Effects of copper and manganese cations on cerium-based conversion coating on galvanized steel: Corrosion resistance and microstructure characterizations

[1]  Mohammadhassan Badihehaghdam,et al.  Mechanical Properties and Electrochemical Behavior of Electroless Ni–P-AlN Nanocomposite Coating , 2021, Metals and Materials International.

[2]  S. Mousavian,et al.  Effects of zirconium addition on electrochemical and mechanical properties of Mg-3Zn-1Ca-1RE alloy , 2020 .

[3]  A. Dastgheib,et al.  Evaluation of Corrosion Inhibition of Mild Steel in 3.5 wt% NaCl Solution by Cerium Nitrate , 2019, Metals and Materials International.

[4]  A. Sarabi,et al.  Comparative investigation of Cu ion and adipic acid addition on electrochemical and microstructure characteristics of vanadium conversion coating on AZ31 Mg alloy , 2019, Surface and Coatings Technology.

[5]  B. Ramezanzadeh,et al.  Effects of combined organic and inorganic corrosion inhibitors on the nanostructure cerium based conversion coating performance on AZ31 magnesium alloy: Morphological and corrosion studies , 2017 .

[6]  D. Thierry,et al.  Corrosion and corrosion products of hot dipped galvanized steel during long term atmospheric exposure at different sites world-wide , 2017 .

[7]  L. Yuping,et al.  Neodymium-based Conversion Coating on AZ31 Magnesium Alloy , 2017 .

[8]  A. Sarabi,et al.  Titanium-phytic acid nano structured conversion coating formation on CRS substrate , 2016 .

[9]  S. Saidman,et al.  Formation of a cerium conversion coating on magnesium alloy using ascorbic acid as additive. Characterisation and anticorrosive properties of the formed films , 2016 .

[10]  B. Ramezanzadeh,et al.  Improved performance of cerium conversion coatings on steel with zinc phosphate post-treatment , 2015 .

[11]  X. Ren,et al.  Cerium-based Chemical Conversion Coating on Aluminum Alloy to Inhibits Corrosion in Chloride Solution , 2015, International Journal of Electrochemical Science.

[12]  Chun-shan Che,et al.  Growth behavior of lanthanum conversion coating on hot-dip galvanized steel , 2014 .

[13]  R. Hosseini,et al.  The performance improvement of Zr conversion coating through Mn incorporation: With and without organic coating , 2014 .

[14]  R. Hosseini,et al.  A comprehensive study of the green hexafluorozirconic acid-based conversion coating , 2014 .

[15]  B. Ramezanzadeh,et al.  Studying corrosion performance, microstructure and adhesion properties of a room temperature zinc phosphate conversion coating containing Mn2 + on mild steel , 2013 .

[16]  M. Giza,et al.  Formation and characterization of Fe3+-/Cu2+-modified zirconium oxide conversion layers on zinc alloy coated steel sheets , 2013 .

[17]  B. Ramezanzadeh,et al.  Effects of Co(II) and Ni(II) on the Surface Morphology and Anticorrosion Performance of the Steel Samples Pretreated by Cr(III) Conversion Coating , 2012 .

[18]  B. Ramezanzadeh,et al.  Corrosion performance of a hot-dip galvanized steel treated by different kinds of conversion coatings , 2010 .

[19]  M. Arenas,et al.  Influence of the conversion coating on the corrosion of galvanized reinforcing steel , 2006 .

[20]  G. Frankel,et al.  Effect of Copper Content on Chromate Conversion Coating Protection of 7xxx-T6 Aluminum Alloys , October 2004 , 2004 .

[21]  I. Chen,et al.  Reactive Cerium(IV) Oxide Powders by the Homogeneous Precipitation Method , 1993 .