Chemical Mechanical Polishing (CMP) is the essential process for planarization of wafer surface in semiconductor manufacturing. CMP process helps to produce smaller ICs with more electronic circuits improving chip speed and performance. CMP also helps to increase throughput and yield, which results in reduction of IC manufacturer’s total production costs. CMP simulation model will help to early predict CMP manufacturing hotspots and minimize the CMP and CMP induced Lithography and Etch defects [2]. In the advanced process nodes, conventional dummy fill insertion for uniform density is not able to address all the CMP short-range, long-range, multi-layer stacking and other effects like pad conditioning, slurry selectivity, etc. In this paper, we present the flow for 20nm CMP modeling using Mentor Graphics CMP modeling tools to build a multilayer Cu-CMP model and study hotspots. We present the inputs required for good CMP model calibration, challenges faced with metrology collections and techniques to optimize the wafer cost. We showcase the CMP model validation results and the model applications to predict multilayer topography accumulation affects for hotspot detection. We provide the flow for early detection of CMP hotspots with Calibre CMPAnalyzer to improve Design-for-Manufacturability (DFM) robustness.