Overcoming Microstructural Limitations in Water Processed Organic Solar Cells by Engineering Customized Nanoparticulate Inks

The application of conjugated polymer and fullerene water‐based nanoparticles (NP) as ecofriendly inks for organic photovoltaics (OPVs) is reported. A low bandgap polymer diketopyrrolopyrrole–quinquethiophene (PDPP5T‐2) and the methanofullerene PC71BM are processed into three types of nanoparticles: pristine fullerene NPs, pristine polymer NPs, and mixed polymer:fullerene NPs, allowing the formation of bulk heterojunction (BHJ) composites with different domain sizes. Mild thermal annealing is required to melt the nanospheres and enable the formation of interconnected pathways within mixed phases. This BHJ is accompanied by a shrinkage of film, whereas the more compact layers show enhanced mobility. Consistently reduced recombination and better performance are found for mixed NP, containing both, the polymer and the fullerene within a single NP. The optimized solar cell processed by ultrasmall NPs delivers a power conversion efficiency of about 3.4%. This is among the highest values reported for aqueous processed OPVs but still lacks performance compared to those being processed from halogenated solvents. Incomplete crystallization is identified as the main root for reduced efficiency. It is nevertheless believed that postprocessing does not cut attraction from printing aqueous organic NP inks as a trendsetting strategy for the reliable and ecofriendly production of organic solar cells.

[1]  Haiying Shen,et al.  TOP , 2019, Encyclopedia of Autism Spectrum Disorders.

[2]  Nathan A. Cooling,et al.  The origin of performance limitations in miniemulsion nanoparticulate organic photovoltaic devices , 2018 .

[3]  H. Yao,et al.  Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell. , 2017, Journal of the American Chemical Society.

[4]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[5]  M. Wienk,et al.  Aqueous Nanoparticle Polymer Solar Cells: Effects of Surfactant Concentration and Processing on Device Performance , 2017, ACS applied materials & interfaces.

[6]  Jean Manca,et al.  Eco-friendly fabrication of PBDTTPD:PC71BM solar cells reaching a PCE of 3.8% using water-based nanoparticle dispersions , 2017 .

[7]  Christoph J. Brabec,et al.  Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing , 2017, Nature Communications.

[8]  C. Brabec,et al.  Overcoming the Thermal Instability of Efficient Polymer Solar Cells by Employing Novel Fullerene‐Based Acceptors , 2017 .

[9]  Yuekun Lai,et al.  A review on special wettability textiles: theoretical models, fabrication technologies and multifunctional applications , 2017 .

[10]  K. Arlauskas,et al.  Mini‐review: Charge Transport and its Characterisation using Photo‐CELIV in Bulk‐Heterojunction Solar Cells , 2016 .

[11]  Yongfang Li,et al.  10.8% Efficiency Polymer Solar Cells Based on PTB7‐Th and PC71BM via Binary Solvent Additives Treatment , 2016 .

[12]  Xiaojing Zhou,et al.  Engineering vertical morphology with nanoparticulate organic photovoltaic devices , 2016 .

[13]  Weiwei Li,et al.  Diketopyrrolopyrrole Polymers for Organic Solar Cells. , 2016, Accounts of chemical research.

[14]  Mats Andersson,et al.  Nano-pathways: Bridging the divide between water-processable nanoparticulate and bulk heterojunction organic photovoltaics , 2016 .

[15]  H. Ade,et al.  Manipulating Aggregation and Molecular Orientation in All‐Polymer Photovoltaic Cells , 2015, Advanced materials.

[16]  Yun‐Hi Kim,et al.  High Charge‐Carrier Mobility of 2.5 cm2 V−1 s−1 from a Water‐Borne Colloid of a Polymeric Semiconductor via Smart Surfactant Engineering , 2015, Advanced materials.

[17]  Christoph J. Brabec,et al.  Effects of Alkyl Terminal Chains on Morphology, Charge Generation, Transport, and Recombination Mechanisms in Solution‐Processed Small Molecule Bulk Heterojunction Solar Cells , 2015 .

[18]  C. Brabec,et al.  Photophysics of Molecular‐Weight‐Induced Losses in Indacenodithienothiophene‐Based Solar Cells , 2015 .

[19]  Jianqi Zhang,et al.  Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells. , 2015, Journal of the American Chemical Society.

[20]  Juliane Kniepert,et al.  Effect of Solvent Additive on Generation, Recombination, and Extraction in PTB7:PCBM Solar Cells: A Conclusive Experimental and Numerical Simulation Study , 2015 .

[21]  Weiwei Li,et al.  A real-time study of the benefits of co-solvents in polymer solar cell processing , 2015, Nature Communications.

[22]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[23]  M. Turbiez,et al.  Charge transport and recombination in PDPP5T:[70]PCBM organic solar cells: The influence of morphology , 2014 .

[24]  Alexander Colsmann,et al.  Eco‐Friendly Fabrication of 4% Efficient Organic Solar Cells from Surfactant‐Free P3HT:ICBA Nanoparticle Dispersions , 2014, Advanced materials.

[25]  T. Russell,et al.  Multiscale active layer morphologies for organic photovoltaics through self-assembly of nanospheres. , 2014, Nano letters.

[26]  Christopher M. Proctor,et al.  Overcoming Geminate Recombination and Enhancing Extraction in Solution‐Processed Small Molecule Solar Cells , 2014 .

