ahmedzeki Adsorption filtration technology using iron-coated sand for the removal of lead and cadmium ions from aquatic solutions , 2013 .

[2]  Tariq J. Al-Musawi,et al.  Removal of Lead, Cadmium, and Mercury Ions Using Biosorption , 2010 .

[3]  O. Onukwuli,et al.  Lead removal from wastewater using fluted pumpkin seed shell activated carbon: Adsorption modeling and kinetics , 2010 .

[4]  N. Das,et al.  Screening of natural waste products for the removal of Cr (VI) ions from industrial effluents. , 2010 .

[5]  J. M. Park,et al.  Removal of cadmium using acid-treated activated carbon in the presence of nonionic and/or anionic surfactants , 2009 .

[6]  B. Hameed,et al.  Adsorption isotherm and kinetic modeling of 2,4-D pesticide on activated carbon derived from date stones. , 2009, Journal of hazardous materials.

[7]  N. Abdel-Ghani,et al.  Typha domingensis leaf powder for decontamination of aluminium, iron, zinc and lead: Biosorption kinetics and equilibrium modeling , 2009 .

[8]  N. Amin,et al.  Removal of lead (II) and copper (II) from aqueous solution using pomegranate peel as a new adsorbent , 2008 .

[9]  Dhiraj Sud,et al.  Removal of nickel(II) from aqueous solution by adsorption on agricultural waste biomass using a response surface methodological approach. , 2008, Bioresource technology.

[10]  A. H. Sulaymon,et al.  Competitive adsorption of furfural and phenolic compounds onto activated carbon in fixed bed column. , 2008, Environmental science & technology.

[11]  N. Choudary,et al.  Activated carbon from Ceiba pentandra hulls, an agricultural waste, as an adsorbent in the removal of lead and zinc from aqueous solutions. , 2008, Waste management.

[12]  Z. Eren,et al.  Removal of Cu(II) ions by activated poplar sawdust (Samsun clone) from aqueous solutions. , 2006, Journal of hazardous materials.

[13]  A. Saeed,et al.  Removal and recovery of heavy metals from aqueous solution using papaya wood as a new biosorbent , 2005 .

[14]  R. Khalkhali,et al.  Adsorption of Mercuric Ion from Aqueous Solutions Using Activated Carbon , 2005 .

[15]  P. Vasudevan,et al.  Kinetics of biosorption of cadmium on Baker's yeast. , 2003, Bioresource technology.

[16]  H. Elliott,et al.  Adsorption characteristics of some Cu(II) complexes on aluminosilicates , 1981 .

[17]  R. Murray,et al.  Sites of metal deposition in the cell wall of Bacillus subtilis , 1980, Journal of bacteriology.