Productivity estimations for vertically fractured wells with asymmetrical multiple fractures

Abstract Through hydraulically fracturing, vertical wells can also create a region of stimulated reservoir volume (SRV) to enhance ultimate recovery. Thus, implementing SRV measures on old vertical wells is being common practices in Chinese oilfield, Ordos Basin. It is a significant problem that should be solved urgently about how to estimate productivities of vertical wells with SRV. Microseismic fracture imaging strongly shows multiple fractures (MF) can develop during SRV treatments. However, most of the published works on the productivities of vertically fractured wells assumed the wells contained a single and symmetrical fracture, and little work in literature has focused on asymmetrical MF. To study this problem thoroughly, the paper proposed an approximate analytical productivity equation for fractured wells with asymmetrical MF in low-permeability and anisotropic cylinder-shaped formations, using conformal mapping and mirror reflection. Based on analytical and numerical methods, equation validations are conducted by comparing the results of proposed solutions with analytical/numerical solutions. In addition, the effects of some critical parameters on productivity have been investigated: average MF conductivity, average MF penetration ratio, fracture asymmetry, and MF number. Results show that there is a good consistence between the results of proposed solutions and analytical/numerical solutions for fractured wells. The fractured well productivity is a weak function of average MF penetration ratio; it is a stronger function of average MF conductivity, and MF number. The fractured well productivity increases as: average MF penetration ratio increases, average MF conductivity increases, and MF number increases. The effect on fractured well productivity appears to be weaker as: average MF conductivity increases, and average MF number increases. Additionally, for a single-fracture well, the productivity can decrease by about 8%, when asymmetry ratio increases from 0 to 0.8.

[1]  Michael J. Economides,et al.  A parametric comparison of horizontal and vertical well performance , 1991 .

[2]  J. Hagoort,et al.  A simplified analytical method for estimating the productivity of a horizontal well producing at constant rate or constant pressure , 2009 .

[3]  Christopher A. Wright,et al.  Integrating Fracture Mapping Technologies To Improve Stimulations in the Barnett Shale , 2005 .

[4]  Djebbar Tiab,et al.  Multiple Fractures Transient Response , 2009 .

[5]  Christopher A. Wright,et al.  Optimizing Horizontal Completion Techniques in the Barnett Shale Using Microseismic Fracture Mapping , 2004 .

[6]  Leonid N. Germanovich,et al.  Hydraulic fracture with multiple segments II. Modeling , 1997 .

[7]  Soheil Mohammadi,et al.  Non-uniform isentropic gas flow analysis of explosion in fractured solid media , 2007 .

[8]  Erkan Fidan,et al.  First Downhole Application of Distributed Acoustic Sensing for Hydraulic-Fracturing Monitoring and Diagnostics , 2012 .

[9]  Guicai Zhang,et al.  Branch Fractures in Oriented Hydraulic Fracturing, Modeling, and Experiments , 2014 .

[10]  Y. K. Choo,et al.  Transient Pressure Behavior of Multiple-Fractured Gas Wells , 1987 .

[11]  M. Rahman,et al.  Enhancing Oil Production from Tight Formations Under a Reverse Faulting Stress Regime by Multistage Fracturing , 2013 .

[12]  Leonid N. Germanovich,et al.  Hydraulic fracture with multiple segments I. Observations and model formulation , 1997 .

[13]  Jiten D. Kaura,et al.  DTS Monitoring of Hydraulic Fracturing: Experiences and Lessons Learned , 2008 .

[14]  Thomas Alwin Blasingame,et al.  Constant-Rate Drawdown Solutions Derived for Multiple Arbitrarily-Oriented Uniform-Flux, Infinite-Conductivity, or Finite-Conductivity Fractures in an Infinite-Slab Reservoir , 2006 .

[15]  A. C. Gringarten,et al.  Comparison of Well Productivity Between Vertical, Horizontal and Hydraulically Fractured Wells in Gas-Condensate Reservoirs , 2005 .

[16]  M. Y. Xu,et al.  A Model for Gas Deliverability from Fractured Horizontal Wells in a Tight Gas Reservoir , 2014 .

[17]  Lei Wang,et al.  Type Curves Analysis for Asymmetrically Fractured Wells , 2014 .

[18]  M. Prats.  Effect of Vertical Fractures on Reservoir Behavior-Incompressible Fluid Case , 1961 .

[19]  Michael J. Mayerhofer,et al.  Integration of Microseismic-Fracture-Mapping Results With Numerical Fracture Network Production Modeling in the Barnett Shale , 2006 .

[20]  Djebbar Tiab,et al.  Evaluation of Fracture Asymmetry of Finite-Conductivity Fractured Wells , 2010 .