Dual-Polarized Band-Absorptive Frequency Selective Rasorber Using Meander-Line and Lumped Resistors

A novel dual-polarized band-absorptive frequency selective rasorber (FSR) is proposed in this communication. The FSR is constructed by two-layer cascaded printed circuit boards, in which meander-line square loops with and without lumped resistors loaded on the top and bottom surfaces of the two substrates. Its operating principle is analyzed, and an accurate equivalent circuit model is presented. A prototype has been fabricated, assembled, and measured. The measured absorption band is from 4.8 to 6.81 GHz (34.6%), with a thickness of $\lambda _{\mathrm {a}}$ /8 at 4.8 GHz. Moreover, it is almost transparent to electromagnetic waves below 1.54 GHz. The measurement results achieve a good agreement with the simulated results, which verifies the effectiveness of the design.

[1]  B. A. Munk.  Metamaterials: Critique and Alternatives , 2009 .

[2]  K. L. Ford,et al.  Oblique Incidence Performance of a Novel Frequency Selective Surface Absorber , 2007, IEEE Transactions on Antennas and Propagation.

[3]  Ke Wu,et al.  Theory and experiment of novel frequency selective surface based on substrate integrated waveguide technology , 2005, IEEE Transactions on Antennas and Propagation.

[4]  Yunqi Fu,et al.  Design of Absorptive/Transmissive Frequency-Selective Surface Based on Parallel Resonance , 2017, IEEE Transactions on Antennas and Propagation.

[5]  Wen Jiang,et al.  Design Bandpass Frequency Selective Surface Absorber Using LC Resonators , 2017, IEEE Antennas and Wireless Propagation Letters.

[6]  Shaoqiu Xiao,et al.  Frequency-Selective Rasorber Based on Square-Loop and Cross-Dipole Arrays , 2014, IEEE Transactions on Antennas and Propagation.

[7]  Wei Hong,et al.  Design and Experimental Verification of Compact Frequency-Selective Surface With Quasi-Elliptic Bandpass Response , 2007, IEEE Transactions on Microwave Theory and Techniques.

[8]  Zhongxiang Shen,et al.  3-D Frequency-Selective Rasorber With Wide Upper Absorption Band , 2017, IEEE Transactions on Antennas and Propagation.

[9]  Ke Wu,et al.  Filtenna Consisting of Horn Antenna and Substrate Integrated Waveguide Cavity FSS , 2007, IEEE Transactions on Antennas and Propagation.

[10]  Zhongxiang Shen,et al.  Wideband 3D Frequency Selective Rasorber , 2014, IEEE Transactions on Antennas and Propagation.

[11]  Zhongxiang Shen,et al.  Absorptive Frequency-Selective Transmission Structure With Square-Loop Hybrid Resonator , 2017, IEEE Antennas and Wireless Propagation Letters.

[12]  Ben A. Munk,et al.  Frequency Selective Surfaces: Theory and Design , 2000 .

[13]  K.P. Esselle,et al.  A novel absorb/transmit FSS for secure indoor wireless networks with reduced multipath fading , 2006, IEEE Microwave and Wireless Components Letters.

[14]  F. Costa,et al.  A Frequency Selective Radome With Wideband Absorbing Properties , 2012, IEEE Transactions on Antennas and Propagation.

[15]  Zhongxiang Shen,et al.  Wideband Microwave Absorber Based on a Two-Dimensional Periodic Array of Microstrip Lines , 2010, IEEE Transactions on Antennas and Propagation.

[16]  Yunqi Fu,et al.  A Miniaturized Absorptive Frequency Selective Surface , 2015, IEEE Antennas and Wireless Propagation Letters.

[17]  Zhongxiang Shen,et al.  Absorptive Frequency-Selective Reflection and Transmission Structures , 2017, IEEE Transactions on Antennas and Propagation.

[18]  Jiang Wang,et al.  3-D Frequency Selective Rasorber: Concept, Analysis, and Design , 2016, IEEE Transactions on Microwave Theory and Techniques.