[27]  Zhenan Bao,et al.  Morphology control strategies for solution-processed organic semiconductor thin films , 2014 .

[28]  Guillermo C Bazan,et al.  Bulk heterojunction solar cells: morphology and performance relationships. , 2014, Chemical reviews.

[29]  Wei You,et al.  The influence of molecular orientation on organic bulk heterojunction solar cells , 2014, Nature Photonics.

[30]  Yiwang Chen,et al.  Self-Assembled Conjugated Polyelectrolyte–Ionic Liquid Crystal Complex as an Interlayer for Polymer Solar Cells: Achieving Performance Enhancement via Rapid Liquid Crystal-Induced Dipole Orientation , 2014 .

[31]  P. Sonar,et al.  Water-based nanoparticulate solar cells using a diketopyrrolopyrrole donor polymer. , 2014, Physical chemistry chemical physics : PCCP.

[32]  Paul C. Dastoor,et al.  Nano-domain behaviour in P3HT:PCBM nanoparticles, relating material properties to morphological changes , 2013 .

[33]  Robert P. H. Chang,et al.  Polymer solar cells with enhanced fill factors , 2013, Nature Photonics.

[34]  Xiaojing Zhou,et al.  The role of miscibility in polymer:fullerene nanoparticulate organic photovoltaic devices , 2013 .

[35]  Dieter Neher,et al.  Nongeminate Recombination and Charge Transport Limitations in Diketopyrrolopyrrole‐Based Solution‐Processed Small Molecule Solar Cells , 2013 .

[36]  Kerry B. Burke,et al.  Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices , 2013 .

[37]  P. Blom,et al.  Identifying the Nature of Charge Recombination in Organic Solar Cells from Charge‐Transfer State Electroluminescence , 2012 .

[38]  Weiwei Li,et al.  Enhancing the photocurrent in diketopyrrolopyrrole-based polymer solar cells via energy level control. , 2012, Journal of the American Chemical Society.

[39]  M. Kaltenbrunner,et al.  Ultrathin and lightweight organic solar cells with high flexibility , 2012, Nature Communications.

[40]  Alan J. Heeger,et al.  Charge Formation, Recombination, and Sweep‐Out Dynamics in Organic Solar Cells , 2012 .

[41]  Steve Albrecht,et al.  On the Field Dependence of Free Charge Carrier Generation and Recombination in Blends of PCPDTBT/PC70BM: Influence of Solvent Additives. , 2012, The journal of physical chemistry letters.

[42]  Zhe Li,et al.  Phase-Dependent Photocurrent Generation in Polymer/Fullerene Bulk Heterojunction Solar Cells , 2011 .

[43]  Mikkel Jørgensen,et al.  Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods. , 2011, ACS nano.

[44]  M. Wienk,et al.  Quantifying Bimolecular Recombination Losses in Organic Bulk Heterojunction Solar Cells , 2011, Advanced materials.

[45]  Alan J. Heeger,et al.  Recombination in polymer-fullerene bulk heterojunction solar cells , 2010 .

[46]  Richard H. Friend,et al.  Direct Measurement of Electric Field‐Assisted Charge Separation in Polymer:Fullerene Photovoltaic Diodes , 2010, Advanced materials.

[47]  Helmut Neugebauer,et al.  Charge Carrier Lifetime and Recombination in Bulk Heterojunction Solar Cells , 2010, IEEE Journal of Selected Topics in Quantum Electronics.

[48]  C. Brabec,et al.  Recombination‐Limited Photocurrents in Low Bandgap Polymer/Fullerene Solar Cells , 2009 .

[49]  Donal D. C. Bradley,et al.  Bimolecular recombination losses in polythiophene: Fullerene solar cells , 2008 .

[50]  Jan Genoe,et al.  Solar cells utilizing small molecular weight organic semiconductors , 2007 .

[51]  P. Blom,et al.  Origin of the Reduced Fill Factor and Photocurrent in MDMO‐PPV:PCNEPV All‐Polymer Solar Cells , 2007 .

[52]  R. Janssen,et al.  Time delayed collection field experiments on polymer: fullerene bulk-heterojunction solar cells , 2006 .

[53]  Ronald Österbacka,et al.  Charge carrier mobility and lifetime versus composition of conjugated polymer/fullerene bulk-heterojunction solar cells , 2006 .

[54]  A. Walker,et al.  Dynamical Monte Carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology. , 2005, Nano letters.

[55]  V. Mihailetchi,et al.  Space-charge limited photocurrent. , 2005, Physical review letters.

[56]  Valentin D. Mihailetchi,et al.  Light intensity dependence of open-circuit voltage of polymer: fullerene solar cells , 2005 .

[57]  V. Mihailetchi,et al.  Photocurrent generation in polymer-fullerene bulk heterojunctions. , 2004, Physical review letters.

[58]  S. Patil,et al.  Semiconducting Polymer Nanospheres in Aqueous Dispersion Prepared by a Miniemulsion Process , 2002 .

[59]  Katharina Landfester,et al.  The generation of nanoparticles in miniemulsions. , 2001 .

[60]  J. J. M. Vleggaar,et al.  Electron and hole transport in poly(p‐phenylene vinylene) devices , 1996 .

[61]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.