In-situ monitoring of carbon fiber-reinforced plastic manufacturing using electrical resistance during infusion

[1]  N. Takeda,et al.  Consolidation deformation of composite corner depending on compression force during layup: in situ monitoring using fiber-optic-based embeddable shape sensor , 2022, Composites Part A: Applied Science and Manufacturing.

[2]  Yishou Wang,et al.  On-Site Monitoring of Composite Bolted Joints Looseness Using CB/PVP Nanocomposite Piezoresistive Sensor , 2022, IEEE Sensors Journal.

[3]  X. Qing,et al.  Monitoring of three-dimensional resin flow front using hybrid piezoelectric-fiber sensor network in a liquid composite molding process , 2022, Composites Science and Technology.

[4]  D. Bhattacharyya,et al.  Facile Fabrication of Flexible Piezo-resistive Pressure Sensor Array Using Reduced Graphene Oxide Foam and Silicone Elastomer , 2022, Sensors and Actuators A: Physical.

[5]  F. Larsson,et al.  Experimental and computational characterization of carbon fibre based structural battery electrode laminae , 2022, Composites Science and Technology.

[6]  Jinyang Zheng,et al.  Curing quality monitoring and loading detection of composite structures with embedded capacitive sensor array , 2022, Materials & Design.

[7]  D. Rajak,et al.  Manufacturing Technologies of Carbon/Glass Fiber-Reinforced Polymer Composites and Their Properties: A Review , 2021, Polymers.

[8]  Se Youn Cho,et al.  Strategies for the production of PAN-Based carbon fibers with high tensile strength , 2021, Carbon.

[9]  Yishou Wang,et al.  Cure monitoring and damage identification of CFRP using embedded piezoelectric sensors network. , 2021, Ultrasonics.

[10]  Young-Bin Park,et al.  Novel Structural Health Monitoring Method for CFRPs Using Electrical Resistance Based Probabilistic Sensing Cloud , 2021 .

[11]  M. Quaresimin,et al.  Influence of manufacturing-induced defects on the fatigue performances of autoclave moulded laminates , 2021, Advanced Manufacturing: Polymer & Composites Science.

[12]  Ming Chen,et al.  Effects of drilling strategies for CFRP/Ti stacks on static mechanical property and fatigue behavior of open-hole CFRP laminates , 2021 .

[13]  J. Kweon,et al.  Effects of consolidation processing parameters on the surface morphology and void content of braided thermoplastic composite tubes , 2021, Functional Composites and Structures.

[14]  A. Herrmann,et al.  Using piezoresistive pressure sensors for resin flow monitoring in wind turbine blades , 2020 .

[15]  S. Bickerton,et al.  An objective comparison of common vacuum assisted resin infusion processes , 2019, Composites Part A: Applied Science and Manufacturing.

[16]  Robynne E. Murray,et al.  Fusion joining of thermoplastic composite wind turbine blades: Lap-shear bond characterization , 2019, Renewable Energy.

[17]  I. Manas‐Zloczower,et al.  Effect of carbon nanotube morphology on properties in thermoplastic elastomer composites for strain sensors , 2019, Composites Part A: Applied Science and Manufacturing.

[18]  Sida Luo,et al.  Carbon nanomaterials enabled fiber sensors: A structure-oriented strategy for highly sensitive and versatile in situ monitoring of composite curing process , 2019, Composites Part B: Engineering.

[19]  A. Skordos,et al.  A novel dielectric sensor for process monitoring of carbon fibre composites manufacture , 2019, Composites Part A: Applied Science and Manufacturing.

[20]  M. Quaresimin,et al.  Modelling the electrical resistance change in a multidirectional laminate with a delamination , 2018, Composites Science and Technology.

[21]  Li Ma,et al.  Influence of manufacturing defects on modal properties of composite pyramidal truss-like core sandwich cylindrical panels , 2017 .

[22]  R. Polanský,et al.  Development of a measuring system for on-line in situ monitoring of composite materials manufacturing , 2016 .

[23]  M. Quaresimin,et al.  Health monitoring of cross-ply laminates: Modelling the correlation between damage evolution and electrical resistance change , 2016 .

[24]  Jenn‐Ming Yang,et al.  The effect of gauge length on tensile strength and Weibull modulus of polyacrylonitrile (PAN)- and pitch-based carbon fibers , 2011, Journal of Materials Science.

[25]  Shiv P. Joshi,et al.  Damage detection in CFRP by electrical conductivity mapping , 2001 .