Finite elements based on a first-order shear deformation moderate rotation shell theory with applications to the analysis of composite structures

The first-order shear deformation moderate rotation shell theory of Schmidt and Reddy [R. Schmidt and J. N. Reddy, J. Appl. Mech. 55, 611–617 (1988)] is used as a basis for the development of finite element models for the analysis of the static, geometrically non-linear response of anisotropic and laminated structures. The incremental, total Lagrangian formulation of the theory is developed, and numerical solutions are obtained by using the isoparametric Lagrangian 9-node and Serendipity 8-node shell finite elements. Various integration schemes (full, selective reduced, and uniformly reduced integration) are applied in order to detect and to overcome the effects of shear and membrane locking on the predicted structural response. A number of sample problems of isotropic, orthotropic, and multi-layered structures are presented to show the accuracy of the present theory. The von Karman-type first-order shear deformation shell theory and continuum 2D theory are used for comparative analyses.

[1]  Degenerated isoparametric finite elements in nonlinear analysis of 2D-problems , 1991 .

[2]  L. Librescu,et al.  Higher-Order Moderate Rotation Theories for Elastic Anisotropic Plates , 1986 .

[3]  G R Heppler,et al.  A Mindlin element for thick and deep shells , 1986 .

[4]  R. L. Harder,et al.  A proposed standard set of problems to test finite element accuracy , 1985 .

[5]  J. C. Simo,et al.  On a stress resultant geometrically exact shell model. Part II: the linear theory; computational aspects , 1989 .

[6]  P. G. Bergan,et al.  Nonlinear analysis of free-form shells by flat finite elements , 1978 .

[7]  J. C. Simo,et al.  On a stress resultant geometrically exact shell model. Part III: computational aspects of the nonlinear theory , 1990 .

[8]  A. B. Sabir,et al.  The applications of finite elements to large deflection geometrically nonlinear behaviour of cylindrical shells , 1972 .

[9]  Rüdiger Schmidt,et al.  A Refined Small Strain and Moderate Rotation Theory of Elastic Anisotropic Shells , 1988 .

[10]  R. Schmidt.  A current trend in shell theory: Constrained geometrically nonlinear Kirchhoff-Love type theories based on polar decomposition of strains and rotations , 1985 .

[11]  J. N. Reddy,et al.  On a moderate rotation theory of laminated anisotropic shells—Part 2. Finite-element analysis , 1990 .

[12]  J. N. Reddy,et al.  On a moderate rotation theory of laminated anisotropic shells—Part 1. Theory☆ , 1990 .

[13]  Rüdiger Schmidt,et al.  Refined theories of elastic anisotropic shells accounting for small strains and moderate rotations , 1988 .

[14]  H. Saunders,et al.  Finite element procedures in engineering analysis , 1982 .

[15]  Carlos Alberto Brebbia,et al.  Variational Methods in Engineering , 1985 .

[16]  W. Pietraszkiewicz.  On Entirely Lagrangian Displacemental Form of Non-Linear Shell Equations , 1984 .

[17]  Ekkehard Ramm,et al.  Strategies for Tracing the Nonlinear Response Near Limit Points , 1981 .

[18]  W. Pietraszkiewicz,et al.  Variational principles in the geometrically non-linear theory of shells undergoing moderate rotations , 1981 .

[19]  J. Z. Zhu,et al.  The finite element method , 1977 .

[20]  Chung-Li Liao.  An incremental total Lagrangian formulation for general anisotropic shell-type structures , 1987 .

[21]  K. Sawamiphakdi,et al.  Large deformation analysis of laminated shells by ftnife element method , 1981 .