MFIX simulation of NETL/PSRI challenge problem of circulating fluidized bed

In this paper, numerical simulations of NETL/PSRI challenge problem of circulating fluidized bed (CFB) using the open-source code Multiphase Flow with Interphase eXchange (MFIX) are reported. Two rounds of simulation results are reported including the first-round blind test and the second-round modeling refinement. Three-dimensional high fidelity simulations are conducted to model a 12-inch diameter pilot-scale CFB riser. Detailed comparisons between numerical results and experimental data are made with respect to axial pressure gradient profile, radial profiles of solids velocity and solids mass flux along different radial directions at various elevations for operating conditions covering different fluidization regimes. Overall, the numerical results show that CFD can predict the complex gas–solids flow behavior in the CFB riser reasonably well. In addition, lessons learnt from modeling this challenge problem are presented.

[1]  D. Jeffrey,et al.  Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield , 1984, Journal of Fluid Mechanics.

[2]  Madhava Syamlal,et al.  Evaluation of boundary conditions used to model dilute, turbulent gas/solids flows in a pipe , 2005 .

[3]  John R. Grace,et al.  On the superficial gas velocity in deep gas–solids fluidized beds , 2011 .

[4]  John R. Grace,et al.  Verification and validation of CFD models and dynamic similarity for fluidized beds , 2004 .

[5]  R. Jackson,et al.  Frictional–collisional constitutive relations for granular materials, with application to plane shearing , 1987, Journal of Fluid Mechanics.

[6]  Balaji Gopalan,et al.  A new method for decomposition of high speed particle image velocimetry data , 2012 .

[7]  M. Syamlal,et al.  MFIX documentation theory guide , 1993 .

[8]  S. Armfield,et al.  A representation of curved boundaries for the solution of the Navier-Stokes equations on a staggered three-dimensional Cartesian grid , 2003 .

[9]  Tingwen Li,et al.  Revisiting Johnson and Jackson boundary conditions for granular flows , 2012 .

[10]  John R. Grace,et al.  Numerical investigation of gas mixing in gas-solid fluidized beds , 2010 .

[11]  John R. Grace,et al.  Study of wall boundary condition in numerical simulations of bubbling fluidized beds , 2010 .

[12]  Madhava Syamlal,et al.  High-Resolution Simulations of Coal Injection in A Gasifier , 2010 .

[13]  Sankaran Sundaresan,et al.  Coarse-Grid Simulation of Gas-Particle Flows in Vertical Risers , 2005 .

[14]  Rui Xiao,et al.  Modeling on the Hydrodynamics of a High-Flux Circulating Fluidized Bed with Geldart Group A Particles by Kinetic Theory of Granular Flow , 2010 .

[15]  Lawrence J. Shadle,et al.  Improvement of continuous solid circulation rate measurement in a cold flow circulating fluidized bed , 2008 .

[16]  Rui Xiao,et al.  Modeling on High-Flux Circulating Fluidized Bed with Geldart Group B Particles by Kinetic Theory of Granular Flow , 2010 .

[17]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[18]  M. Syamlal,et al.  The effect of numerical diffusion on simulation of isolated bubbles in a gas-solid fluidized bed , 2001 .