Advanced control for fuel cells connected to a DC/DC converter and an electric motor

The transient behavior of a polymer electrolyte membrane fuel cells (PEMFC) system under an improved adaptive predictive control with robust filter (APCWRF) is analyzed using a nonlinear dynamic, control-oriented model. Sudden changes in the stack current are associated with the abrupt changes in the power demanded by the electric motor of a vehicle, powered by the PEMFC. The APCWRF is designed for controlling the compressor motor voltage. Because of the wide working range the control algorithm is improved accounting three different zones supported by three nominal models. It is specially thought to achieve a better efficiency and to maintain the necessary level of the oxygen in the cathode to prevent short circuit and membrane damage. A DC/DC converter is connected to the electric motor. It is used as an actuator in a cascade control loop to regulate the torque output of a DC electric motor with a PI controller in the external loop. Several results are presented considering the PEMFC with the APCWRF showing its potentiality for a wide working range imposed by two types of DC motors.

[1]  Claire H. Woo,et al.  PEM fuel cell current regulation by fuel feed control , 2007 .

[2]  Cláudio Augusto Oller do Nascimento,et al.  10th international symposium on process systems engineering , 2009 .

[3]  Alejandro Ceccatto,et al.  Robust adaptive predictive fault-tolerant control integrated to a fault-detection system applied to a nonlinear chemical process , 2007 .

[4]  Anna G. Stefanopoulou,et al.  Control of Fuel Cell Power Systems: Principles, Modeling, Analysis and Feedback Design , 2004 .

[5]  M. Basualdo,et al.  Analysis of the control structures for an integrated ethanol processor for proton exchange membrane fuel cell systems , 2009 .

[6]  Fu-Cheng Wang,et al.  An application of indirect model reference adaptive control to a low-power proton exchange membrane fuel cell , 2008 .

[7]  Mica Grujicic,et al.  Control of the transient behaviour of polymer electrolyte membrane fuel cell systems , 2004 .

[8]  Sigurd Skogestad,et al.  Control of fuel cell power output , 2007 .

[9]  Guidong Liu,et al.  Adaptive control of the airflow of a PEM fuel cell system , 2008 .

[10]  Carlos Bordons,et al.  Design and experimental validation of a constrained MPC for the air feed of a fuel cell , 2009 .

[11]  Maurice Fadel,et al.  Modelling and control of a Fuel Cell System and Storage Elements in transport applications , 2005 .

[12]  David Zumoffen,et al.  An approach to improve the performance of adaptive predictive control systems: theory, simulations and experiments , 2006 .

[13]  Marta Basualdo,et al.  Control Oriented Dynamic Rigorous Model of a Fuel Processor System and Fuel Cell Stack , 2009 .

[14]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[15]  E H Law,et al.  Model-based control strategies in the dynamic interaction of air supply and fuel cell , 2004 .

[16]  Ioannis G. Kevrekidis,et al.  The dynamic response of PEM fuel cells to changes in load , 2005 .

[17]  Jenn-Jiang Hwang,et al.  Multi-loop nonlinear predictive control scheme for a simplistic hybrid energy system , 2009 .

[18]  Amos Ben-Zvi,et al.  Identifiability and estimability study for a dynamic solid oxide fuel cell model , 2009, Comput. Chem. Eng..