A Materials Life Cycle Assessment of a Net-Zero Energy Building

This study analyzed the environmental impacts of the materials phase of a net-zero energy building. The Center for Sustainable Landscapes (CSL) is a three-story, 24,350 square foot educational, research, and administrative office in Pittsburgh, PA, USA. This net-zero energy building is designed to meet Living Building Challenge criteria. The largest environmental impacts from the production of building materials is from concrete, structural steel, photovoltaic (PV) panels, inverters, and gravel. Comparing the LCA results of the CSL to standard commercial structures reveals a 10% larger global warming potential and a nearly equal embodied energy per square feet, largely due to the CSL’s PV system. As a net-zero energy building, the environmental impacts associated with the use phase are expected to be very low relative to standard structures. Future studies will incorporate the construction and use phases of the CSL for a more comprehensive life cycle perspective.

[1]  A. Horvath,et al.  Life-Cycle Assessment of Office Buildings in Europe and the United States , 2006 .

[2]  Vasilis Fthenakis,et al.  Overview of Potential Hazards , 2003 .

[3]  Arpad Horvath,et al.  Life-Cycle Environmental Effects of an Office Building , 2003 .

[4]  Gregory A. Keoleian,et al.  Life cycle energy and environmental performance of a new university building: modeling challenges and design implications , 2003 .

[5]  A. Mikalajūnė,et al.  Investigation into heavy metal concentration by the gravel roadsides , 2011 .

[6]  Brian Norton,et al.  Life-cycle operational and embodied energy for a generic single-storey office building in the UK , 2002 .

[7]  J. Minx,et al.  A definition of “carbon footprint” , 2010 .

[8]  Melissa M. Bilec,et al.  Life cycle assessment evaluation of green product labeling systems for residential construction , 2012, The International Journal of Life Cycle Assessment.

[9]  Ravi Prakash,et al.  Life cycle energy analysis of buildings: An overview , 2010 .

[10]  R. Kannan,et al.  Life cycle assessment study of solar PV systems: An example of a 2.7 kWp distributed solar PV system in Singapore , 2006 .

[11]  Asa Jonsson,et al.  LCA of concrete and steel building frames , 1998 .

[12]  Arpad Horvath,et al.  Comparison of Environmental Effects of Steel- and Concrete-Framed Buildings , 2005 .

[13]  Tao Wang,et al.  The energy benefit of stainless steel recycling , 2008 .

[14]  Rolf Magnusson,et al.  Monitoring of dust emission on gravel roads : Development of a mobile methodology and examination of horizontal diffusion , 2009 .

[15]  Giovanni Andrea Blengini,et al.  The changing role of life cycle phases, subsystems and materials in the LCA of low energy buildings , 2010 .

[16]  D Donald.  Climate-conscious Building Design:New Approaches to Embodiedcarbon Optimization , 2011 .

[17]  Gerald Rebitzer,et al.  The ecoinvent database system: a comprehensive web-based LCA database , 2005 .

[18]  J. Al-awadhi,et al.  Impact of gravel quarrying on the desert environment of Kuwait , 2001 .

[19]  Hans-Jörg Althaus,et al.  The ecoinvent Database: Overview and Methodological Framework (7 pp) , 2005 .

[20]  J. Sanjayan,et al.  Green house gas emissions due to concrete manufacture , 2007 .

[21]  Anne Grete Hestnes,et al.  Energy use in the life cycle of conventional and low-energy buildings: A review article , 2007 .

[22]  Paul Kenny,et al.  From net energy to zero energy buildings: Defining life cycle zero energy buildings (LC-ZEB) , 2010 .

[23]  Liza O'moore,et al.  Impact of fly ash content and fly ash transportation distance on embodied greenhouse gas emissions and water consumption in concrete , 2009 .

[24]  Matjaz Prek,et al.  Environmental impact and life cycle assessment of heating and air conditioning systems, a simplified case study , 2004 .

[25]  Kevin L. Rens,et al.  High-Volume Fly Ash Concrete: Analysis and Application , 2006 .

[26]  Y. Tripanagnostopoulos,et al.  Energy, cost and LCA results of PV and hybrid PV/T solar systems , 2005 .

[27]  G. Treloar,et al.  Life-cycle energy analysis of buildings: a case study , 2000 .

[28]  B. V. Venkatarama Reddy,et al.  Embodied energy of common and alternative building materials and technologies , 2003 .

[29]  Michiya Suzuki,et al.  Estimation of life cycle energy consumption and CO2 emission of office buildings in Japan , 1998 .

[30]  John A. Gambatese,et al.  Energy Consumption of Asphalt and Reinforced Concrete Pavement Materials and Construction , 2005 .

[31]  Shabbir H. Gheewala,et al.  Environmental life cycle assessment of a commercial office building in Thailand , 2008 .

[32]  G. Norris,et al.  TRACI the tool for the reduction and assessment of chemical and other environmental impacts , 2002 .

[33]  Michael D. Lepech,et al.  Life Cycle Modeling of Concrete Bridge Design: Comparison of Engineered Cementitious Composite Link Slabs and Conventional Steel Expansion Joints , 2005 .

[34]  R. Frischknecht,et al.  Implementation of Life Cycle Impact Assessment Methods. ecoinvent report No. 3, v2.2 , 2010 .

[35]  Stéphane Citherlet,et al.  Window and advanced glazing systems life cycle assessment , 2000 .

[36]  Gian Andrea Blengini,et al.  Energy-saving policies and low-energy residential buildings: an LCA case study to support decision makers in Piedmont (Italy) , 2010 .

[37]  Melissa M. Bilec,et al.  Impact of lifetime on US residential building LCA results , 2012, The International Journal of Life Cycle Assessment.

[38]  D. Huntzinger,et al.  A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies , 2009 .