Macromolecular coupling agents for flame retardant materials

[1]  R. Joseph,et al.  Effect of morphological features and surface area of hydroxyapatite on the fatigue behavior of hydroxyapatite-polyethylene composites. , 2005, Biomacromolecules.

[2]  F. Stedile,et al.  Free radical modification of LDPE with vinyltriethoxysilane , 2004 .

[3]  A. Richard Horrocks,et al.  A review of flame retardant polypropylene fibres , 2003 .

[4]  K. Mai,et al.  Mechanical properties of Mg(OH)2/polypropylene composites modified by functionalized polypropylene , 2003 .

[5]  Jukka Seppälä,et al.  Compatibilization of polyethylene/aluminum hydroxide (PE/ATH) and polyethylene/magnesium hydroxide (PE/MH) composites with functionalized polyethylenes , 2003 .

[6]  T. R. Hull,et al.  An investigation into the decomposition and burning behaviour of ethylene-vinyl acetate copolymer nanocomposite materials , 2003 .

[7]  P. Chini,et al.  Flame retardants for polypropylene based on lignin , 2003 .

[8]  P. Jiang,et al.  Interface modification and characterization in linear low-density polyethylene highly loaded with aluminium hydroxide , 2002 .

[9]  J. Nam,et al.  Thermo‐oxidative stability study of polypropylene composites by using cone calorimetry and thermogravimetry , 2002 .

[10]  Zhengjun Li,et al.  Interfacial interaction in AI(OH)3/polypropylene composites modified by insitu‐functionalized polypropylene , 2002 .

[11]  Zhengjun Li,et al.  Physical and mechanical properties of Al(OH)3/polypropylene composites modified by in situ-functionalized polypropylene , 2002 .

[12]  Jinhai Yang,et al.  Mechanical properties and microstructure of HDPE/AL(OH)3/silicone oil composite , 2002 .

[13]  J. Saja,et al.  The effect of filler type, morphology and coating on the anisotropy and microstructure heterogeneity of injection-moulded discs of polypropylene filled with aluminium and magnesium hydroxides. Part 2. Thermal and dynamic mechanical properties , 2002 .

[14]  J. Gallo,et al.  Flame retardancy in thermoplastic polyurethane elastomers (TPU) with mica and aluminum trihydrate (ATH) , 2000 .

[15]  J. Jang,et al.  The effect of flame retardants on the flammability and mechanical properties of paper-sludge/phenolic composite , 2000 .

[16]  K. Suh,et al.  Effects of particle size of Al(OH)3 on electrical properties of EPDM compounds , 2000 .

[17]  F. Stedile,et al.  Polypropylene functionalization with vinyltriethoxysilane , 1999 .

[18]  R. S. Mauler,et al.  A factorial design applied to polypropylene functionalization with maleic anhydride , 1999 .

[19]  Yeong-Tarng Shieh,et al.  Thermal properties of silane-grafted water-crosslinked polyethylene , 1998 .

[20]  J. Harper,et al.  The influence of magnesium hydroxide morphology on the crystallinity and properties of filled polypropylene , 1998 .

[21]  J. A. M. Agnelli,et al.  Aspectos do comportamento de polímeros em condições de incêndio , 1998 .

[22]  S. Ali,et al.  Effect of silane-based filler surface treatment formulation on the interfacial properties of impact modified polypropylene/magnesium hydroxide composites , 1998 .

[23]  P. Dubois,et al.  Polyolefin-Based Composites by Polymerization-Filling Technique , 1998 .

[24]  A. Benhassaine,et al.  Fire resistance and mechanical properties of a huntite/hydromagnesite/antimony trioxide/decabromodiphenyl oxide filled PP-PE copolymer , 1996 .

[25]  P. Hornsby,et al.  Interfacial modification of polypropylene composites filled with magnesium hydroxide , 1995, Journal of Materials Science.

[26]  C. Liauw,et al.  The effect of filler surface modification on the mechanical properties of aluminium hydroxide filled polypropylene , 1995 .

[27]  J. Yeh,et al.  Combustion of polyethylene filled with metallic hydroxides and crosslinkable polyethylene , 1995 .

[28]  Shigeo Miyata,et al.  Fire‐retarding polypropylene with magnesium hydroxide , 1980 .