Assessment of Wooded Area Reduction by Airborne Laser Scanning

Airborne Laser Scanning (ALS) data hold a great deal of promise in monitoring the reduction of single trees and forests with high accuracy. In the literature, the canopy height model (CHM) is the main input used frequently for forest change detection. ALS also has the key capability of delivering 3D point clouds, not only from the top canopy surface, but also from the entire canopy profile and also from the terrain. We investigated the use of two additional parameters, which exploit these capabilities for assessing the reduction of wooded area: Slope-adapted echo ratio (sER) and Sigma0. In this study, two ALS point cloud data sets (2005 and 2011) were used to calculate Digital Surface Model (DSM), sER, and Sigma0 in 1.5 km2 forest area in Vorarlberg, Austria. Image differencing was applied to indicate the change in the three difference models individually and in their combinations. Decision trees were used to classify the area of removed trees with the minimum mapping unit of 13 m2. The final results were evaluated by a knowledge-based manual digitization using completeness and correctness measures. The best result is achieved using the combination of sER and DSM, namely a correctness of 92% and a completeness of 85%.

[1]  Norbert Pfeifer,et al.  Delineation of Tree Crowns and Tree Species Classification From Full-Waveform Airborne Laser Scanning Data Using 3-D Ellipsoidal Clustering , 2014, IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing.

[2]  Markus Hollaus,et al.  Growing stock estimation for alpine forests in Austria: a robust lidar-based approach , 2009 .

[3]  Matthew C. Hansen,et al.  Remotely sensed forest cover loss shows high spatial and temporal variation across Sumatera and Kalimantan, Indonesia 2000–2008 , 2011 .

[4]  Markus Holopainen,et al.  Mapping of snow-damaged trees based on bitemporal airborne LiDAR data , 2011, European Journal of Forest Research.

[5]  Johan Holmgren,et al.  Detection of windthrown trees using airborne laser scanning , 2014, Int. J. Appl. Earth Obs. Geoinformation.

[6]  Stephen V. Stehman,et al.  Combining MODIS and Landsat imagery to estimate and map boreal forest cover loss , 2008 .

[7]  W. Wagner,et al.  Accuracy of large-scale canopy heights derived from LiDAR data under operational constraints in a complex alpine environment , 2006 .

[8]  Pete Watt,et al.  An evaluation of the use of satellite data for monitoring early development of young Sitka spruce plantation forest growth , 2004 .

[9]  Lars T. Waser,et al.  High‐quality image matching and automated generation of 3D tree models , 2008 .

[10]  Markus Hollaus,et al.  LAND COVER DEPENDENT DERIVATION OF DIGITAL SURFACE MODELS FROM AIRBORNE LASER SCANNING DATA , 2010 .

[11]  Jörgen Wallerman,et al.  Forest variable estimation using photogrammetric matching of digital aerial images in combination with a high-resolution DEM , 2012 .

[12]  Markus Hollaus,et al.  Detection of lying tree stems from airborne laser scanning data using a line template matching algorithm , 2013 .

[13]  Martin Rutzinger,et al.  Estimation of Aboveground Biomass in Alpine Forests: A Semi-Empirical Approach Considering Canopy Transparency Derived from Airborne LiDAR Data , 2010, Sensors.

[14]  Joanne C. White,et al.  The Utility of Image-Based Point Clouds for Forest Inventory: A Comparison with Airborne Laser Scanning , 2013 .

[15]  Norbert Pfeifer,et al.  Georeferenced Point Clouds: A Survey of Features and Point Cloud Management , 2013, ISPRS Int. J. Geo Inf..

[16]  M. Hodgson,et al.  An evaluation of LIDAR- and IFSAR-derived digital elevation models in leaf-on conditions with USGS Level 1 and Level 2 DEMs , 2003 .

[17]  Robert J. Gurney,et al.  Measurement of canopy geometry characteristics using LiDAR laser altimetry: a feasibility study , 2005, IEEE Transactions on Geoscience and Remote Sensing.

[18]  George Vosselman,et al.  3 D RECONSTRUCTION OF ROADS AND TREES FOR CITY MODELLING , 2003 .

[19]  George Vosselman,et al.  Tree modelling from mobile laser scanning data‐sets , 2011 .

[20]  Mark A. Friedl,et al.  Distance metric-based forest cover change detection using MODIS time series , 2014, Int. J. Appl. Earth Obs. Geoinformation.

[21]  Markus Hollaus,et al.  Object-Based Point Cloud Analysis of Full-Waveform Airborne Laser Scanning Data for Urban Vegetation Classification , 2008, Sensors.

[22]  Doo-Ahn Kwak,et al.  Estimation of carbon storage based on individual tree detection in Pinus densiflora stands using a fusion of aerial photography and LiDAR data , 2010, Science China Life Sciences.

[23]  Benoît St-Onge,et al.  Spatially explicit characterization of boreal forest gap dynamics using multi-temporal lidar data , 2008 .

[24]  J. Hyyppä,et al.  Automatic detection of harvested trees and determination of forest growth using airborne laser scanning , 2004 .

[25]  J. Holmgren,et al.  Change detection of mountain birch using multi-temporal ALS point clouds , 2013 .

[26]  A. Trémeau,et al.  International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives , 2013 .

[27]  Dongmei Chen,et al.  Change detection from remotely sensed images: From pixel-based to object-based approaches , 2013 .

[28]  Ute Beyer,et al.  Remote Sensing And Image Interpretation , 2016 .

[29]  F. Ackermann.  Airborne laser scanning : present status and future expectations , 1999 .

[30]  Terje Gobakken,et al.  Estimating forest growth using canopy metrics derived from airborne laser scanner data , 2005 .

[31]  Norbert Pfeifer,et al.  OPALS - A framework for Airborne Laser Scanning data analysis , 2014, Comput. Environ. Urban Syst..

[32]  J. Hyyppä,et al.  Change Detection Techniques for Canopy Height Growth Measurements Using Airborne Laser Scanner Data , 2006 .