‘‘Clean’’ processing of polymers and smoothing of ceramics by pulsed laser melting

Surface stability during laser pulsed melting of polymers and ceramics is studied theoretically. Irradiation conditions and material parameters are found giving rise to the suppression of surface wavy relief of a nonresonant type (with period Λ≫λ, where λ is the radiation wavelength) and thus to the smooth flat irradiation spots. For example, for the polymers considered this process takes place for wavelengths where the absorption coefficient is sufficiently high: α(λ)≳105 cm−1. Thus, it is shown that the formation of such spots, previously referred to as ‘‘clean ablation,’’ can be explained using only a thermal mechanism without reference to the concept of ‘‘photodecomposition.’’ Moreover, laser smoothing and polishing of a surface, if it had roughness before irradiation, can be achieved by appropriate matching of the characteristic size of this roughness along the surface with the values of α(λ) and laser fluence. Methods are proposed to decrease the parasitic influence of droplets on the deposition of ...

[1]  Akira Yabe,et al.  Application of Excimer Laser Polymer Ablation to Alignment of Liquid Crystals: Periodic Microstructure on Polyethersulfone , 1989 .

[2]  G. Koren,et al.  Emission spectra and etching of polymers and graphite irradiated by excimer lasers , 1984 .

[3]  S. D. Jenkins,et al.  Development and origin of conical structures on XeCl laser ablated polyimide , 1986 .

[4]  S. Ogale,et al.  Pulsed laser etching of high Tc superconducting films , 1987 .

[5]  H. Philipp,et al.  Dependence of photoetching rates of polymers at 193 nm on optical absorption depth , 1986 .

[6]  S. Lazare,et al.  Empirical photoablation rate model exemplified with the etching of polyphenylquinoxaline , 1989 .

[7]  Michael O. Thompson,et al.  Temperature measurements of polyimide during KrF excimer laser ablation , 1992 .

[8]  Akira Yabe,et al.  Morphological modification ablated on poly(ethylene 2,6-naphthalate) by excimer lasers. , 1989 .

[9]  J. F. Flintoff,et al.  High-quality optical and epitaxial Ge films formed by laser evaporation , 1989 .

[10]  J. Brannon,et al.  Excimer laser etching of polyimide , 1985 .

[11]  Akira Yabe,et al.  Periodic morphological modification developed on the surface of polyethersulfone by XeCl excimer laser photoablation , 1989 .

[12]  Akira Yabe,et al.  Surface morphological microstructures of poly(ethylene 2,6‐naphthalate) modified by excimer laser ablation , 1989 .

[13]  R. Srinivasan,et al.  Self-developing photoetching of poly(ethylene terephthalate) films by far-ultraviolet excimer laser radiation , 1982 .

[14]  S. Wada,et al.  Direct photoetching of polymer films using vacuum ultraviolet radiation generated by high‐order anti‐Stokes Raman scattering , 1993 .

[15]  Akira Yabe,et al.  XeCl excimer laser ablation of a polyethersulfone film: Dependence of periodic microstructures on a polarized beam , 1990 .

[16]  Clark,et al.  Ultraviolet-laser-induced periodic surface structures. , 1989, Physical review. B, Condensed matter.

[17]  H. Stiegler,et al.  Excimer laser photoablation of silicon , 1986 .

[18]  T. Bahners,et al.  Morphological changes of the surface structure of polymers due to excimer laser radiation: A synergetic effect? , 1989 .

[19]  P. H. Key,et al.  Direct etching of polymeric materials using a XeCl laser , 1983 .

[20]  G. Gorodetsky,et al.  Far UV pulsed laser melting of silicon , 1985 .

[21]  E. Petit,et al.  Structural origin of surface morphological modifications developed on poly(ethylene terephthalate) by excimer laser photoablation , 1988 .

[22]  D. E. Gray,et al.  American Institute of Physics Handbook , 1957 .

[23]  Jeff F. Young,et al.  Laser-induced periodic surface structure. I. Theory , 1983 .

[24]  V. N. Tokarev,et al.  Formation of periodic surface ripples under the action of pulsed carbon dioxide laser radiation on fused silica , 1989 .

[25]  T. A. Znotins,et al.  Excimer lasers: an emerging technology in materials processing , 1987 .

[26]  P. Dyer,et al.  Excimer laser ablation and thermal coupling efficiency to polymer films , 1985 .

[27]  Akira Yabe,et al.  Excimer Laser Ablation of Polymers and Carbon Fiber Composites , 1990 .

[28]  P. Dyer,et al.  Periodic surface structures in the excimer laser ablative etching of polymers , 1990 .

[29]  S. Lazare,et al.  Laser Ablation of Electronic Materials: Basic Mechanisms and Applications , 1992 .

[30]  I. Ursu,et al.  Studies of the change of a metallic surface microrelief as a result of multiple‐pulse action of powerful UV laser pulses , 1985 .

[31]  S. D. Jenkins,et al.  Novel method for measuring excimer laser ablation thresholds of polymers , 1988 .

[32]  H. Niino,et al.  POLYMER ABLATION UPON EXPOSURE TO VACUUM ULTRA-VIOLET LIGHT , 1992 .

[33]  Philippe M. Fauchet,et al.  Stimulated Wood's anomalies on laser-illuminated surfaces , 1986 .

[34]  I. Prigogine,et al.  Formative Processes. (Book Reviews: Self-Organization in Nonequilibrium Systems. From Dissipative Structures to Order through Fluctuations) , 1977 .

[35]  S. Namba,et al.  Effective deep ultraviolet photoetching of polymethyl methacrylate by an excimer laser , 1982 .

[36]  Akira Yabe,et al.  Excimer laser ablation of polyethersulfone derivatives: periodic morphological micro-modification on ablated surface , 1992 .

[37]  R. Srinivasan,et al.  Dynamics of UV laser ablation of organic polymer surfaces , 1986 .

[38]  M. Stuke,et al.  Ablation of polytetrafluoroethylene (Teflon) with femtosecond UV excimer laser pulses , 1989 .

[39]  R. Srinivasan,et al.  Ablative photodecomposition: action of far-ultraviolet (193 nm) laser radiation on poly(ethylene terephthalate) films , 1982 .

[40]  R. Srinivasan,et al.  Kinetics of the ablative photodecomposition of organic polymers in the far ultraviolet (193 nm) , 1983 .