Stiction problems in releasing of 3D microstructures and its solution

Micro-stereolithography (μSL) is capable of fabrication of highly complex three-dimensional (3D) microstructures by selectively photo-induced polymerization from the monomer resin. However, during the evaporative drying of structures from liquid resin, the 3D microstructures often collapse due to the capillary force. In this work, a theoretical model is developed to analyze the deflection and adhesion between thin polymer beams under capillary force. The detachment length of the test structures and adhesion energy of a typical μSL polymer (HDDA) are obtained experimentally which are important for MEMS structure design. Finally, we successfully developed a sublimation process to release the 3D microstructures without the adhesion.

[1]  Cheng Sun,et al.  Micro-stereolithography of polymeric and ceramic microstructures , 1999 .

[2]  Nicholas X. Fang,et al.  Polymeric micromechanical components with tunable stiffness , 2001 .

[3]  K. Ikuta,et al.  Real three dimensional micro fabrication using stereo lithography and metal molding , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[4]  R. J. Collins,et al.  Performance impact of monolayer coating of polysilicon micromotors , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[5]  藤正 巌,et al.  IEEE Micro Electro Mechanical Systems Workshop. , 1989 .

[6]  Xiaoning Jiang,et al.  Microstereolithography of lead zirconate titanate thick film on silicon substrate , 2000 .

[7]  Chang-Jin Kim,et al.  Comparative evaluation of drying techniques for surface micromachining , 1998 .

[8]  N. Fang,et al.  Adhesion force of polymeric three-dimensional microstructures fabricated by microstereolithography , 2002 .

[9]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. II. Experiments , 1993 .

[10]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory , 1993 .

[11]  K. Ikuta,et al.  Submicron stereolithography for the production of freely movable mechanisms by using single-photon polymerization , 2002 .

[12]  J. J. Sniegowski,et al.  Advances in processing techniques for silicon micromechanical devices with smooth surfaces , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[13]  Satoshi Kawata,et al.  Finer features for functional microdevices , 2001, Nature.