Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: N2 plasma treatment.

Fouling is the major obstacle in membrane processes applied in water and wastewater treatment. The polypropylene hollow fiber microporous membranes (PPHFMMs) were surface modified by N(2) low-temperature plasma treatment to improve the antifouling characteristics. Morphological changes on the membrane surface were characterized by field emission scanning electron microscopy (FE-SEM). The change of surface wettability was monitored by contact angle measurements. The static water contact angle of the modified membrane reduced obviously; the relative pure water flux of the modified membranes increased with the increase of plasma treatment time. To assess the relation between plasma treatment and membrane fouling in a submerged membrane bioreactor (SMBR), filtration of activated sludge was carried out by using synthetic wastewater. After continuous operation in the SMBR for about 90 h, flux recoveries for the N(2) plasma-treated PPHFMM for 8 min were 62.9% and 67.8% higher than those of the virgin membrane after water and NaOH cleaning. The irreversible fouling resistance decreased after plasma treatment.

[1]  P. Favia,et al.  Tuning the Acid/Base Surface Character of Carbonaceous Materials by Means of Cold Plasma Treatments , 2006 .

[2]  Seoktae Kang,et al.  Mitigated membrane fouling in a vertical submerged membrane bioreactor (VSMBR) , 2006 .

[3]  E. R. Fisher,et al.  Modification of porous poly(ether sulfone) membranes by low‐temperature CO2‐plasma treatment , 2002 .

[4]  I. Gancarz,et al.  Modification of polysulfone membranes: 3. effect of nitrogen plasma , 2000 .

[5]  K. Yasuda,et al.  Polymerization of Acrylic Acid on Expanded Poly(tetrafluoroethylene) Tube by APGD Plasma Treatment , 2006 .

[6]  Oluwaseun O. Ogunbiyi,et al.  Methods Employed for Control of Fouling in MF and UF Membranes: A Comprehensive Review , 2005 .

[7]  H. Krieg,et al.  Use of chitosan as an antifouling agent in a membrane bioreactor , 2005 .

[8]  G. Poletti,et al.  Wettability and Dyeability Modulation of Poly(ethylene terephthalate) Fibers through Cold SF6 Plasma Treatment , 2005 .

[9]  Zhi‐Kang Xu,et al.  Surface modification of polypropylene microporous membranes with a novel glycopolymer , 2005 .

[10]  A Pollice,et al.  Physical characteristics of the sludge in a complete retention membrane bioreactor. , 2007, Water research.

[11]  Christelle Wisniewski,et al.  Physical properties of activated sludge in a submerged membrane bioreactor and relation with membrane fouling , 2007 .

[12]  David F. Fletcher,et al.  Fouling Control in a Submerged Flat Sheet Membrane System: Part II—Two‐Phase Flow Characterization and CFD Simulations , 2006 .

[13]  G. Belfort,et al.  Kinetics of Membrane Flux Decline: The Role of Natural Colloids and Mitigation via Membrane Surface Modification , 2005 .

[14]  Rong Wang,et al.  Development of a novel electrophoresis-UV grafting technique to modify PES UF membranes used for NOM removal , 2006 .

[15]  Sung Soo Kim,et al.  Surface modification of polypropylene membrane by low-temperature plasma treatment , 2001 .

[16]  Anthony G. Fane,et al.  Operation of Membrane Bioreactor with Powdered Activated Carbon Addition , 2006 .

[17]  Jaeweon Cho,et al.  Occurrence and removal of pharmaceuticals and endocrine disruptors in South Korean surface, drinking, and waste waters. , 2007, Water research.

[18]  Yoshimasa Watanabe,et al.  Membrane fouling in pilot-scale membrane bioreactors (MBRs) treating municipal wastewater. , 2005, Environmental science & technology.

[19]  Swee Hin Teoh,et al.  Nanofibrous modification on ultra-thin poly(e-caprolactone) membrane via electrospinning , 2007 .

[20]  K. Neoh,et al.  Modification of Poly(ether imide) Membranes via Surface-Initiated Atom Transfer Radical Polymerization , 2006 .

[21]  N. V. Ndinisa,et al.  Fouling Control in a Submerged Flat Sheet Membrane System: Part I – Bubbling and Hydrodynamic Effects , 2006 .

[22]  I. Gancarz,et al.  Modification of polysulfone membranes 1. CO2 plasma treatment , 1999 .

[23]  K. Choo,et al.  Hydrodynamic behavior of anaerobic biosolids during crossflow filtration in the membrane anaerobic bioreactor , 1998 .

[24]  S. H. Kim,et al.  Effects of surface modification of the membrane in the ultrafiltration of waste water , 2004 .

[25]  D. J. Upadhyay,et al.  Pervaporation studies of gaseous plasma treated PVA membrane , 2004 .

[26]  Y. Watanabe,et al.  Membrane biofouling in pilot-scale membrane bioreactors (MBRs) treating municipal wastewater: impact of biofilm formation. , 2007, Environmental science & technology.

[27]  Zhi-Kang Xu,et al.  Flux enhancement for polypropylene microporous membrane in a SMBR by the immobilization of poly(N-vinyl-2-pyrrolidone) on the membrane surface , 2006 .

[28]  D. Jenkins,et al.  Influence of mixed liquor properties and aeration intensity on membrane fouling in a submerged membrane bioreactor at high mixed liquor suspended solids concentrations. , 2007, Water research.

[29]  Sung Soo Kim,et al.  Plasma treatment of polypropylene and polysulfone supports for thin film composite reverse osmosis membrane , 2006 .

[30]  Improving Performance of a Dense Membrane Reactor for Thermal Decomposition of CO2 via Surface Modification , 2007 .