Digitally positioned micromirror for open-loop controlled applications

The power consumption and complexity of the close-loop control electronics are the major barriers that limit the applications of optical switches, beam steering devices and other micromirrors. To eliminate or lower the barriers, it is desirable to have a micromirror with precise, digitally positioned angles. This paper reports the first investigation to design a digitally positioned micromirror and characterize its precision levels. From the experimental results, very encouraging results have been reported for the first designed digital micromirror: +/-0.01/spl deg/ position precision has been achieved with the mirrors fabricated in the same batch but operated sporadically over a 3-month period. In order to reduce the number of the electrical drives for the mirror and increase the maximum tilting angle, an improved device was designed and tested. 0.02/spl deg//V precision has been demonstrated in the digital levels via experimental testing and +/-0.03/spl deg/ position precision of repeatability has been achieved within the angle range +/-3.5/spl deg/. The electrical-mechanical performance of the mirror is discussed here. Standard deviation of average angle and angle variance per driving voltage within the digital levels are identified to characterize the digital behavior of the mirror.

[1]  W. Dötzel,et al.  Experimental adaptation of model parameters for microelectromechanical systems (MEMS) , 1997 .

[2]  W. F. Riley,et al.  Statics and Mechanics of Materials: An Integrated Approach , 1996 .

[3]  M.C. Wu,et al.  Two-dimensional optical scanner with large angular rotation realized by self-assembled micro-elevator , 1998, 1998 IEEE/LEOS Summer Topical Meeting. Digest. Broadband Optical Networks and Technologies: An Emerging Reality. Optical MEMS. Smart Pixels. Organic Optics and Optoelectronics (Cat. No.98TH8369).

[4]  Yee Loy Lam,et al.  A STUDY OF THE STATIC CHARACTERISTICS OF A TORSIONAL MICROMIRROR , 2001 .

[5]  L.Y. Lin,et al.  Optical crossconnects of reduced complexity for WDM networks with bidirectional symmetry , 1998, IEEE Photonics Technology Letters.

[6]  Stella W. Pang,et al.  High-aspect-ratio Si vertical micromirror arrays for optical switching , 1998 .

[7]  Victor M. Bright,et al.  Micromachined, flip–chip assembled, actuatable contacts for use in high density interconnection in electronics packaging , 2001 .

[8]  Francesco Masetti,et al.  Design and implementation of a fully reconfigurable all-optical crossconnect for high capacity multiwavelength transport networks , 1996 .

[9]  Kam Y. Lau,et al.  A FLAT HIGH-FREQUENCY SCANNING MICROMIRROR , 2000 .

[10]  O. Degani,et al.  Pull-in study of an electrostatic torsion microactuator , 1998 .

[11]  W. Piyawattanametha,et al.  MEMS Technology for Optical Crosslink for Micro / Nano Satellites , 1998 .

[12]  Piet Demeester,et al.  Toward wide-scale all-optical transparent networking: the ACTS optical pan-European network (OPEN) project , 1998, IEEE J. Sel. Areas Commun..

[13]  C. R. Giles,et al.  Fully provisioned 112/spl times/112 micro-mechanical optical crossconnect with 35.8 Tb/s demonstrated capacity , 2000, Optical Fiber Communication Conference. Technical Digest Postconference Edition. Trends in Optics and Photonics Vol.37 (IEEE Cat. No. 00CH37079).

[14]  David J. Bishop,et al.  Lucent Microstar micromirror array technology for large optical crossconnects , 2000, SPIE MOEMS-MEMS.

[15]  P. Green,et al.  Progress in optical networking , 2001, IEEE Commun. Mag..

[16]  H. Fujita,et al.  Electrostatic micro torsion mirrors for an optical switch matrix , 1996 .

[17]  Martin T. Hagan,et al.  Neural network design , 1995 .